V92C Deluxe fender tips. Good news - Victory Forums - Victory Motorcycle Forum
Reply
 
LinkBack Thread Tools Search this Thread Display Modes
post #1 of 12 (permalink) Old 08-03-2010, 10:06 PM Thread Starter
Junior Member
 
Join Date: Jul 2010
Location: Bethlehem, PA
Posts: 18
V92C Deluxe fender tips. Good news

The V92C fenders have pretty much the same shape as the Harley Fat Boy on the front fenders and I am told they were patterned after them. I ordered the smooth chrome Harley Fat Boy tips off Ebay and they fit, but you have to take your time and don't rush it. The front tips fit perfectly. The rear fender tips are 7 inches wide and fit inside the pin stripes and do not fill the whole fender, but they look good anyway. I had to use "C" clamps to get them to follow the curve of the fender. I ruined the first one because the clamps put a dent on each side of the chrome. Use something like a small piece of plywood to spread out the contact area of the "C" clamp with the chrome, and use a piece of terry cloth to prevent scratching same. Center it and clamp it where you want it and then drill your holes. I wanted to post pix, but my camera has dead batteries at the moment. I will try to post pix tomorrow.
BWGaugler is offline  
Sponsored Links
Advertisement
 
post #2 of 12 (permalink) Old 08-04-2010, 03:36 PM Thread Starter
Junior Member
 
Join Date: Jul 2010
Location: Bethlehem, PA
Posts: 18
Here are the pictures.

Here are the pictures I promised in the above post. Enjoy.

http://s848.photobucket.com/albums/ab48/spookytruck/
Attached Images
File Type: jpg Fender_top_1.jpg (89.8 KB, 15 views)
BWGaugler is offline  
post #3 of 12 (permalink) Old 08-04-2010, 06:48 PM
Senior Member
 
OldGringo's Avatar
 
Join Date: Jun 2010
Location: Republic of Tejas
Posts: 131
KEWL! Lookin good Hoss!

Ride hard,
Gringo
Thin Blue Line LEMC
01 V92C
09 Vision
OldGringo is offline  
post #4 of 12 (permalink) Old 08-06-2010, 08:42 AM
Member
 
gobeaves's Avatar
 
Join Date: May 2010
Location: Oregon
Posts: 32
fender tip

what kind of fender rail is that? I like the combo , oh and where did you find the fender running light? I have been wanting to do something like that to mine and was thinking of starting fab work this winter, this would save me alot of time. LOOKS GREAT by the way
gobeaves is offline  
post #5 of 12 (permalink) Old 08-06-2010, 12:37 PM Thread Starter
Junior Member
 
Join Date: Jul 2010
Location: Bethlehem, PA
Posts: 18
Fender rails and light.

The fender bumpers were a Victory option. I found mine on Ebay for an unbelievable price. The fender light is a Harley 1950's repop that I also found on Ebay. Just go to Ebay and search Harley fender light. They are out there. Good luck
BWGaugler is offline  
post #6 of 12 (permalink) Old 08-07-2010, 05:34 PM
Member
 
hwldknights's Avatar
 
Join Date: May 2010
Location: Indiana,USA
Posts: 39
Looks good and thanks.
hwldknights is offline  
post #7 of 12 (permalink) Old 08-07-2010, 06:40 PM
Member
 
hwldknights's Avatar
 
Join Date: May 2010
Location: Indiana,USA
Posts: 39
did you put one on the back?
hwldknights is offline  
post #8 of 12 (permalink) Old 08-07-2010, 07:31 PM Thread Starter
Junior Member
 
Join Date: Jul 2010
Location: Bethlehem, PA
Posts: 18
Yes sir I did. Click on the hyperlink just above the above picture and it will take you to my photobucket page. There are several pictures of my bike there and one of them is a rear fender picture. I used a "C" clamp the first time to hold it in place while drilling the holes and dented the first one on each side. If you use a "C" clamp, use something to spread out the clamping surface area so it isn't all concentrated in one spot, and use a piece of terry cloth, or microfiber to prevent scratching.

Good Luck,
Barry
BWGaugler is offline  
post #9 of 12 (permalink) Old 08-07-2010, 09:51 PM
Member
 
hwldknights's Avatar
 
Join Date: May 2010
Location: Indiana,USA
Posts: 39
s

Seen your pics and front and back look good.Thanks
hwldknights is offline  
post #10 of 12 (permalink) Old 11-14-2010, 10:38 AM
Junior Member
 
Mick's Avatar
 
Join Date: Nov 2010
Location: Hermantown MN
Posts: 8
Garage
Rear chrome fender tip

Thanks for the info on the front fender tip. Knowing that I can use the tip from a Fatboy helps.
I recently bought a lot of Vic pats on Ebay. I don't think the guy knew what he had. Hell, I don't even know what some of it is, but there were two rear fender tips (new) in the lot.
I am keeping one for my 2001 V92, but if anyone would like to buy the other, it is available. I'm thinking $50 + cost of shipping.
Mick is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Victory Forums - Victory Motorcycle Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools Search this Thread
Show Printable Version Show Printable Version
Email this Page Email this Page
Search this Thread:

Advanced Search
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome