screws in the engine?. - Victory Forums - Victory Motorcycle Forum
Reply
 
LinkBack Thread Tools Search this Thread Display Modes
post #1 of 24 (permalink) Old 05-01-2014, 09:59 PM Thread Starter
Lifetime Premium
 
Dos_Equis's Avatar
 
Join Date: Apr 2014
Location: Houston, TX
Posts: 159
Garage
Default screws in the engine?.

Today was inspecting the bike after my commute from work I found this two screws:


Any idea where they come from?. I am pretty sure they have been there after my 500 mile service.



2013 Cross Country (Sunset Red)
-- Rusty Jones Customs mod mufflers, Power Commander-V, Lloydz Hi-Flow Air Filter, Lloydz ATS @ 6+, Tarzanz Bagger barz.
------------------------------------------
Houston, TX

Last edited by Dos_Equis; 05-02-2014 at 08:41 AM.
Dos_Equis is offline  
Sponsored Links
Advertisement
 
post #2 of 24 (permalink) Old 05-01-2014, 10:07 PM
Lifetime Premium
 
Weeds's Avatar
 
Join Date: Apr 2013
Location: Minnesota
Posts: 728
Garage
Default

Can u post a pic..

2013 XCT, Red,
Tri Ovals, S1 Package, Accel 8.8 Wires,Yellow.
Wheel @ +4, Kuryakyn Shift/Brake Pegs, o2s Disabled.
Utopia Backrest. KewlMetal Heal Shifter with Kuryakyn pegs ..
Lubrication Provided By Amsoil..

Even duct tape can't fix stupid....but it will muffle the sound
Weeds is offline  
post #3 of 24 (permalink) Old 05-01-2014, 10:42 PM
Senior Member
 
SilvrT's Avatar
 
Join Date: Aug 2012
Location: Surrey, BC Canada
Posts: 1,365
Garage
Default

Quote:
Originally Posted by Weeds View Post
Can u post a pic..
There is one but it shows nothing. I discovered that by quoting his message.

[ IMG ] http://www.1130cc.com/forums/picture...ictureid=14290 [ /IMG ]

2013 RED XCT

Live to Love - Love to Ride
Life's a Venture on my Victory

----------------------------
Lloydz Air Filter
Lloydz Timing Wheel
Power Commander V
Autotune
CATs removed
Stage 1 flash
HD Trunk Rack
FIAAM Air Horn
PIAA 1100x Lamps
D&D Slip-on Mufflers
HID High & Low
KuryAkyn Sabertooth saddlebag tail lights
Victory Apes
Michelin Primacy Alpin PA3 ZP 195/55-16
------------------------------------

SilvrT is offline  
Sponsored Links
Advertisement
 
post #4 of 24 (permalink) Old 05-01-2014, 11:56 PM
Senior Member
 
RICZ's Avatar
 
Join Date: Sep 2010
Location: Portland,Oregon
Posts: 12,018
Default

XX....how about a description if you can't post a photo? Type of head / size of thread / length / color / stainless?

2010 Midnight Cherry XR. 7Jurock, Lloydz AF, ATS, AFR tuned VFCIII, IAV, and T-6 and locally repacked pipes = big smiles. SOLD to a dear friend, so it's still in the family."
2017 Spyder F3 Limited - keeps this old guy in the wind and riding with friends.
Cure that ugly stand up license plate with the cheapest and best laydown bracket. Click this:
https://www.victoryforums.com/11-ven...t-x-bikes.html
RICZ is offline  
post #5 of 24 (permalink) Old 05-02-2014, 06:56 AM
Senior Member
 
bnhender's Avatar
 
Join Date: Jan 2013
Location: Navasota, TX
Posts: 193
Garage
Default

Quote:
Originally Posted by Dos_Equis View Post
Today was inspecting the bike after my commute from work I found this two screws:


Any idea where they come from?. I am pretty sure they have been there after my 500 mile service.


If it were me, I'd check my own head. I've been told that I have a few screws loose...

