PCV with auto tune.... WTF - Victory Forums - Victory Motorcycle Forum
 1Likes
Reply
 
LinkBack Thread Tools Search this Thread Display Modes
post #1 of 23 (permalink) Old 05-23-2016, 01:27 PM Thread Starter
Lifetime Premium
 
Join Date: Apr 2014
Location: Roanoke , Virginia
Posts: 1,245
Default PCV with auto tune.... WTF

I am considering PCV with Auto tune ( mainly because I dont have time to find and go to a good tuner). With that said, i just called the dealer tro see what they would charge me to install the two......
well the service guy told me the the Dual band O2 Sensors for the Autotune will NOT fit the location where the stock O2 sensors came from and that they have to take the exhaust off and rework to get them to fit ??? does this sound like bullshit to you guys ?

Roanoke, Virginia (originally from Ithaca, NY)
USMC - Vietnam
2013 Victory Cross Country Tour
stage 1 Tri-Ovals
Lloydz wheel at +4
Lloydz Air Filter
PCV
Dynoed By Nick at 804 MotorSports
1" tank risers
O2 unplugged
1/4 turn ring
JPokerwinski is offline  
Sponsored Links
Advertisement
 
post #2 of 23 (permalink) Old 05-23-2016, 01:34 PM
Super Moderator
 
broggyr's Avatar
 
Join Date: Apr 2013
Location: Naugatuck, CT
Posts: 6,308
Garage
Default

Quote:
Originally Posted by JPokerwinski View Post
I am considering PCV with Auto tune ( mainly because I dont have time to find and go to a good tuner). With that said, i just called the dealer tro see what they would charge me to install the two......
well the service guy told me the the Dual band O2 Sensors for the Autotune will NOT fit the location where the stock O2 sensors came from and that they have to take the exhaust off and rework to get them to fit ??? does this sound like bullshit to you guys ?
Without knowing anything about this other than what I have read here, I don't remember seeing anything in regard to this so I'd be wary.

Take it for what it's worth.



2013 XCT, Boardwalk Blue w/ Vicwrapz
S&S Cams, Lloydz filter & ATS +5, PCV, UD pulley, Alto Red Eagle clutch plates
Madstad Windshield, 5000K HID, TriOvals, Memphis Shields wings, Ultimate seat
JVC KD-X35MDT, PBR300X4, Polk DB6502, DaytonAudio ND140-4 rear
HyperLites, LED driving lights, Lloydz dyno 105+H and 117+T
Arlen Ness blinkers, KlockWerks KlipHanger bars, Avon grips

Spectro Golden 4 20w40 for Victory L.SG424, Kury Sabertooth LEDs
THE FEW, THE PROUD, THE OBSCURE. TTWFO2
broggyr is offline  
post #3 of 23 (permalink) Old 05-23-2016, 01:41 PM Thread Starter
Lifetime Premium
 
Join Date: Apr 2014
Location: Roanoke , Virginia
Posts: 1,245
Default

Quote:
Originally Posted by broggyr View Post
Without knowing anything about this other than what I have read here, I don't remember seeing anything in regard to this so I'd be wary.

Take it for what it's worth.
well its not like i was going to take it to them... but i have not heard at all about the dual band sensors not fitting on my CCT

Roanoke, Virginia (originally from Ithaca, NY)
USMC - Vietnam
2013 Victory Cross Country Tour
stage 1 Tri-Ovals
Lloydz wheel at +4
Lloydz Air Filter
PCV
Dynoed By Nick at 804 MotorSports
1" tank risers
O2 unplugged
1/4 turn ring
JPokerwinski is offline  
Sponsored Links
Advertisement
 
post #4 of 23 (permalink) Old 05-23-2016, 02:01 PM
Lifetime Premium
 
half_crazy's Avatar
 
Join Date: Sep 2011
Location: Southern Maryland
Posts: 4,826
Default

Harleys have small 02 sensors and the bungs won't work with wide bands. I have not seen this with Victory.

2006 Victory Kingpin
Lloydz 116" Stroker/Big Bore, .495 Cams, Torque Tubes Airbox,
RPW Thor Pipe, Lloydz ECU Flash, PC-III, PTS (-2), Rivera
Primo Clutch Spring, 31 Tooth Pulley w/Buell Belt.
half_crazy is offline  
post #5 of 23 (permalink) Old 05-23-2016, 02:31 PM
Lifetime Premium
 
Tarzan's Avatar
 
Join Date: Apr 2009
Location: Chandler,Az.
Posts: 977
Default

I have a PC5 & Autotune on my 14 XC and had this setup on my 11 XR too. It fit both of them with no problem. So yes, they will bolt right in, unless they changed the O2 sensors that came with the Auto-tune.

'14 Ness XC
Tarzan is offline  
post #6 of 23 (permalink) Old 05-23-2016, 03:00 PM
Senior Member
 
bnhender's Avatar
 
Join Date: Jan 2013
Location: Navasota, TX
Posts: 193
Garage
Default

Quote:
Originally Posted by JPokerwinski View Post
I am considering PCV with Auto tune ( mainly because I dont have time to find and go to a good tuner). With that said, i just called the dealer tro see what they would charge me to install the two......
well the service guy told me the the Dual band O2 Sensors for the Autotune will NOT fit the location where the stock O2 sensors came from and that they have to take the exhaust off and rework to get them to fit ??? does this sound like bullshit to you guys ?
I know you have a 2013, but someone mentioned in another post that they pulled the O2's out of their 2016 and they got an error light. I have a 2012 XR and pulled and plugged the sensors with no issue...Maybe he is thinking of a 2016 and maybe they have changed the type of sensor and they no longer fit the wide-band AutoTune ones??

___________________________________
Bill
2012 Cross Roads (Sunset Red)
Stage 1 flash
Lloydz Air Filter
Lloydz Idle Control Valve
Lloydz Adjustable Timing Wheel
Freedom Performance True-Dual Exhaust
VM1-DR cams
O2 Sensors disconnected
PCV
21" Adrenaline Front Wheel
Cee Bailey 24" windscreen w/ lowers
Tachometer
Small Bullet Light Bar
LED Headlight
Grasshopper driver backrest
Victory passenger backrest
Chrome saddlebag rails

2017 Octane
Shorty pipes

Navasota, TX
bnhender is offline  
post #7 of 23 (permalink) Old 05-23-2016, 03:03 PM
Super Moderator
 
broggyr's Avatar
 
Join Date: Apr 2013
Location: Naugatuck, CT
Posts: 6,308
Garage
Default

I have a 2013 and I pulled my O2's with no issue. Ironically, the only time I got an error light was trying to hook them up to that Cobra PowrPro controller I had. If I left them out of the loop, fine.



2013 XCT, Boardwalk Blue w/ Vicwrapz
S&S Cams, Lloydz filter & ATS +5, PCV, UD pulley, Alto Red Eagle clutch plates
Madstad Windshield, 5000K HID, TriOvals, Memphis Shields wings, Ultimate seat
JVC KD-X35MDT, PBR300X4, Polk DB6502, DaytonAudio ND140-4 rear
HyperLites, LED driving lights, Lloydz dyno 105+H and 117+T
Arlen Ness blinkers, KlockWerks KlipHanger bars, Avon grips

Spectro Golden 4 20w40 for Victory L.SG424, Kury Sabertooth LEDs
THE FEW, THE PROUD, THE OBSCURE. TTWFO2
broggyr is offline  
post #8 of 23 (permalink) Old 05-23-2016, 03:04 PM Thread Starter
Lifetime Premium
 
Join Date: Apr 2014
Location: Roanoke , Virginia
Posts: 1,245
Default

Quote:
Originally Posted by bnhender View Post
I know you have a 2013, but someone mentioned in another post that they pulled the O2's out of their 2016 and they got an error light. I have a 2012 XR and pulled and plugged the sensors with no issue...Maybe he is thinking of a 2016 and maybe they have changed the type of sensor and they no longer fit the wide-band AutoTune ones??
I disconnected my sensors on my 2013 and i have no problems. I would just like to get a PCV put on. I wish i could have it dynoed but i can never get to Loydz or Kyle

Roanoke, Virginia (originally from Ithaca, NY)
USMC - Vietnam
2013 Victory Cross Country Tour
stage 1 Tri-Ovals
Lloydz wheel at +4
Lloydz Air Filter
PCV
Dynoed By Nick at 804 MotorSports
1" tank risers
O2 unplugged
1/4 turn ring
JPokerwinski is offline  
post #9 of 23 (permalink) Old 05-23-2016, 03:08 PM
Senior Member
 
bnhender's Avatar
 
Join Date: Jan 2013
Location: Navasota, TX
Posts: 193
Garage
Default

Quote:
Originally Posted by JPokerwinski View Post
I disconnected my sensors on my 2013 and i have no problems. I would just like to get a PCV put on. I wish i could have it dynoed but i can never get to Loydz or Kyle
Right, but I am saying is that maybe the dealer did not hear you say its a 2013, and that maybe 2016's are different and he is wrong about the 2013.

As others have said, they have done this with no issues.

___________________________________
Bill
2012 Cross Roads (Sunset Red)
Stage 1 flash
Lloydz Air Filter
Lloydz Idle Control Valve
Lloydz Adjustable Timing Wheel
Freedom Performance True-Dual Exhaust
VM1-DR cams
O2 Sensors disconnected
PCV
21" Adrenaline Front Wheel
Cee Bailey 24" windscreen w/ lowers
Tachometer
Small Bullet Light Bar
LED Headlight
Grasshopper driver backrest
Victory passenger backrest
Chrome saddlebag rails

2017 Octane
Shorty pipes

Navasota, TX
bnhender is offline  
post #10 of 23 (permalink) Old 05-23-2016, 03:29 PM
Senior Member
 
visionjohnny's Avatar
 
Join Date: Sep 2010
Location: minnesota
Posts: 12,946
Default

2016 have a 4 wire 02 sensor.

Don't understand paying for auto tune when you can get a dyno tune for less money and it will be right on.
BS for don't have the time

2008 Vision
Mpls, MN.

Please add your state and model of bike you have. Click user CP @ top of page and then far left click edit signature. Thanks
visionjohnny is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Victory Forums - Victory Motorcycle Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools Search this Thread
Show Printable Version Show Printable Version
Email this Page Email this Page
Search this Thread:

Advanced Search
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome