Windscreen for my V92C Classic Cruiser...

[lawnstriper]

Sorry , don't know . Guess these older , not made any more bikes , aren't a priority for aftermarket companies anymore


Sent from my iPhone using Motorcycle.com Free App
Candy apple red 2001 V92C
National cycle windshield
Victory Saddlebags w/locking quick detach mounts
Victory T-Bag on the sissy bar
Not sure what else has been done , just got it 11/20/12

[bo2beaux]

Have you tried 7JuRock? I just got a new windshield for my '05. You will need to get hardware if you don't have any though. They just sell the windshield only.

http://www.7jurock.com/store/index.p...wCat&catId=270

[Tims_04V92TC]

Try giving Pinwall Cycle parts a call. 330 879 9910
I know they parted out two TC's in the last few months and had Shields, your mounting brackets and the two side brackets that mount to the forks. May be able to pick up th lightbar too. Just got through scouring Ebay and couldnt find the ones I had seen so it's a coin toss. They may be able to point you in the right direction.

[David Haynes]

Originally Posted by Dann

You'll need to blow it up to get a close up.

Hey Dann,

Do you remember which mounting hardware you used with the "Speed Demon" on your V92C? They have one called "QuickChange Sportshield" hardware and another called "Sportshield Trigger" kit. Some websites I've looked at say the QuickChange is right for the Vic and others say to get the Trigger kit.

Also, I saw in your profile that yours is a 1999 model and the photos there look like the windshield mounts to the fork tubes between the triples. I'm not sure what, if any, changes were made to the forks between your '99 model and my '03, but I measured my fork tubes and they're 45mm in diameter. Do you happen to know that size yours are?

Thanks again!
David

[Atbyrne]

Do you happen to have any of the part numbers off the shield or off of the mounts? Can you get any pictures of the mounts on this?

Originally Posted by lawnstriper

Don't know if they are same but I have a national cycle on mine and it is not in the way of speedo . Here is a pic
Attachment 8961


Sent from my iPhone using Motorcycle.com Free App
Candy apple red 2001 V92C
National cycle windshield
Victory Saddlebags w/locking quick detach mounts
Victory T-Bag on the sissy bar
Not sure what else has been done , just got it 11/20/12

[lawnstriper]

Sorry , don't know the model # but here are a few more pics of how the brackets are mounted . I bought the bike with this on it . I will ask him if he knows any more on it.ImageUploadedByMO Free1354293854.984240.jpgImageUploadedByMO Free1354293865.574770.jpgImageUploadedByMO Free1354293881.544005.jpg


Sent from my iPhone using Motorcycle.com Free App

[jeremylittle]

Hey bo! Ive looked at those shields from 7jurock and was going to buy one, but not sure what mounting hardware to get. Can mounting hardware from Memphis or National work on these shields? Or do I need to find Victory mounting hardware somewhere?


Sent from my iPhone using Motorcycle.com Free App

[MarvinM]

Originally Posted by jeremylittle

Hey bo! Ive looked at those shields from 7jurock and was going to buy one, but not sure what mounting hardware to get. Can mounting hardware from Memphis or National work on these shields? Or do I need to find Victory mounting hardware somewhere?


Sent from my iPhone using Motorcycle.com Free App

Most likely you will need to track down the original Victory hardware for a V92TC. I also ordered a shortened version from 7jurock. All you get is the acrylic shield. You have to remove all the hardware on the shield and install on the new shield. The holes are drilled to match.

The OEM windshield was way too tall for me and I am 6' tall. The OEM shield is designed for someone 6'3" or taller. I prefer to see just over the windshield not through it. Windshields do fog up on cold mornings. No windshield wipers to turn on like on a car.

[David Haynes]

Memphis Shades "Speed Demon" sportshield, installed in 10 minutes today. I like it, especially at speed on the slab.



Thanks to everyone who replied for all your help!

[Dann]

Hey that looks familiar,where you in my garage last night! it looks
on the ole girl. Sorry i didn't reply to your last post i could of giving
you the part number for the mounting kit.