___________________________________
Bill
2012 Cross Roads (Sunset Red)
Stage 1 flash
Lloydz Air Filter
Lloydz Idle Control Valve
Lloydz Adjustable Timing Wheel
Freedom Performance True-Dual Exhaust
VM1-DR cams
O2 Sensors disconnected
PCV
21" Adrenaline Front Wheel
Cee Bailey 24" windscreen w/ lowers
Tachometer
Small Bullet Light Bar
LED Headlight
Grasshopper driver backrest
Victory passenger backrest
Chrome saddlebag rails

2017 Octane
Shorty pipes

Navasota, TX
bnhender is offline  
post #6 of 24 (permalink) Old 05-02-2014, 07:18 AM
Junior Member
 
Radzman's Avatar
 
Join Date: Dec 2012
Location: Mississauga Canada
Posts: 9
Default

If your bike is brand new lately,perhaps they were for the battery as there are 2 screws that are shipped in a plastic bag that should be used to connect the battery as it is shipped not connected from the factory.

Radzman,
2013 Vision - Bronze
(2005 Kingpin - traded)
Radzman is offline  
post #7 of 24 (permalink) Old 05-02-2014, 08:18 AM
Senior Member
 
SilvrT's Avatar
 
Join Date: Aug 2012
Location: Surrey, BC Canada
Posts: 1,365
Garage
Default

Quote:
Originally Posted by bnhender View Post
If it were me, I'd check my own head. I've been told that I have a few screws loose...
a "few" ???

2013 RED XCT

Live to Love - Love to Ride
Life's a Venture on my Victory

----------------------------
Lloydz Air Filter
Lloydz Timing Wheel
Power Commander V
Autotune
CATs removed
Stage 1 flash
HD Trunk Rack
FIAAM Air Horn
PIAA 1100x Lamps
D&D Slip-on Mufflers
HID High & Low
KuryAkyn Sabertooth saddlebag tail lights
Victory Apes
Michelin Primacy Alpin PA3 ZP 195/55-16
------------------------------------

SilvrT is offline  
post #8 of 24 (permalink) Old 05-02-2014, 08:32 AM Thread Starter
Lifetime Premium
 
Dos_Equis's Avatar
 
Join Date: Apr 2014
Location: Houston, TX
Posts: 159
Garage
Default

Quote:
Originally Posted by RICZ View Post
XX....how about a description if you can't post a photo? Type of head / size of thread / length / color / stainless?
Interesting. I can see the picture.

2013 Cross Country (Sunset Red)
-- Rusty Jones Customs mod mufflers, Power Commander-V, Lloydz Hi-Flow Air Filter, Lloydz ATS @ 6+, Tarzanz Bagger barz.
------------------------------------------
Houston, TX
Dos_Equis is offline  
post #9 of 24 (permalink) Old 05-02-2014, 08:47 AM
Senior Member
 
Join Date: Sep 2011
Location: wisconsin
Posts: 117
Default

They might be the two bolts that hold the seat on

2006 kingpin
S&S Intake
Hard Krome 3in big straights
Ness Ram bars
tfkp is offline  
post #10 of 24 (permalink) Old 05-02-2014, 10:36 AM
Senior Member
 
ammo_umb's Avatar
 
Join Date: Sep 2010
Location: Utah
Posts: 2,699
Default

Is that a bracket sitting at the base of the cylinder to the left of the screws?

Other than bagging the parts and going to your dealer about the only other thing you can do is look at the IPBs for the areas over and around the cylinders. One way you can do this is to go the the victory motorcycle website, click on parts and bring up your year/model. Another way is to go to a victory dealer website that has a OEM parts link (I use don wood victory) and bring up your year/model.

Retired USAF, IYAAYAS!

2008 V-Star 1100 Custom Bobber project

2011 Crimson XR with Forged Highway Bars / Hard Bags / Passenger Backrest, Ness parts including Smooth Layback Plate Frame/Mount / Rad 3 Mirror / deep cut grips / drivers floorboards /shifter peg / brake peg / passenger pegs. Witchdoctor black rack, Lloydz filter / timing wheel / VFC III, 7Jurock windshield, Drag Specialties seat.
ammo_umb is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Victory Forums - Victory Motorcycle Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools Search this Thread
Show Printable Version Show Printable Version
Email this Page Email this Page
Search this Thread:

Advanced Search
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome