Ceramic Balancing Beads - Victory Forums - Victory Motorcycle Forum
 
LinkBack Thread Tools Search this Thread Display Modes
post #1 of 4 (permalink) Old 05-13-2010, 07:54 AM Thread Starter
Senior Member
 
Join Date: Dec 2009
Location: Pittsburgh, PA
Posts: 163
Default Ceramic Balancing Beads

Has anyone else tried the Dyna Balancing Bead? I have had them in for a month or so and at first didn't notice anything. Just recently I noticed that when I pull out from a stop and make a hard turn I get a vibration, at first I thought it was the belt out of alignment or something then I remembered the "Beads". I think it's the fat 250 tire and when you start out and turn hard they must go to one side and stick there a bit. They eventually smooth out. I have no problems with the front tire.

In case you are unfimilair with balancing beads:
they are a high-density ceramic bead that, when easily installed, continuously balances your tires as you drive. The amount of material will distribute itself in weight and position dependent on the balance requirements of the individual tire.

I was able to remove the ugly weights from my chrome rims and they are suposed to balance so well you can see 10% more miles out of your tires.

Glass smooth ride, every time, all the time.
Dramatically longer tire life
No rebalancing
No spoke or rim weights
Eliminates tire cupping.
Easy to install
Your motorcycle dealer won't want to do it the old way once he's tried Dyna Beads!

2007 Jackpot Premium
HID Headlight
Swept Exhaust
Torque Tubes
Monster Baffles
Power Commander

Too much chrome and add ons to list.

:soapbox:Ban "TAR AND CHIP"
MSchneid is offline  
Sponsored Links
Advertisement
 
post #2 of 4 (permalink) Old 05-13-2010, 09:25 AM
Lifetime Premium
 
NOEMTZ's Avatar
 
Join Date: Jul 2009
Location: TEXAS
Posts: 1,568
Garage
Default

Quote:
Originally Posted by MSchneid View Post
Has anyone else tried the Dyna Balancing Bead? I have had them in for a month or so and at first didn't notice anything. Just recently I noticed that when I pull out from a stop and make a hard turn I get a vibration, at first I thought it was the belt out of alignment or something then I remembered the "Beads". I think it's the fat 250 tire and when you start out and turn hard they must go to one side and stick there a bit. They eventually smooth out. I have no problems with the front tire.

In case you are unfimilair with balancing beads:
they are a high-density ceramic bead that, when easily installed, continuously balances your tires as you drive. The amount of material will distribute itself in weight and position dependent on the balance requirements of the individual tire.

I was able to remove the ugly weights from my chrome rims and they are suposed to balance so well you can see 10% more miles out of your tires.

Glass smooth ride, every time, all the time.
Dramatically longer tire life
No rebalancing
No spoke or rim weights
Eliminates tire cupping.
Easy to install
Your motorcycle dealer won't want to do it the old way once he's tried Dyna Beads!
Have never heard of that problem with dyna beads....
Did you install them on used tires or new? If used, then maybe tires had already had some signs of cupping or uneven wear.
Make sure your air pressures are correct.

What year is your bike, how many miles on it. Ever think of possible bearing problem?
Those are just some thoughts....trying to diagnose your issue.

www.noemtz.com
Parts & Accessories, Grips, Pegs,Tail Lights, Clear Signal Lenses, Clutch Cable Repair Kits, Custom Tank Badges, Brake Pads, Led Conversions and installation, 12 Volt Adaptors, Chrome, Dyna Beads Wheel Balancing, Heel Blades, Kickstand extensions and much more!

"I Would Rather Die On My Feet, Than Live On My Knees...Emiliano Zapata - 1910"
“I DON’T PICK SIDES, GO WITH THE FLOW, OR PUT UP WITH BULLSHIT.
I RELY SOLELY ON MYSELF, BEAUSE I HAVE MY OWN BACK. NOEMTZ - 2010”
NOEMTZ is offline  
post #3 of 4 (permalink) Old 05-13-2010, 10:43 AM Thread Starter
Senior Member
 
Join Date: Dec 2009
Location: Pittsburgh, PA
Posts: 163
Default

My bike is a 2007 with 300 miles.

2007 Jackpot Premium
HID Headlight
Swept Exhaust
Torque Tubes
Monster Baffles
Power Commander

Too much chrome and add ons to list.

:soapbox:Ban "TAR AND CHIP"
MSchneid is offline  
Sponsored Links
Advertisement
 
post #4 of 4 (permalink) Old 05-13-2010, 01:50 PM
Lifetime Premium
 
NOEMTZ's Avatar
 
Join Date: Jul 2009
Location: TEXAS
Posts: 1,568
Garage
Default

Quote:
Originally Posted by MSchneid View Post
My bike is a 2007 with 300 miles.
I would check air pressures and verify correct amounts of beads in both front and rear based on tire size.
I will run this by the Manufacturer in the meantime.

Keep in mind:
The balancing principle is based on centrifigal force, and enough force is developed to keep the beads in position at approximately 25 - 35 MPH, but the exact speed is dependant upon tire diameter. So with that said, anything below that speed could probably be felt if your tire and wheel are extremely unbalanced. This would be easy to detect if there was a large amount of weights removed at the time of replacing them with the beads.

www.noemtz.com
Parts & Accessories, Grips, Pegs,Tail Lights, Clear Signal Lenses, Clutch Cable Repair Kits, Custom Tank Badges, Brake Pads, Led Conversions and installation, 12 Volt Adaptors, Chrome, Dyna Beads Wheel Balancing, Heel Blades, Kickstand extensions and much more!

"I Would Rather Die On My Feet, Than Live On My Knees...Emiliano Zapata - 1910"
“I DON’T PICK SIDES, GO WITH THE FLOW, OR PUT UP WITH BULLSHIT.
I RELY SOLELY ON MYSELF, BEAUSE I HAVE MY OWN BACK. NOEMTZ - 2010”

Last edited by NOEMTZ; 05-13-2010 at 02:00 PM.
NOEMTZ is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Victory Forums - Victory Motorcycle Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools Search this Thread
Show Printable Version Show Printable Version
Email this Page Email this Page
Search this Thread:

Advanced Search
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome