Help. 99 V92C fuel pressure regulator is missing the hose. - Victory Forums - Victory Motorcycle Forum
 
LinkBack Thread Tools Search this Thread Display Modes
post #1 of 5 (permalink) Old 07-16-2011, 09:18 AM Thread Starter
Junior Member
 
Join Date: Aug 2010
Location: north shore, Mass.
Posts: 23
Help. 99 V92C fuel pressure regulator is missing the hose.

I have a 99 V92C that I Got and was not running. I got it running but it will not idle and it has black smoke that come out of it. I put new plugs, Wires, Fuel Filter And pump, K&N Air filter. I noticed there is no hose on the connection on top of the fuel pressure regulator. Could that be why? If so what does it go to? Please help???
jdstang is offline  
Sponsored Links
Advertisement
 
post #2 of 5 (permalink) Old 07-17-2011, 06:20 AM
Senior Member
 
Vicbuilder's Avatar
 
Join Date: Jun 2011
Location: Central Iowa
Posts: 401
There is no hose on that regulator -so that is not your problem.
You should start by cleaning the throttle bodies and checking for air leaks. Also check the oil temp sensor on the rear jug. Make sure the two-wire harness end is clean and tight as well as the sensor plug. Clean and retighten battery terminals and check the main ground.
If you still have problems report back with fuel pressure, compression, charging voltage

Rylan Vos
The Vic Shop, Inc
(515)-339-4313
Vicbuilder is offline  
post #3 of 5 (permalink) Old 07-17-2011, 07:50 AM Thread Starter
Junior Member
 
Join Date: Aug 2010
Location: north shore, Mass.
Posts: 23
Thank. I will try that and let you know.
jdstang is offline  
post #4 of 5 (permalink) Old 07-18-2011, 07:00 PM Thread Starter
Junior Member
 
Join Date: Aug 2010
Location: north shore, Mass.
Posts: 23
I cleand the ground on the frame and checked the oil temp sensor connection. It cooks clean and got a continuity through the wires. I have not had a chance to take it for a ride again.
jdstang is offline  
post #5 of 5 (permalink) Old 07-26-2011, 07:53 PM Thread Starter
Junior Member
 
Join Date: Aug 2010
Location: north shore, Mass.
Posts: 23
Quote:
Originally Posted by jdstang View Post
I cleand the ground on the frame and checked the oil temp sensor connection. It cooks clean and got a continuity through the wires. I have not had a chance to take it for a ride again.
it's running again repaced the oil temp sensor and the air temp sensor. Took it for a ride for about 25 miles and it stays running.

Now I need to find a exaust or some slipon mufflers. Anyone know what will work on a 99???????????
jdstang is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Victory Forums - Victory Motorcycle Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools Search this Thread
Show Printable Version Show Printable Version
Email this Page Email this Page
Search this Thread:

Advanced Search
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome