Victory Motorcycle Forum banner

Ruined beyond fixing/polishing?

3K views 13 replies 10 participants last post by  CrossRoadsClassicLE 
#1 ·
So here is two pics of my lower forks which are from a 2005 Vegas. It looks like the previous owner had taken sand paper or a green scrub pad to the forks to scrub what looks like some pitting.

My question is: can this be polished out with any special type of polish and/or tools or is it too far gone? If it is too far gone, does anybody out there make chrome covers for the lower part of the forks?

Same goes for my front wheels, looks like it has some pitting along the leading edges, can it be polished/buffed out or are they done.
 

Attachments

See less See more
3
#3 ·
Looks the clear coat on the forks got messed up. On. My previous scoot I removed the front wheel, applied some not alot of stripper, and what that didn't take off I followed by sanding with 1500 I think, or finer either way I ended up very fine sandpaper. From whenever I wash her I would take a rag with aluminum polish and wiped it down. Always stayed shiny for me.

Sent from my SPH-L710 using Motorcycle.com Free App
 
#4 ·
I wonder what made the aluminum finish pit like that? Salt? Dunno? Pictures are also hard to determine how bad or good some things are, so don't take it as gospel.
How handy are you with sandpaper and a polishing wheel? Beyond help? Hard to say since some are more adventurous than others and have good results. I can't blame anyone who won't or is timid about doing it.
If you plan to replace them anyway, what do you have to lose. Just keep in mind it is always better to STOP short on those kinds of projects than force it trying to get perfection. The results are usually less than optimum when this happens.
Good Luck.
 
#5 ·
It can be fixed. Just need to use the right power tools or plenty of elbow grease and start with the level of wet sandpaper below what caused this then work with finer and finer sandpaper until you get to where a polishing wheel and some polishing rouge of the right grit will get it to that level of shine you are looking for. You might need 2 or 3 types of rouge just like you would need finer and finer type of wet and dry sandpaper.

Might need to start with something to remove the plastic coating to do the best possible job.

Definitely fixable though..
 
#7 ·
Or take the parts in to be powdercoated and go with the blacked out look.
 
#8 ·
the whole set of 4 directional mags on my pickup were like that when i bought them for 60.00 for the set. i used paint remover to get off the remaining clear coat, then sand paper starting coarse ,going down to a 400 wet. then steel wool,[ painters type, not kitchen pads, something like 000 grade], then polish with car polish. they looked great but i haven't kept them polished and after about a year they are dull but still not pitted.
 
#9 ·
Thanks for all the replies, i dont mind putting in the elbow grease if you have the right tools to get the job done. Like one poster said, im concerned that i put in the work and get less then desirable results. The other part is that i have no experience wet sanding, especially dealing with metals. I have done the basic wax polishing/rim polishing on my cars but nothing beyond that. I guess i would be more inclined to pay a professional to do it and do it right the first time.

My plan for the rims was to buy an identical set used on ebay or something thats in great condition and have them either chromed or powdercoated instead pulling mine off, sending them to the shop and waiting for them to come back...i dont wana wait that long to ride my bike.
 
#13 ·
Thanks for all the replies, i don't mind putting in the elbow grease if you have the right tools to get the job done. Like one poster said, I'm concerned that i put in the work and get less then desirable results. The other part is that i have no experience wet sanding, especially dealing with metals. I have done the basic wax polishing/rim polishing on my cars but nothing beyond that. I guess i would be more inclined to pay a professional to do it and do it right the first time.

My plan for the rims was to buy an identical set used on ebay or something thats in great condition and have them either chromed or powdercoated instead pulling mine off, sending them to the shop and waiting for them to come back...i don't wanna wait that long to ride my bike.
Out where you live why not ride to some chrome shops an ask them how long it would take to do you stuff.
If you and a friend pull it a part I can't believe you would be down for more then two weeks.
Just make sure you order all parts and have in hand before tearing a part. You can get better wheel seals and bearing from a bearing store at a cheaper price then a dealer .
 
#10 · (Edited)
Sounds like you have what it takes. All you need is motivation and confidence. IMHO, and we are still dealing with pictures, would be to start with 400 or 600 grit paper. Working down to 1500-2000 grit. Don't concentrate on a single spot, keep moving around so as not to create deep spots.Wet sanding isn't the red eyed long clawed snaggle toothed monster some seem to think, it is water and sand paper, it helps slow the process and gives a better chance to "see" things while helping keep dust and sanded off particles from coming into the mix.
Polishing wheel, ball (I thing Mothers makes one fairly inexpensive) isn't scary either, you may need help on the polish but some folks here or any good auto paint shop are usually willing to help on that one. A place that sells custom truck accessories might also be of help.
Rule of thumb, Take Your Time. If you are in a big hurry, then taking it and having it done might be best, these things do seem to take some patience.
How ever you go with it, good luck.
 
#11 ·
My 04 has some pitting and some of the cheap (Polaris) chrome popping.But I would rather ride it than polish and polish on it.
The recommendation post will work but take a lot of time and work.
If you bought your bike to look at and admire do the or work.But I would rather just ride cheers this is my opinion and comes from a guy with a wall full of bike show winnings from when my HD was new to me.Still turns heads but isnt detailed.
 
#12 ·
i'm pretty nit picky about such stuff, i would fix it, but i'm also cheap, i would never pay anyone to do what i can do myself, regardless of the labor.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top