installed corbin seat and jtd lowers this weekend - Victory Forums - Victory Motorcycle Forum
 4Likes
Reply
 
LinkBack Thread Tools Search this Thread Display Modes
post #1 of 11 (permalink) Old 05-09-2016, 11:11 AM Thread Starter
Member
 
3rdelement's Avatar
 
Join Date: Oct 2014
Location: Castle Rock, Colorado
Posts: 51
Garage
Cool installed corbin seat and jtd lowers this weekend

Well this install took way longer than it should have. During the JTD Lower install i discovered the dealership had incorrectly installed the forged bars and stripped out the 3 bolts holding it on. So the threads were replaced to my satisfaction and i was able to finish up the install this week.
1st note: The jtd lower was designed to a fantastic level of fit. Tight? yes. But the finish is something i am very happy with

2nd note: let ebay be your friend sometimes. Located a brand new corbin seat, used on a showbike with 0 miles on it. And it arrived in all the original packaging and was clean as could be hoped for. It also installed better than the stock magnum seat or the xc seat i had installed.

So i now have a backrest and bracket for sale if anyone needs one.









2015 Victory Magnum / 2005 Suzuki VStrom DL1000

Tour Pack
Forged Highway Bars
CeeBaileys 11" with scoop blocked with vent
Trioval Exhaust
Kicker cs5 speakers
Rockford Fosgate PBR 300x4
Ness Edition Chrome Gauge Rings
Hydro Clutch
JTD Lowers
Lloyds Timing Wheel, High flow air filter, Fuel Controller III
Mustang Vintage wide seat & backrest
Avon Grips
Mini-Ape Handlebars
Witchdoctors license plate laydown bracket
Bad Ace Center Deflector
3rdelement is offline  
Sponsored Links
Advertisement
 
post #2 of 11 (permalink) Old 05-09-2016, 09:30 PM
Senior Member
 
Join Date: Oct 2009
Posts: 152
Default

Very nice! I have a set if those JTD lowers sitting in the garage, needs the upper mounts and some wiring extended
Speakers and lights in them, if anyone is looking.....

Salty
CDN VETS MC

2011 XC TRIKE, Lloydz HPT cams, timing wheel, 1/4 turn throttle and air filter. PCV and Autotune

2013 Indian Chief Vintage, stage 1, DOBECK tuner
SALTY is offline  
post #3 of 11 (permalink) Old 05-09-2016, 10:35 PM
Lifetime Premium
 
Join Date: Dec 2009
Location: Chattanooga, TN
Posts: 1,839
Default

Quote:
Originally Posted by SALTY View Post
Very nice! I have a set if those JTD lowers sitting in the garage, needs the upper mounts and some wiring extended
Speakers and lights in them, if anyone is looking.....
Salty,

Do you have JTD lowers for sale? If so, please let me know. I just bought a set of forged bars for my CCT.

All the best,

Mark


www.bikersforchrist.org

The Bible: Read, Apply, Repeat

"That's a beautiful Victory!"
"Thank you."
"Who makes it?"
"No one."

Who turns Victory into defeat? Polaris Industries, that's who.

2012 Pearl White CCT. Lloyds DR cams, Timing Wheel (+4), Air Filter, 1/4 Turn Throttle Ring, PCV, Tri Oval mufflers, Dyno Tune from Rylan Vos - The Vic Shop: 112/113. Bad Ace Billet tank lifts and Raging Cajun Medium Low & Throaty mufflers added well after the Dyno run.
Chattanooga Mark is offline  
Sponsored Links
Advertisement
 
post #4 of 11 (permalink) Old 05-10-2016, 04:47 AM
Senior Member
 
PaiN's Avatar
 
Join Date: May 2014
Location: CT, USA
Posts: 3,993
Garage
Default

3rdelement....That is one sharp looking build! Nice work

I have no reason too, but if I ever get get a chance I want to try out a Corbin Dual Tour....simply because they look so damn good on the XCs

btw: Corbin will re-upholster your tour trunk pads to match the seat, if you want to go that route

PaiN's Rides on YouTube

"Living life is a great idea, but riding a motorcycle actually gives you a tool to do it..." -me
2013 Sunset Red Cross Country
Vic Tri-Oval Mufflers, Lloydz VM1-DR cams, AF, PC-V @112hp/113tq
Corbin Dual Tour seat, Klock Werks Klip Hanger bars, Vicwapz
Avon Contour grips, Kuryakyn Kinetic boards and rear SwingWings
Victory black LED headlight and Touring Pack, Madstad 9" windshield

Last edited by PaiN; 05-10-2016 at 04:57 AM.
PaiN is offline  
post #5 of 11 (permalink) Old 05-10-2016, 07:53 AM
Senior Member
 
Join Date: Oct 2009
Posts: 152
Default

V
Quote:
Originally Posted by Chattanooga Mark View Post
Salty,

Do you have JTD lowers for sale? If so, please let me know. I just bought a set of forged bars for my CCT.
Yes, I would sell them. The wiring would have to be extended as they were cut when uninstalled and I believe the upper mounts would need to be purchased from JTD.
The lowers mounts are still on my trike but I need a reason to get busy and get them off lol
Speakers and lights in them.

Was thinking 200 USD and postage. Email me at

salty01attelus.net Change the at to @

Can
Send you some pics tonight after the work thing.

Salty
CDN VETS MC

2011 XC TRIKE, Lloydz HPT cams, timing wheel, 1/4 turn throttle and air filter. PCV and Autotune

2013 Indian Chief Vintage, stage 1, DOBECK tuner

Last edited by SALTY; 08-20-2016 at 07:39 PM. Reason: Price
SALTY is offline  
post #6 of 11 (permalink) Old 05-10-2016, 08:00 AM
Senior Member
 
Join Date: Oct 2009
Posts: 152
Default

Quote:
Originally Posted by Chattanooga Mark View Post
Salty,

Do you have JTD lowers for sale? If so, please let me know. I just bought a set of forged bars for my CCT.
Here's an old pic
Attached Images
File Type: jpg image.jpg (14.8 KB, 28 views)

Salty
CDN VETS MC

2011 XC TRIKE, Lloydz HPT cams, timing wheel, 1/4 turn throttle and air filter. PCV and Autotune

2013 Indian Chief Vintage, stage 1, DOBECK tuner
SALTY is offline  
post #7 of 11 (permalink) Old 05-10-2016, 08:30 AM
Senior Member
 
DirtyDan's Avatar
 
Join Date: Aug 2013
Location: San Tan Valley, AZ
Posts: 1,501
Default

Nice looking trike Salty. Who makes the conversion? CSC?

2012 Cross Country Champion Trike in process with all the usual mods
2010 cross country, engine change out in process
All sold
2012 XCT,
03/07/12 RG Chopped Bagger
1996 Road King Chopped
2003 FLHTCUI
2003 Big Bear Choppers DA
2000 Chopper Guys rigid EVO
1995 FLHTCU w/Hennigan sidecar
1947 Knuckle
1990 FXRS Convt
1986 Honda CX650C
DirtyDan is offline  
post #8 of 11 (permalink) Old 05-11-2016, 10:17 AM Thread Starter
Member
 
3rdelement's Avatar
 
Join Date: Oct 2014
Location: Castle Rock, Colorado
Posts: 51
Garage
Default

Quote:
Originally Posted by PaiN View Post
3rdelement....That is one sharp looking build! Nice work

I have no reason too, but if I ever get get a chance I want to try out a Corbin Dual Tour....simply because they look so damn good on the XCs

btw: Corbin will re-upholster your tour trunk pads to match the seat, if you want to go that route
thankyou very much! a buddy of mine has this same seat and loves it. so figured with a medium and a long trip planned within the next 2 months that seating should be taken care of.

2015 Victory Magnum / 2005 Suzuki VStrom DL1000

Tour Pack
Forged Highway Bars
CeeBaileys 11" with scoop blocked with vent
Trioval Exhaust
Kicker cs5 speakers
Rockford Fosgate PBR 300x4
Ness Edition Chrome Gauge Rings
Hydro Clutch
JTD Lowers
Lloyds Timing Wheel, High flow air filter, Fuel Controller III
Mustang Vintage wide seat & backrest
Avon Grips
Mini-Ape Handlebars
Witchdoctors license plate laydown bracket
Bad Ace Center Deflector
3rdelement is offline  
post #9 of 11 (permalink) Old 05-12-2016, 09:20 PM
Senior Member
 
Join Date: Oct 2009
Posts: 152
Default

Quote:
Originally Posted by DirtyDan View Post
Nice looking trike Salty. Who makes the conversion? CSC?
Yes, it's a CSC

Handles great, thx!

Salty
CDN VETS MC

2011 XC TRIKE, Lloydz HPT cams, timing wheel, 1/4 turn throttle and air filter. PCV and Autotune

2013 Indian Chief Vintage, stage 1, DOBECK tuner
SALTY is offline  
post #10 of 11 (permalink) Old 08-20-2016, 07:42 PM
Senior Member
 
Join Date: Oct 2009
Posts: 152
Default

Quote:
Originally Posted by PaiN View Post
3rdelement....That is one sharp looking build! Nice work

I have no reason too, but if I ever get get a chance I want to try out a a Corbin Dual Tour....simply because they look so damn good on the XCs

btw: Corbin will re-upholster your tour trunk pads to match the seat, if you want to go that route
Pain, I have a Corbin Dual tour for sale with dual heat controls.
My wife didn't like it

[email protected]. If interested

Salty
CDN VETS MC

2011 XC TRIKE, Lloydz HPT cams, timing wheel, 1/4 turn throttle and air filter. PCV and Autotune

2013 Indian Chief Vintage, stage 1, DOBECK tuner
SALTY is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Victory Forums - Victory Motorcycle Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools Search this Thread
Show Printable Version Show Printable Version
Email this Page Email this Page
Search this Thread:

Advanced Search
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome