Victory Motorcycle Forum banner

Location for stabel horn

2K views 9 replies 6 participants last post by  Dernel 
#1 ·
Looking for suggestions on where to locate a stebal horn on a 2011 8 ball
 
#3 ·
Is it someone else's bike? Your signature says 2012 XR... Just wondering.
 
#5 ·
Yes it's my ole lady's bike and she's picking thought bout putting where the original is but she's says it would hit the fender not gonna aurgue with her on it:D
 
#7 ·
Here's where mine went...screaming banshee..

Used heavy duty cable ties, drilled hole in casing and secured as tight as i could..been on for 6 or so months..works great

2011 Hammer 8 ball install

Derek cheers
 

Attachments

#10 ·
Nothing, on the Aus bikes that bracket is original, and not part of the installation for the horn.

I think it is a cover for the neutral switch or sidestand switch.

with respect to the horn installation, have also attached wiring for the banshee system. One thing i found as i retained the stock horn, was that i needed to fit a relay off the existing horn to drive the banshee horn which was supplied direct from the battery..

hope this helps..

Derek cheers
 

Attachments

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top