if you just want the rear wheel off the ground...I use a half inch thick piece of hard wood scrap board under the center stand to "lift" the rear wheel up enough to rotate the rear wheel while cleaning or to rotate it enuff to locate the stem for checking tire pressure. It is harder to roll off, but is a simple solution in limited space.
MSgt Ret. Security Forces USAF/Santa Maria, CA
2011 Victory Cross Country (Imp Blue)
-Mods-Vic Military Salute Wedge Covers/Madstad with stock shield/Floor Board Hwy Pegs/2012 Hard Lowers/Hard Bag Bars/adj. pass. foot rests/+2 SRVT Pull Back Bars/Mirror extenders/LED driving lights/WOLO horn/RicZ laid down plate bracket/Kuryakyn Brake Pedal/Signal Dynamics headlight modulator/Custom Dynamics Brake light Strobe/LED rear plate/1/4 turn throttle ring/Lloydz timing wheel +4