Passenger Floorboard Extenders - Victory Forums - Victory Motorcycle Forum
 
LinkBack Thread Tools Search this Thread Display Modes
post #1 of 7 (permalink) Old 01-26-2013, 01:56 AM Thread Starter
Senior Member
 
sand man's Avatar
 
Join Date: Dec 2012
Location: Abilene, Tex.
Posts: 167
Garage
Default Passenger Floorboard Extenders

I don't know what they are called but I have several friends who's passenger floorboards have adjustable passenger pegs that attach to the passenger floorboard and allows the passenger to straighten their legs out or move their feet to another position. In Kuryakyn it is part #4570 Adjustable Passenger Pegs but for Harley fitment. Has anyone seen this for Victory? Thanks

2011-12-13 Pres. Abilene Roadriders
His: 2015 Victory Cross Country Tour
Well Equiped
Hers: 2015 Gunner
Nicely Equiped
sand man is offline  
Sponsored Links
Advertisement
 
post #2 of 7 (permalink) Old 01-27-2013, 09:37 PM Thread Starter
Senior Member
 
sand man's Avatar
 
Join Date: Dec 2012
Location: Abilene, Tex.
Posts: 167
Garage
Default No Replies

88 views and no replies. I guess there is not an adjustable passenger foot peg for XCT or VV. Aftermarket needs to get busy.

2011-12-13 Pres. Abilene Roadriders
His: 2015 Victory Cross Country Tour
Well Equiped
Hers: 2015 Gunner
Nicely Equiped
sand man is offline  
post #3 of 7 (permalink) Old 01-27-2013, 09:50 PM
Senior Member
 
ammo_umb's Avatar
 
Join Date: Sep 2010
Location: Utah
Posts: 2,699
Default

I'm a little confused but I here are the options:
-You can get the OEM adjustable mounts for floorboards to raise or lower them.
-You can get creative with some Kuryakyn parts for pegs. Kuryakyn parts will have to consist of adapters and offsets -(rotatable up/down/fwd/reverse 2"-4" available). I believe the adapters are the same ones use on a Kingpin and you can get them splined or unsplined but your choice of offset will determine which type to use.
-You can get the same Kuryakyn adapters and some swing wing pegs, pegs with stirrups or mini-floorboards with swing outs that will do what I think you really want to do. Unfortunately I don't think there's anything you can use with the OEM floorboards.

Retired USAF, IYAAYAS!

2008 V-Star 1100 Custom Bobber project

2011 Crimson XR with Forged Highway Bars / Hard Bags / Passenger Backrest, Ness parts including Smooth Layback Plate Frame/Mount / Rad 3 Mirror / deep cut grips / drivers floorboards /shifter peg / brake peg / passenger pegs. Witchdoctor black rack, Lloydz filter / timing wheel / VFC III, 7Jurock windshield, Drag Specialties seat.

Last edited by ammo_umb; 01-27-2013 at 10:40 PM. Reason: additional info
ammo_umb is offline  
Sponsored Links
Advertisement
 
post #4 of 7 (permalink) Old 01-27-2013, 09:51 PM
Senior Member
 
RICZ's Avatar
 
Join Date: Sep 2010
Location: Portland,Oregon
Posts: 12,125
Default

Quote:
Originally Posted by sand man View Post
88 views and no replies. I guess there is not an adjustable passenger foot peg for XCT or VV. Aftermarket needs to get busy.
You're confusing us. Do you want something for floorboards or do you want peg extenders. If the latter, I have installed Kuryakyn's parts.

2010 Midnight Cherry XR. 7Jurock, Lloydz AF, ATS, AFR tuned VFCIII, IAV, and T-6 and locally repacked pipes = big smiles. SOLD to a dear friend, so it's still in the family."
2017 Spyder F3 Limited - keeps this old guy in the wind and riding with friends.
Cure that ugly stand up license plate with the cheapest and best laydown bracket. Click this:
https://www.victoryforums.com/11-ven...t-x-bikes.html
RICZ is offline  
post #5 of 7 (permalink) Old 01-28-2013, 01:10 AM Thread Starter
Senior Member
 
sand man's Avatar
 
Join Date: Dec 2012
Location: Abilene, Tex.
Posts: 167
Garage
Default

I will try to take pictures of adjustable passenger pegs that attach to the passenger floorboards. Thanks

2011-12-13 Pres. Abilene Roadriders
His: 2015 Victory Cross Country Tour
Well Equiped
Hers: 2015 Gunner
Nicely Equiped
sand man is offline  
post #6 of 7 (permalink) Old 01-28-2013, 06:25 AM
Senior Member
 
Join Date: Oct 2009
Location: Bay Arkansas
Posts: 269
Default Passenger Floorboard Extenders

Quote:
Originally Posted by sand man View Post
I don't know what they are called but I have several friends who's passenger floorboards have adjustable passenger pegs that attach to the passenger floorboard and allows the passenger to straighten their legs out or move their feet to another position. In Kuryakyn it is part #4570 Adjustable Passenger Pegs but for Harley fitment. Has anyone seen this for Victory? Thanks
I know exactly what you're talking about. It's a foot peg that can adjust to several different positions that somehow is attached to the passengers floorboards.. It allows the passenger multiple foot positions lower or higher more forward other than just the floor boards.. I've only seen them on Harley's and I believe they are Kuryakyn parts.. I've looked and haven't seen these for the Cross Country.. It would make my wife more comfy.. They can be adjusted on the fly I believe.


Sent from Motorcycle.com Free App

Victorypotamus
Milesx is offline  
post #7 of 7 (permalink) Old 01-28-2013, 11:06 AM
Senior Member
 
wspollack's Avatar
 
Join Date: Dec 2011
Location: Niskayuna, NY
Posts: 2,069
Default

I, too, am not sure exactly what you're looking for, but IF you're interested in adjustable-position passenger mini-floorboards, I'll add this info:

1) On my Valkyrie Interstate, which I owned from 2000-2007, I added Big Bike Parts / Show Chrome adjustable-position passenger mini-floorboards. These replaced the passenger pegs, and allowed about a 3" circle of up/down, fore/aft, and angular adjustment. The rotational parts mated with a serrated edge, so the position was locked in place, once the through-bolt was tightened. Adjustment required an Allen and open-ended wrench, so you didn't want to just change them at a rest stop.

I've attached a pic. And here's the manufacturer's page: http://www.bigbikeparts.com/Inventory/Navision/21-928T . And here's a seller's page: http://www.realhog.com/detail.cfm?Ca...son_Dyna_Glide

2) At the time, I was aware that Rivco made a similar product, but couldn't afford it. Actually, Rivco's product is much slicker, because it allows, I believe, tool-less adjustment, via a spring-and-pin mechanism. You can see some of these near the top of this Rivco page: http://www.rivcoproducts.com/products/home.php?cat=272 . And here are two seller pages, with slight product variations: http://www.realhog.com/detail.cfm?Ca...dson_Sportster and http://www.realhog.com/detail.cfm?Ca...dson_Sportster .

3) Kurakyn makes a slew of adapters, pegs, and boards, for both the rider and passenger. Again, here are a couple of examples: http://www.realhog.com/detail.cfm?Ca..._Models__Pair_ and http://www.cruisercustomizing.com/ku...r/part/KY-7993 .

(Incidentally, I have no personal experience with CruiserCustomizing, but they have a lot of parts. The page I was working from is this: http://motorcycle-accessories.realho...%20Floorboards .)

Now, I have no idea whether BBP, Rivco, or Kury makes stuff directly compatible with Victory mounts, or whether you have to use assorted adapters or possibly even fabricate something. Me, one of the main reasons I bought an XCT -- seriously -- was that it came with adjustable passenger mini-boards. I've played with a few heights and angles in order to suit my wife, and I think we're just about set. Like the BBP boards I had on the Valk, though, these are semi-fixed. IMHO, if you get the Rivco to mount up, this would be nicer, as it does allow easily messing with the setting at a rest or gas stop, should your passenger want to stretch out more, etc.

If you're not looking for this sort of thing, sorry to take up everyone's time.
Attached Images
File Type: jpg Rear Floorboard.jpg (45.6 KB, 11 views)

Cheers,

Bill P.

2012 XCT (SOLD) : HeliBars; Centramatics; PC-V; Lloydz air filter; 11" Madstad; Rivco LED mirrors; Doran TPMS; Stebel horn; Motolights; CustomLED trunk flasher; KewlHeel shifter; CycleOps trunk rack; BeadRider seat; Vibranator bar ends; Passenger grab handles; Powerlet outlets; Handlebar RAM mount; RicZ laydown plate; Brukus SaddlebagSecure; 14" flexible antenna; RAM cupholder on trunk; shock Schrader valve relocation.

Gallery: http://www.billanddot.com/victory-xct/
wspollack is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Victory Forums - Victory Motorcycle Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools Search this Thread
Show Printable Version Show Printable Version
Email this Page Email this Page
Search this Thread:

Advanced Search
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome