Victory Motorcycle Forum banner

New Seat and Custom Luggage rack

5K views 11 replies 9 participants last post by  CycleOpsUSA 
#1 ·
G'day all, Just posting some pictures of my jackpot with new seat and luggage rack that was custom made by Will at cycleopsusa. I contacted Will via email (Im in Australia) and told him what i was after. After a couple of weeks of email tennis everything was in the pipeline and this is the result. Im really pleased with the way it turned out.

Will is a gentleman and goes to great lengths to make sure you get what you want. His products are excellent in quality and I recommend him to anyone who has thought about getting a part for their bike which is just right.

Thanks Again Will.
 

Attachments

See less See more
4
#6 ·
Wow!!!! Your bike is over the top! Beautiful! Rack is a perfect addition!
 
#12 ·
Thanks Bob, I saw the bat signal come on in the sky so I came in to answer him. There are two standoffs at the front corners and one short spacer at the rear where it is bolted into the threaded bungs already in the factory fenders. And by mudguard I'm assuming you mean the fender. Those bosses are actually in the fender itself which are reinforced and the fender is bolted to the frame. as for the backrest, I make special receivers for the front standoffs that accommodate it so that it is removable. You slide it in and it locks in place by tension and then you break it free and release it and slide it out if you don't want it on. if you go to my website you'll see many more photos and all the hardware giving you a much better idea of what I'm talking about. if you have any further questions or want to order a set up just contact me and I'll be happy to get you squared away.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top