Passenger highway pegs - Victory Forums - Victory Motorcycle Forum
 1Likes
Reply
 
LinkBack Thread Tools Search this Thread Display Modes
post #1 of 11 (permalink) Old 08-21-2015, 11:46 AM Thread Starter
Member
 
Join Date: Sep 2014
Location: Central IL
Posts: 42
Default Passenger highway pegs

On our recent trip, I ran into a fellow rider (HD) and we started talking bikes. Good conversation and really friendly couple. Our wives were talking comfort, and she showed us her adjustable highway pegs. They fold out of the way towards the rear when not in use, and are adjustable to three positions when in use.
Of course the pegs had the logo pasted all over them but when I asked, the guy said he thought Kuryakyn sold them too. I looked and am either stupid or blind but couldn't find them. And do they make them to fit our bikes (2014 CCT)? Anyone that can help would be appreciated by me (and my wife - if she's more comfy, we get more ride time together).

Thanks!


2014 CCT
Stock for now
Central Illinois

2014 Cross Country Tour
Sonic Blue and Silver
Kuryakan Trunk Rack
Big D Customs trailer hitch
off the shelf driving lights
Angelslove is offline  
Sponsored Links
Advertisement
 
post #2 of 11 (permalink) Old 08-21-2015, 12:18 PM
Senior Member
 
HowardGNelson's Avatar
 
Join Date: Aug 2013
Location: Sumrall, MS
Posts: 426
Garage
Default

pretty sure its the ones for the Goldwing that fit the XCT, you just have to widen out the holes a c-hair

2012 XCT Sunset Red - D&D's, Lloydz filter, ATS +4, Clearwater Krista's, Fusion LED kit, Rusty Jones single din, Sony head unit, PCV, BAB Tank Lift, BAB 1/4 Turn, Kenwood 400x4 amp, Soundstream 1000x4 amp, Focal 6.5s, DS18 tweeters, Polk Audio DSi5.25s, Rick Fairless mini apes
RIP my 2010 Victory XC-Skull bike (Totaled 10/21/16)
07 Jackpot Premium - white w/ flames(SOLD)

**Stop saying "how dumb can you be", people seem to be taking it as a challenge**
HowardGNelson is offline  
post #3 of 11 (permalink) Old 04-05-2016, 07:30 PM Thread Starter
Member
 
Join Date: Sep 2014
Location: Central IL
Posts: 42
Default

After some research, you are right. (I know - it's been a while)
We are heading up to Anamosa IA to the outlet store - hoping to get Kuryakyn #7016 pegs for the Mrs. and the Tour Tech for me :-)

Also looking for a drink holder for the trunk. I know I've seen one somewhere.....I'll keep looking.

Ride safe - spring is almost here, more snow for us this week.....WILL IT EVER END!!!!

2014 Cross Country Tour
Sonic Blue and Silver
Kuryakan Trunk Rack
Big D Customs trailer hitch
off the shelf driving lights
Angelslove is offline  
Sponsored Links
Advertisement
 
post #4 of 11 (permalink) Old 04-05-2016, 09:09 PM
Lifetime Premium
 
Motorbikerx's Avatar
 
Join Date: Dec 2013
Location: Gold Coast, Australia.
Posts: 8,651
Garage
Default

mmmm well the other day on the highway there was a lady in a V8 ute play racing me when she ran out of fuel, being a gentleman I stopped to assist.
In no time at all she was on the back of my bike, (dressed quite inapropriately too, I might add)
shortly shes got her legs wrapped around my waist, and leaning back on the sissy bar with her bare feet crossed in front of me!
Such is the stability of these fine Victory bikes that I have no trouble riding with just my throttle hand, leaving my left hand free
naturally I took her for the scenic route before picking up a can with fuel to get her on her way.
All up a very interesting experience.
Victory-We Ride

Victory Vegas 2010
Lloydz 109"cube big bore
" " 495 cams
" " TorqueTubes
" " timing wheel @4 deg.
" " Primary plate
" " IAV
RPW Slash pipes
PCV
Progressive 465 rear shock
Kingpin USD Forks
18" XC front wheel
1 3/4" 'Burleigh Bars'
Stebel air horn
12.106 @110.90mph
114/123

Victory Cross Country 2010 (106)
Lloyds air filter
" " VM1 Cams
Home gutted exhaust
Maximus
Both tuned by [email protected] Dyno
110/116

Gold Coast
Australia
Motorbikerx is offline  
post #5 of 11 (permalink) Old 04-06-2016, 05:50 AM
Lifetime Premium
 
dentdave's Avatar
 
Join Date: Jan 2012
Location: south fl
Posts: 397
Default

Scroll down to post # 4 to see what I did, my wife loves them.

https://www.victoryforums.com/34-vict...fset-pegs.html
rustychevelle likes this.

David
www.dentdave.com
2012 Cross Country Tour
IBA # 33520 - 1040 in 24, 04 / 2008
1036 in 24, 10 / 2014
Michelin Primacy Alpin PA3 ZP 195/55/16
dentdave is offline  
post #6 of 11 (permalink) Old 04-06-2016, 06:01 AM
Senior Member
 
PaiN's Avatar
 
Join Date: May 2014
Location: CT, USA
Posts: 4,046
Garage
Default

I run a set of Kuryakyn SwingWing boards on the back....My wife loves the ability to have the "highway pegs" when she wants to stretch out.
Kuryakyn Swingwing Footpegs | ZZ53757 | J&P Cycles

PaiN's Rides on YouTube

"Living life is a great idea, but riding a motorcycle actually gives you a tool to do it..." -me
2013 Sunset Red Cross Country
Vic Tri-Oval Mufflers, Lloydz VM1-DR cams, AF, PC-V @112hp/113tq
Corbin Dual Tour seat, Klock Werks Klip Hanger bars, Vicwapz
Avon Contour grips, Kuryakyn Kinetic boards and rear SwingWings
Victory black LED headlight and Touring Pack, Madstad 9" windshield
PaiN is offline  
post #7 of 11 (permalink) Old 04-06-2016, 08:34 AM
Senior Member
 
wspollack's Avatar
 
Join Date: Dec 2011
Location: Niskayuna, NY
Posts: 2,069
Default

Quote:
Originally Posted by Angelslove View Post
...
Also looking for a drink holder for the trunk. I know I've seen one somewhere.....I'll keep looking.
...
I'm not sure if this is the sort of thing you're looking for, but just in case, a few details on the mod I made a few years ago:

- I added a RAM diamond base and ball ( RAM 2.43" x 1.31" Diamond Ball Base with 1" Ball - RAM-B-238 | RAM Mounts ) to the side of the trunk. This is rock-solid, e.g., you can move the whole bike by grabbing onto the ball. I drilled two holes in the metal trunk support, through the black plastic on the side. (I also had to cut away some of the internal plastic speaker surround, so I could get a socket on the nuts on the end of the bolts I used. I also added some black gasket maker around the base, because the plastic is curved in that area, so the base isn't completely flush with it.

- To the RAM ball, when traveling two-up with my wife, I added the self-leveling RAM cupholder ( RAM Handlebar Rail Mount with Zinc Coated U-Bolt Base, Self-Leveling Cup Holder & Koozie Unpackaged - RAM-B-132RU | RAM Mounts ) and a six-inch extension arm. The cupholder is same one sold by Vic. This location provides easy access, and does not interfere with opening the saddlebag or getting on or off the bike.

The permanent RAM ball and base -- in place when the cupholder is not in use -- or drilling through plastic is not to everyone's liking, of course. Personal preference, taste, etc. A non-permanent solution is to use one of the sizes of the RAM Tough Claw (e.g., RAM Small Tough-Claw? with 1" Diameter Rubber Ball Unpackaged - RAP-B-400U | RAM Mounts ), if you have saddlebag guards; the downside of that is that the cupholder will be low down, harder for the passenger to reach.

Some pics from my gallery:
Attached Images
File Type: jpg 2013-10-02-17-28-08.jpg (35.5 KB, 8 views)
File Type: jpg 2013-10-03-09-00-53.jpg (23.3 KB, 7 views)
File Type: jpg 2013-10-03-08-59-12.jpg (25.2 KB, 6 views)
File Type: jpg 2013-10-03-08-59-58.jpg (21.8 KB, 7 views)

Cheers,

Bill P.

2012 XCT (SOLD) : HeliBars; Centramatics; PC-V; Lloydz air filter; 11" Madstad; Rivco LED mirrors; Doran TPMS; Stebel horn; Motolights; CustomLED trunk flasher; KewlHeel shifter; CycleOps trunk rack; BeadRider seat; Vibranator bar ends; Passenger grab handles; Powerlet outlets; Handlebar RAM mount; RicZ laydown plate; Brukus SaddlebagSecure; 14" flexible antenna; RAM cupholder on trunk; shock Schrader valve relocation.

Gallery: http://www.billanddot.com/victory-xct/
wspollack is offline  
post #8 of 11 (permalink) Old 05-03-2016, 07:26 PM Thread Starter
Member
 
Join Date: Sep 2014
Location: Central IL
Posts: 42
Default

Well it is done. I'll start with the right side drink holder. EASY!! If there's any questions, watch Witch Doctor's video. ImageUploadedByMO Free1462321586.626917.jpgImageUploadedByMO Free1462321602.098707.jpg


Sent from Motorcycle.com Free App

2014 Cross Country Tour
Sonic Blue and Silver
Kuryakan Trunk Rack
Big D Customs trailer hitch
off the shelf driving lights
Angelslove is offline  
post #9 of 11 (permalink) Old 05-03-2016, 07:33 PM Thread Starter
Member
 
Join Date: Sep 2014
Location: Central IL
Posts: 42
Default

Next was Mrs. Angelslove's highway pegs. Install was a little tricky. Used increasing sized drill bits and then round files to "widen" the holes, which actually needed to be closer together.
ImageUploadedByMO Free1462321751.688221.jpg
A little adjusting to get them exactly to her liking and she likes them. It's nice for her to have options when we are on the long runs.
ImageUploadedByMO Free1462321852.815775.jpgImageUploadedByMO Free1462321868.979018.jpg
They can be in the way a little when moving the bike while sitting on it but I found no interference while normal riding. Even at stop lights, unless she forgets to put them up!!
A little pricey but we are both happy with the purchase.


Sent from Motorcycle.com Free App
Attached Images
File Type: jpg ImageUploadedByMO Free1462321831.561165.jpg (13.4 KB, 7 views)

2014 Cross Country Tour
Sonic Blue and Silver
Kuryakan Trunk Rack
Big D Customs trailer hitch
off the shelf driving lights
Angelslove is offline  
post #10 of 11 (permalink) Old 05-03-2016, 07:43 PM Thread Starter
Member
 
Join Date: Sep 2014
Location: Central IL
Posts: 42
Default

Finally, when we bought this machine, I really didn't think I would need highway pegs for me. But, for my birthday I was granted funds to spend on the bike, so I said why not? The folks at J&P were kind enough to let me take a few different styles out of the box and see how they would bolt up. The longhorn offsets worked the best FOR ME. Before I tried them, I was sold on the Tour Techs.
ImageUploadedByMO Free1462322279.065174.jpg
Mounting was very straight forward. However, I had the small driving lights to relocate. We did over 300 miles on Monday and I loved every mile more than I have before. They gave me even more options along with those mile long floor boards.
ImageUploadedByMO Free1462322586.822499.jpg
ImageUploadedByMO Free1462322601.994262.jpg


Sent from Motorcycle.com Free App

2014 Cross Country Tour
Sonic Blue and Silver
Kuryakan Trunk Rack
Big D Customs trailer hitch
off the shelf driving lights
Angelslove is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Victory Forums - Victory Motorcycle Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools Search this Thread
Show Printable Version Show Printable Version
Email this Page Email this Page
Search this Thread:

Advanced Search
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome