Hi All, tried to search for this answer, but did not find anything Vision specific... I am trying to solve for my passenger, who is a pretty tall girl 5'10", is sitting to high up and getting a lot of wind. We got on a Goldwing and she liked that setup much better, but I do not want a car on too wheel
In searching I came across a post suggesting two things: shave seat foam; install rear lowering kit. Can someone share experience with lowering a Vision? Also, any other ideas beside these two?
Welcome to the forums!
Lowering is not going to resolve your issue. The vision does ride higher for the pinion but before I shaved the seat I would look at a 7jurock or Klockwerks flip windscreen. With the vision having the electric windscreen you could go up to a 19" flip but only push it all the way up when she is on the back. Otherwise you could roll it down and keep it just under where your stock rides. The flip,does have a little distortion on the road when you look directly through it but I think you could adjust height to not have it in direct line of sight. There are other posts on the flip shields by vision riders but here is the one I wrote up.
If you have more questions post them and will. Try to answer.
2011 White Vision - Nuvi 550, Lowers, Lloydz 2nd filter, Vic perf filter, CB/Icom, 96 Brake LED's, Clear Signal lens/Switchbacks, VIC Hwy Pegs, Stebel Horn, 7Jurock 15" Shield, PCV, Lloyd ATS and Variable intake, Ness honkers
2004 V92 TC - S1 flash, level 1 slip-on, Ness big sucker K&N, ISO Grips, 4x1.5 Highway Hawg Risers, extra chrome (never too much), JM 2k CB 4' antena, Mustang seat, HD Front TS & Lowers, OD Pulley
Retired Navy SCPO