XC Dyno My Garage Slip ons
Rode the XC to Daytona from MD and figured that I would have the bike put on the rollers. I tuned the bike with Autotune and Kyle (KMC) clear up some of my upper rpm part throttle cells.
Exhaust: Been reading on here about different big name slip ons and thrush mods. Figured I would build my own. Had the stock pipes de-cored and added 2 1/4 tale pipe slashed cut like stock, when I bought the bike new. No bottom end but love the tone of the bike, did a timing wheel and big help. Then I did the DR cams, XF PCV and Autotune. much better but still soft below 3000.
My exhaust method: I bought two 2 1/8" x 48" exhaust sections from Pep Boys for 12 buck each. Took off the stock pipes and slide the 2 1/8 pipes with a bit of work. Slash cut the slip in pipe to match the tails and used an exhaust pipe expander to lock in the slip in and the tails. The result is exhaust velocity is back up and it is loud.
Recap: My exhaust, DR cam, Timing wheel +4, XF, PCV, Auto Tune and some help from Kyle.
Numbers surprised us both.
Will follow up with exhaust picks when I return to MD.
Victory aftermarket paint Blue w/ flames
Stage 1 kit with download
07 Hammer S
Stage III Cams
Custom Intake (I made)
Garage built exhaust
14 XC Boss Blue
116 hp 117 tq
VM 1 Cams
Made my own exhaust
Pod 300 datalogger