Hi have a 2007 Vic Hammer idle problems anyone can help with problem

????????? It would help to explain the problem.

shot in the dark. clean your throttle bodies.

shot in the dark. clean your throttle bodies. so do you think using fuel cleaner would WORK !!

so do you think using fuel cleaner would WORK !!

thats what i use. get a small foam paint brush and have it.

I personally use carb cleaner. Stick an old rag into the throttle bodies before starting. Spray the throttle bodies then clean with a towel, q-tips, cotton tip cleaners, small foam paint brush etc..

Be sure to twist the throttle so you clean both sides!

Before you dig into all that, I would suggest checking the idle cable adjustment.

I had a similar problem on my 06. First check the throttle bodies, that wasnt the problem on mine though. It just needed a idle adjustment. If you take of the "cheese wedge" on the left side, or the key side....and you look deep back there, there will be a brass looking screw. Take your time and adjust that as necessary. I like to have mine around 1K. With the fast idle up at around 2K. Hope this helps.

Josh

Dude...thank you SO MUCH for posting this, I was afraid I was gonna have to remap my engine for a lousy 200 rpm's!!! Bike idles like a champ now.