Thanks g9volt, I did shake the rear rotor and nothing until I torqued it towards the rear of the bike and heard a clunk, this is with the rear wheel on the ground, will get it on a lift and see how loose it really is then get the torque specs and tighten it up!
But that wasn’t the noise I described, it was coming from the drive belt hitting the front cover, there is wear on the right top side of the belt, looks like it is hitting the cut out or boss where the top bolt on the cover is. When riding season is over I’ll take the front cover off to confirm it and probably install a open cover from Witch Doctor.
Thanks for the info mentioned in post #2 from Kingpin50. Thanks for the heads up info!
On another note: What’s with the squeak sound when I let the clutch out, not first gear, but most of the other shifts. What is in need of grease??? Or is this normal and I'm still used to riding an HD?
2009 Cory Ness Jackpot
Dynojet PCV by Fuel Moto
S&S Performance Intake
RPW Slash pipes
Corbin seat with 2 removable backrests
Kewl Metal 45 degree rake kit
Kewl Metal LED Bullet signal lights
Cycle Sounds 200 watt amp & speakers