Rubber washers for windshield...finally - Victory Forums - Victory Motorcycle Forum
 
LinkBack Thread Tools
Old 02-28-2014, 06:10 AM Thread Starter
Senior Member
 
arkiebiker's Avatar
 
Join Date: Sep 2011
Location: Searcy, AR
Posts: 1,228
Default Rubber washers for windshield...finally

I have looked at my local hardware stores for washers to replace the ones on the windshield of the XCT. I have found some that are OK...and some that didn't work so well (O-rings)...and finally found the one that is pretty similar to the ones that are OEM with the windshield that Ma Vic does not sell anywhere (at least that I could find).

It's called an Aerator Washer 22/32" O.D x 31/64" I.D Stock# 36170 B and is manufactured by Danco.

There's a guy on eBay that is selling them and they seem to work pretty doggone well.

I don't think I can posts a link here...so the sellers name on eBay is "cylysh30".

Or you can MESSAGE me and I'll send you a link. I don't know the dude, I've never heard of the dude, I'm just glad I found a place to buy me a BULK of these washers. THEY are a pain for sure.

2012 Victory Cross Country Tour
******************************************
Searcy, AR
Blytheville, AR (Hometown and the BEST BBQ Sandwiches in the world)
************************************************** ******
Arkansas Bikers Website
http://www.arkansasbiker.net
Garmin Zumo GPS Forums
http://www.zumoforums.com
arkiebiker is offline  
Sponsored Links
Advertisement
 
Old 04-30-2015, 09:36 AM
Senior Member
 
beast30's Avatar
 
Join Date: Jun 2012
Location: West Fargo,ND
Posts: 203
Default

great find! Thanks!

2012 XC Imperial Blue/Blacked out, LLoyds filter, LLoyds timing wheel,
VM1 DR cams, PC5, LLoyds ECM, Big Gonzo, KM meat hook bars (internally wired), Conquest underdrive pulley, KM instrument bezels, JTD lowers with speakers, PBR300 amp with Polk 6.5, .40 cal cheese wedges, tinted turn and tail
beast30 is offline  
Old 04-30-2015, 11:14 AM
Senior Member
 
visionjohnny's Avatar
 
Join Date: Sep 2010
Location: minnesota
Posts: 12,937
Default

Is it one of these. No reason why you can't post a link here
http://www.ebay.com/sch/i.html?_odkw...70+B+&_sacat=0

2008 Vision
Mpls, MN.

Please add your state and model of bike you have. Click user CP @ top of page and then far left click edit signature. Thanks
visionjohnny is offline  
Sponsored Links
Advertisement
 
Old 06-30-2015, 09:40 AM
Senior Member
 
Join Date: Sep 2012
Location: Winsted, MN
Posts: 372
Default

Thanks for this tip! I just had to order some because I realized I lost one recently when I took the shield off for some work under the fairing.

Rob

2012 Victory Cross Country - Imperial Blue
2008 Honda CBR1000RR - Winning Red
2003 Honda VTX 1800C - Illusion Blue
BigBlue is offline  
Old 06-30-2015, 06:18 PM
Senior Member
 
austxdan's Avatar
 
Join Date: Nov 2014
Location: Austin, TX
Posts: 227
Garage
Default

Thanks. I recently bought some rubber grommets at Home Depot that I'm currently using. They are a good snug fit, but a PITA to install. Since I tend to swap shields more often than I should, it will be nice to have a back stock of better washers.

D.


Sent from Motorcycle.com Free App

2014 Victory Cross Country - Suede Silver and Flames
Cee Bailey's 11" Dark Smoke windscreen
Miller Mufflers - Short Baffles
Lloydz ATS Timing Gear (+4)
Avon Grips w/Lloydz 1/4 turn Throttle Ring
RICZ Lay down license bracket
Sabertooth LED Saddlebag lights
"Goody's Custom" fork mounted lowers

Austin, TX

"In the beginning God created man, but seeing him so feeble, He gave him the dog." ---Toussenel
austxdan is offline  
Old 06-30-2015, 09:43 PM
Lifetime Premium
 
Join Date: Dec 2009
Location: Chattanooga, TN
Posts: 1,826
Default

Most decent Victory dealers have the oem rubber washers in stock. They're inexpensive, flatten out over time and should be replaced after about every second removal. I always keep 6 new ones in my CCT parts stash.

All the best,

Mark


www.bikersforchrist.org

The Bible: Read, Apply, Repeat

"That's a beautiful Victory!"
"Thank you."
"Who makes it?"
"No one."

Who turns Victory into defeat? Polaris Industries, that's who.

2012 Pearl White CCT. Lloyds DR cams, Timing Wheel (+4), Air Filter, 1/4 Turn Throttle Ring, PCV, Tri Oval mufflers, Dyno Tune from Rylan Vos - The Vic Shop: 112/113. Bad Ace Billet tank lifts and Raging Cajun Medium Low & Throaty mufflers added well after the Dyno run.
Chattanooga Mark is offline  
Old 07-01-2015, 09:16 AM
Senior Member
 
Join Date: Sep 2012
Location: Winsted, MN
Posts: 372
Default

Quote:
Originally Posted by Chattanooga Mark View Post
Most decent Victory dealers have the oem rubber washers in stock. They're inexpensive, flatten out over time and should be replaced after about every second removal. I always keep 6 new ones in my CCT parts stash.
Do you have a Vic part number for them? The OP said he could not find them. I'd rather buy the actual Vic part if they aren't outrageously expensive.

Rob

2012 Victory Cross Country - Imperial Blue
2008 Honda CBR1000RR - Winning Red
2003 Honda VTX 1800C - Illusion Blue
BigBlue is offline  
Old 07-01-2015, 09:26 AM
Lifetime Premium
 
LILMAGS500's Avatar
 
Join Date: Apr 2013
Location: Peoples Republic of Massachusetts
Posts: 9,684
Garage
Default

I buy them right from Vic , my dealer stocks them by the 100's . I bought 10 about a month ago , it was under 5.00 for all 10 . Also bought 10 side cover grommets , about 10.00 for them , now if I need one or the other I have them right in the bike .

2014 Cross Country
2014 XC , Lloyds A/F , Timing Wheel +4 , PCV , Miller Mufflers , 1/4 Turn Throttle Ring , Dyno Tuned by KMC Powersports 98HP 113 TQ
LILMAGS500 is offline  
Old 07-01-2015, 09:33 AM
Senior Member
 
Join Date: Sep 2012
Location: Winsted, MN
Posts: 372
Default

Quote:
Originally Posted by LILMAGS500 View Post
I buy them right from Vic , my dealer stocks them by the 100's . I bought 10 about a month ago , it was under 5.00 for all 10 . Also bought 10 side cover grommets , about 10.00 for them , now if I need one or the other I have them right in the bike .
Well, if you find a part number please post it. My dealer is 50 miles away so I'd need to order them.

Unless you want to sell me some...

2012 Victory Cross Country - Imperial Blue
2008 Honda CBR1000RR - Winning Red
2003 Honda VTX 1800C - Illusion Blue

Last edited by BigBlue; 07-01-2015 at 09:36 AM.
BigBlue is offline  
Old 07-01-2015, 09:38 AM
Lifetime Premium
 
LILMAGS500's Avatar
 
Join Date: Apr 2013
Location: Peoples Republic of Massachusetts
Posts: 9,684
Garage
Default

Quote:
Originally Posted by BigBlue View Post
Well, if you find a part number please post it. My dealer is 50 miles away so I'd need to order them.

Unless you want to sell me some...
If it wasn't a monsoon here today I would have them right in the bike , I can post it up after work for you .

2014 Cross Country
2014 XC , Lloyds A/F , Timing Wheel +4 , PCV , Miller Mufflers , 1/4 Turn Throttle Ring , Dyno Tuned by KMC Powersports 98HP 113 TQ
LILMAGS500 is offline  
Sponsored Links
Advertisement
 
 

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Victory Forums - Victory Motorcycle Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Thread Tools



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome