7 Jurock Flip Windshields - Victory Forums - Victory Motorcycle Forum
Reply
 
LinkBack Thread Tools Search this Thread Display Modes
post #1 of 14 (permalink) Old 08-13-2012, 10:55 AM Thread Starter
Member
 
boondocker's Avatar
 
Join Date: Jul 2012
Location: N E Pa
Posts: 35
7 Jurock Flip Windshields

Does anyone have any of these on there bikes . I am interested in seeing some pics on the xc's. The one on my Zuk was level with my eyes and worked good,tho the one on my xc is lower and really buffets my head. I see where you can do a yard stick measurement and going to measure up and order one. Or does the the flip part deflect so it can be lower? Thanks Steve
boondocker is offline  
Sponsored Links
Advertisement
 
post #2 of 14 (permalink) Old 08-13-2012, 11:43 AM
Member
 
RTNAPL's Avatar
 
Join Date: Jun 2012
Location: Savage, MN
Posts: 65
I am also interested. If I measured correct, the stock XC shield is 9 inches (going off of suspect memory.) I am wondering how much difference a flip in 9 or 10 inch will have on buffeting.

2012 Victory Cross Country (Black)

Former bike:
2005 Triumph Rocket 3 2300cc
RTNAPL is offline  
post #3 of 14 (permalink) Old 08-13-2012, 12:31 PM
RMH
Senior Member
 
Join Date: Oct 2011
Location: North Texas
Posts: 143
Tonyz posted a pic for me in the following thread...

7JUROCK now offers "Flip" Windshields

Based on discussion in that thread, I now have a 16" with flip from 7jurock on order. Expecting to get shipping notification in the next few days and hopefully have it installed sometime next week.

Cheers,
Randy

2010 Victory Cross Country - Black & Chrome

2007 Honda VTX 1300 (Traded up)
2007 Honda VT750 Shadow (Traded up)
25 years without a bike :(
Honda CB 125, 360, & 550 in my youth, late '70s - early '80s
RMH is offline  
post #4 of 14 (permalink) Old 08-13-2012, 12:45 PM Thread Starter
Member
 
boondocker's Avatar
 
Join Date: Jul 2012
Location: N E Pa
Posts: 35
RMH Thanks I would love to see a pic of it on your bike as I am sure RTNAPL would too. Happy motoring.

2012 Cross Country Red & Silver
boondocker is offline  
post #5 of 14 (permalink) Old 08-24-2012, 01:34 PM
RMH
Senior Member
 
Join Date: Oct 2011
Location: North Texas
Posts: 143
Forgot to follow up this thread after getting my new windshield.

Have had it on for a week now and it looks and works great.

I probably could have gone an inch or two shorter, but am happy with it as is.

Cheers,
Randy








2010 Victory Cross Country - Black & Chrome

2007 Honda VTX 1300 (Traded up)
2007 Honda VT750 Shadow (Traded up)
25 years without a bike :(
Honda CB 125, 360, & 550 in my youth, late '70s - early '80s
RMH is offline  
post #6 of 14 (permalink) Old 08-24-2012, 03:40 PM Thread Starter
Member
 
boondocker's Avatar
 
Join Date: Jul 2012
Location: N E Pa
Posts: 35
Randy that looks great and should do the trick.We did a 344 mile ride up thru the Finger Lakes this last weekend and It would have been more enjoyable with a taller windshield. I am 5-8 with a 30" inseam so I have a long body. I like all the add on"s on your bike it is really sharp. What kind of cup holder and Lowers are those as I am still gathering ideas for my new ride. Thanks for posting back Randy and safe riding. Steve

2012 Cross Country Red & Silver
boondocker is offline  
post #7 of 14 (permalink) Old 08-25-2012, 08:50 AM
RMH
Senior Member
 
Join Date: Oct 2011
Location: North Texas
Posts: 143
Quote:
Originally Posted by boondocker View Post
Randy that looks great and should do the trick.We did a 344 mile ride up thru the Finger Lakes this last weekend and It would have been more enjoyable with a taller windshield. I am 5-8 with a 30" inseam so I have a long body. I like all the add on"s on your bike it is really sharp. What kind of cup holder and Lowers are those as I am still gathering ideas for my new ride. Thanks for posting back Randy and safe riding. Steve
The cup holder is from Barefoot Willies... http://barefootwillies.com/
Very simple and inexpensive and works great.

The lowers are the new JTD hard lowers for the forged bars... http://www.jtdcycleparts.com/
One of the best new products for the X bikes with forged bars for those who like lowers and don't like bufetting.

Cheers,
Randy

2010 Victory Cross Country - Black & Chrome

2007 Honda VTX 1300 (Traded up)
2007 Honda VT750 Shadow (Traded up)
25 years without a bike :(
Honda CB 125, 360, & 550 in my youth, late '70s - early '80s
RMH is offline  
post #8 of 14 (permalink) Old 08-25-2012, 12:52 PM
Member
 
RTNAPL's Avatar
 
Join Date: Jun 2012
Location: Savage, MN
Posts: 65
Are those Kuryakyn mirrors?

2012 Victory Cross Country (Black)

Former bike:
2005 Triumph Rocket 3 2300cc
RTNAPL is offline  
post #9 of 14 (permalink) Old 09-26-2012, 03:37 AM
Member
 
Vortex1x's Avatar
 
Join Date: Aug 2012
Location: Long Island NY
Posts: 75
Garage
Send a message via AIM to Vortex1x
I have a 14" 7Jurock with the flip. I am 5'10". I can look over the windshield with no head buffeting. I recieved my Windshield last Wednesday, installed it and left on a 970 mile round trip weekend from Long Island NY to the Buffalo NY area. I am happy and impressed with the windshield.

Something you need to consider is lowers. The taller shield does not stop the buffeting from below. Some options are 7 Jurock lowers, both on the forks or in the square engine guards, soft lowers over the engine guards or make your own.
Attached Images
File Type: jpg 2012-09-19_16-25-21_202.jpg (32.0 KB, 24 views)
File Type: jpg 2012-09-19_16-25-31_855.jpg (28.1 KB, 19 views)

Sean


2012 Victory Cross Country Black
7Jurock 14" flip windshield w/ light gray tint
Victory Stage 1 mufflers
saddlebag liners

2006 Suzuki Boulevard C50T (traded)
Vortex1x is offline  
post #10 of 14 (permalink) Old 10-10-2012, 10:53 AM
Junior Member
 
Woody31971's Avatar
 
Join Date: Jul 2011
Location: New Harmony, IN
Posts: 14
7 Jurock

I know this is going to come down to a matter of opinion. But, I am going to order a flip windshield from 7 Jurock to replace my stock XC windshield. I called them but the measuring instructions were kind of vague. So, I am 6' 2" with a 34" inseam. From reading many threads, I am seeing that a 14" - 16" would work. I do not care if I see through it or over it, I just want to hear my radio with my full face helmet on and I cannot unless I shrink down slightly. Those of you that are around my build, please let me know if the wind is directed over you enough to somewhat control the annoying buffeting. I realize some is coming from not having lowers, but again, if I shrink down in the seat slightly, it is mostly gone....at least tolerable and the radio is enjoyable again.

Thanks in advance.

2011 Victory Cross Country Cory Ness #203 (LLoydz custom grind cams, Ness Thunder True Dual Exhaust, Power Commander 5, Power Commander Auto Tune, HMD Lowering Kit)

2010 Victory Jackpot

2007 Victory Jackpot
Woody31971 is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Victory Forums - Victory Motorcycle Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools Search this Thread
Show Printable Version Show Printable Version
Email this Page Email this Page
Search this Thread:

Advanced Search
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome