side stand pad - Victory Forums - Victory Motorcycle Forum
 30Likes
Reply
 
LinkBack Thread Tools Search this Thread Display Modes
post #1 of 47 (permalink) Old 06-20-2016, 12:59 PM Thread Starter
Lifetime Premium
 
Join Date: Apr 2014
Location: Roanoke , Virginia
Posts: 1,250
Default side stand pad

Anyone replace their side stand pad yet ? are those rivets holding it on ?

Roanoke, Virginia (originally from Ithaca, NY)
USMC - Vietnam
2013 Victory Cross Country Tour
stage 1 Tri-Ovals
Lloydz wheel at +4
Lloydz Air Filter
PCV
Dynoed By Nick at 804 MotorSports
1" tank risers
O2 unplugged
1/4 turn ring
JPokerwinski is offline  
Sponsored Links
Advertisement
 
post #2 of 47 (permalink) Old 06-20-2016, 01:24 PM
Senior Member
 
RICZ's Avatar
 
Join Date: Sep 2010
Location: Portland,Oregon
Posts: 12,097
Default

Yup, those are rivets and I replaced them with truss head screws and nylock nuts for ease of doing the job the next time.
Tech23 likes this.

2010 Midnight Cherry XR. 7Jurock, Lloydz AF, ATS, AFR tuned VFCIII, IAV, and T-6 and locally repacked pipes = big smiles. SOLD to a dear friend, so it's still in the family."
2017 Spyder F3 Limited - keeps this old guy in the wind and riding with friends.
Cure that ugly stand up license plate with the cheapest and best laydown bracket. Click this:
https://www.victoryforums.com/11-ven...t-x-bikes.html
RICZ is offline  
post #3 of 47 (permalink) Old 06-20-2016, 01:28 PM Thread Starter
Lifetime Premium
 
Join Date: Apr 2014
Location: Roanoke , Virginia
Posts: 1,250
Default

did the nylock nuts stick out too far ? what di d you use about a 1/4-20 ?

Roanoke, Virginia (originally from Ithaca, NY)
USMC - Vietnam
2013 Victory Cross Country Tour
stage 1 Tri-Ovals
Lloydz wheel at +4
Lloydz Air Filter
PCV
Dynoed By Nick at 804 MotorSports
1" tank risers
O2 unplugged
1/4 turn ring
JPokerwinski is offline  
Sponsored Links
Advertisement
 
post #4 of 47 (permalink) Old 06-20-2016, 01:56 PM
Senior Member
 
RICZ's Avatar
 
Join Date: Sep 2010
Location: Portland,Oregon
Posts: 12,097
Default

The nut went on the top, so clearance was no problem. I don't recall the size--maybe 10-28. Whatever it was that fit the holes the rivets were in.

2010 Midnight Cherry XR. 7Jurock, Lloydz AF, ATS, AFR tuned VFCIII, IAV, and T-6 and locally repacked pipes = big smiles. SOLD to a dear friend, so it's still in the family."
2017 Spyder F3 Limited - keeps this old guy in the wind and riding with friends.
Cure that ugly stand up license plate with the cheapest and best laydown bracket. Click this:
https://www.victoryforums.com/11-ven...t-x-bikes.html
RICZ is offline  
post #5 of 47 (permalink) Old 06-20-2016, 02:05 PM
Senior Member
 
Judge Redd's Avatar
 
Join Date: Nov 2013
Location: Hanover, VA
Posts: 776
Garage
Default

WD's replacement kit comes with screws instead of rivets as well.

2014 Judge(Havasu Red) PC-V - ATS(+4) - RPW Boom Sticks - HOHVM1-DR cams - Torque Tubes (dyno sheet) 1/4 turn throttle - OPT7 LED headlight kit - OEM bags, backrest, and W/S
Judge Redd is offline  
post #6 of 47 (permalink) Old 06-20-2016, 02:08 PM Thread Starter
Lifetime Premium
 
Join Date: Apr 2014
Location: Roanoke , Virginia
Posts: 1,250
Default

well i just thought of using barrell screws.

Roanoke, Virginia (originally from Ithaca, NY)
USMC - Vietnam
2013 Victory Cross Country Tour
stage 1 Tri-Ovals
Lloydz wheel at +4
Lloydz Air Filter
PCV
Dynoed By Nick at 804 MotorSports
1" tank risers
O2 unplugged
1/4 turn ring
JPokerwinski is offline  
post #7 of 47 (permalink) Old 06-20-2016, 03:12 PM
Senior Member
 
RICZ's Avatar
 
Join Date: Sep 2010
Location: Portland,Oregon
Posts: 12,097
Default

After eyeballing the pad, I see I placed the nuts on the bottom. For screws, I used button w/ allen heads. I would not trust barrel screws.

2010 Midnight Cherry XR. 7Jurock, Lloydz AF, ATS, AFR tuned VFCIII, IAV, and T-6 and locally repacked pipes = big smiles. SOLD to a dear friend, so it's still in the family."
2017 Spyder F3 Limited - keeps this old guy in the wind and riding with friends.
Cure that ugly stand up license plate with the cheapest and best laydown bracket. Click this:
https://www.victoryforums.com/11-ven...t-x-bikes.html
RICZ is offline  
post #8 of 47 (permalink) Old 06-20-2016, 06:16 PM
Senior Member
 
visionjohnny's Avatar
 
Join Date: Sep 2010
Location: minnesota
Posts: 12,947
Default

my rubber pad went a way 2 years ago.
Keep forgetting to get one. Haven't had a problem with out one
broggyr likes this.

2008 Vision
Mpls, MN.

Please add your state and model of bike you have. Click user CP @ top of page and then far left click edit signature. Thanks
visionjohnny is offline  
post #9 of 47 (permalink) Old 06-20-2016, 06:59 PM
Senior Member
 
RICZ's Avatar
 
Join Date: Sep 2010
Location: Portland,Oregon
Posts: 12,097
Default

Quote:
Originally Posted by visionjohnny View Post
my rubber pad went a way 2 years ago.
Keep forgetting to get one. Haven't had a problem with out one
Its a $7 part...what's the holdup? We can start a fund for you.
broggyr likes this.

2010 Midnight Cherry XR. 7Jurock, Lloydz AF, ATS, AFR tuned VFCIII, IAV, and T-6 and locally repacked pipes = big smiles. SOLD to a dear friend, so it's still in the family."
2017 Spyder F3 Limited - keeps this old guy in the wind and riding with friends.
Cure that ugly stand up license plate with the cheapest and best laydown bracket. Click this:
https://www.victoryforums.com/11-ven...t-x-bikes.html
RICZ is offline  
post #10 of 47 (permalink) Old 06-20-2016, 07:38 PM
Lifetime Premium
 
BP6666VR's Avatar
 
Join Date: Dec 2013
Location: World Citizen = A peaceful and peacemaking individual, both in daily life and contacts with others
Posts: 5,950
Default

I bought 3 sets of WD replacement rubber and I just installed the last one .... grrrrr they DON'T last very long ... next time I will make my own from better quality rubber ...

EDIT, the barrel screw supplied by WD works very well, just some locktity and it holds ... of course alan key "button" type male and barrel female would work better??

Andre
@
TaPaTaLk

JACKPOT 2013 orange MADNESS :-) *HOH-VM1-DR*TachoMeter*PowCom-5*AutoTune*ATS*TorTube & (IAC) & nitro*Swept exhaust*LYNDALL & EBC brakes Front & Rear*Stainless Beads*Fwd Contr 4" *2 x Bad Boy Air Horn*Seven Color Lizard*NGK plugs*Blue Spark Plug Wir*Victory Oil*KN Oil filter*Oil Analysis*Clutch Cover*Kickst Repl Rubb*Invisble-A-Key*L.E.D. Batt. Gauge*Pulsating Brake Light*VictoryHID*Lice Bracket OVAL*BoltKit-Chrome*

Cross Country Tour 2014 [B]

Last edited by BP6666VR; 06-20-2016 at 07:43 PM.
BP6666VR is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Victory Forums - Victory Motorcycle Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools Search this Thread
Show Printable Version Show Printable Version
Email this Page Email this Page
Search this Thread:

Advanced Search
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome