moving boards forward and shifter linkage help
If it will help...I moved my boards forwars and ran into the same problem...the fix was simple...I pulled the actuator arm off of the trans arm and rotated it clockwise a tooth or two. After putting everything back together with locktite...no problems at all with fitting the shift rod. No trouble shifting either. did not cost anything to do.
Hope this helps.
MSgt Ret. Security Forces USAF/Santa Maria, CA
2011 Victory Cross Country (Imp Blue)
-Mods-Vic Military Salute Wedge Covers/Madstad with stock shield/Floor Board Hwy Pegs/2012 Hard Lowers/Hard Bag Bars/adj. pass. foot rests/+2 SRVT Pull Back Bars/Mirror extenders/LED driving lights/WOLO horn/RicZ laid down plate bracket/Kuryakyn Brake Pedal/Signal Dynamics headlight modulator/Custom Dynamics Brake light Strobe/LED rear plate/1/4 turn throttle ring/Lloydz timing wheel +4