Location for stabel horn

[rainman123]

Looking for suggestions on where to locate a stebal horn on a 2011 8 ball

[joarzero]

I did install mine in the Kingpin, I have pictures somewhere, let me look for them... I was going to post it anyway, regards!!

[CrossRoads]

Originally Posted by rainman123

Looking for suggestions on where to locate a stebal horn on a 2011 8 ball

Is it someone else's bike? Your signature says 2012 XR... Just wondering.

[joarzero]

Also in order to do the same install that I did you need to have Lloydz Torque Tubes, but maybe you can get the idea and find your own way!!

[rainman123]

Originally Posted by CrossRoads

Is it someone else's bike? Your signature says 2012 XR... Just wondering.

Yes it's my ole lady's bike and she's picking thought bout putting where the original is but she's says it would hit the fender not gonna aurgue with her on it

[TonyChip78]

Just ordered mine for my XR. Wanted to let you know, you can separate the compressor from the horn with tubing. This may make it easier to hide.


Sent from my iPhone using Motorcycle.com App

[Dernel]

Here's where mine went...screaming banshee..

Used heavy duty cable ties, drilled hole in casing and secured as tight as i could..been on for 6 or so months..works great

2011 Hammer 8 ball install

Derek

[rainman123]

Thanks for the info had not thought bout pitting it under the engine

[visionjohnny]

what did you do here or add

[Dernel]

Nothing, on the Aus bikes that bracket is original, and not part of the installation for the horn.

I think it is a cover for the neutral switch or sidestand switch.

with respect to the horn installation, have also attached wiring for the banshee system. One thing i found as i retained the stock horn, was that i needed to fit a relay off the existing horn to drive the banshee horn which was supplied direct from the battery..

hope this helps..

Derek