a couple of videos of my Victory ride - Victory Forums - Victory Motorcycle Forum
 
LinkBack Thread Tools Search this Thread Display Modes
post #1 of 9 (permalink) Old 02-19-2014, 11:57 AM Thread Starter
Lifetime Premium
 
Motorbikerx's Avatar
 
Join Date: Dec 2013
Location: Gold Coast, Australia.
Posts: 8,668
Garage
Default a couple of videos of my Victory ride

the ride from Woodenbong towards Rathdowney border gates and back is a great road with some nice in camber corners.
sorry about the wind noise but it was just recorded on a normal camera hand held by the lady on the back,
apart from the wind noise there's some good sounds coming from the exhaust and the occasional scraping of the exhaust pipe on r/h bends.
Enjoy



Victory Vegas 2010
Lloydz 109"cube big bore
" " 495 cams
" " TorqueTubes
" " timing wheel @4 deg.
" " Primary plate
" " IAV
RPW Slash pipes
PCV
Progressive 465 rear shock
Kingpin USD Forks
18" XC front wheel
1 3/4" 'Burleigh Bars'
Stebel air horn
12.106 @110.90mph
114/123

Victory Cross Country 2010 (106)
Lloyds air filter
" " VM1 Cams
Home gutted exhaust
Maximus
Both tuned by [email protected] Dyno
110/116

Gold Coast
Australia
Motorbikerx is offline  
Sponsored Links
Advertisement
 
post #2 of 9 (permalink) Old 02-19-2014, 12:05 PM
Senior Member
 
Judge Redd's Avatar
 
Join Date: Nov 2013
Location: Hanover, VA
Posts: 778
Garage
Default

Nice road! Curvy roads in Richmond area are .. not so much.. much better in the western mountains though. ..

2014 Judge(Havasu Red) PC-V - ATS(+4) - RPW Boom Sticks - HOHVM1-DR cams - Torque Tubes (dyno sheet) 1/4 turn throttle - OPT7 LED headlight kit - OEM bags, backrest, and W/S
Judge Redd is offline  
post #3 of 9 (permalink) Old 02-19-2014, 12:37 PM
Senior Member
 
visionjohnny's Avatar
 
Join Date: Sep 2010
Location: minnesota
Posts: 12,949
Default

Who ever was in back filming did a Great job

2008 Vision
Mpls, MN.

Please add your state and model of bike you have. Click user CP @ top of page and then far left click edit signature. Thanks
visionjohnny is offline  
Sponsored Links
Advertisement
 
post #4 of 9 (permalink) Old 02-19-2014, 03:47 PM
Lifetime Premium
 
Krisd's Avatar
 
Join Date: Dec 2013
Location: Sydney, Australia
Posts: 1,367
Default

Nice Chris- where abouts is that exactly?

Those Burleigh bars look really nice- from your position does it block your view of the speedo or warning lights? I might give them a call and see if they do them in black.

2012 Hammer S
Freedom Performance pipes now wrapped, PCV, Loyds air filter, ATS, Loyds Cams and 1/4 Turn Throttle adj, Progressive rear shock
300mm rear and 23" front
Krisd is offline  
post #5 of 9 (permalink) Old 02-19-2014, 06:20 PM Thread Starter
Lifetime Premium
 
Motorbikerx's Avatar
 
Join Date: Dec 2013
Location: Gold Coast, Australia.
Posts: 8,668
Garage
Smile

Quote:
Originally Posted by Krisd View Post
Nice Chris- where abouts is that exactly?

Those Burleigh bars look really nice- from your position does it block your view of the speedo or warning lights? I might give them a call and see if they do them in black.
Yeah mate they do a great job of blocking the too bright overdrive light and the too bright hi beam indicator ive put a lower power globe in abd stuck a pocket watch over most of it as bright dash lights at night specially in rain annoy the fark outta me.
Bars are tough hey. Give great "feel".
Are available in powdercoated black. Mine are called rollerbars and designed to be in exact position as stock but easier on wrists, thats the way I wanted em. And the cables all just reach...had to reroute clutchcable behind top triple clamp and pull front brake hose back thru a tad but all fitted.
Tell Dave Kurtso ya heard about em from me, hes a big Victory fan put me onto en actually. Hes Victory mad..like the rest of us!
Check out their website on the net.
And yeah my camera lady dida great job, shes fearless and does lots of other stuff great too!

Victory Vegas 2010
Lloydz 109"cube big bore
" " 495 cams
" " TorqueTubes
" " timing wheel @4 deg.
" " Primary plate
" " IAV
RPW Slash pipes
PCV
Progressive 465 rear shock
Kingpin USD Forks
18" XC front wheel
1 3/4" 'Burleigh Bars'
Stebel air horn
12.106 @110.90mph
114/123

Victory Cross Country 2010 (106)
Lloyds air filter
" " VM1 Cams
Home gutted exhaust
Maximus
Both tuned by [email protected] Dyno
110/116

Gold Coast
Australia
Motorbikerx is offline  
post #6 of 9 (permalink) Old 02-19-2014, 06:28 PM Thread Starter
Lifetime Premium
 
Motorbikerx's Avatar
 
Join Date: Dec 2013
Location: Gold Coast, Australia.
Posts: 8,668
Garage
Default

pist
Quote:
Originally Posted by Krisd View Post
Nice Chris- where abouts is that exactly?

Those Burleigh bars look really nice- from your position does it block your view of the speedo or warning lights? I might give them a call and see if they do them in black.
Also from my Vegas seating and how I sit thr useless part of Speedo and tach are blocked, had just a central Speedo when we measured up but who needs to see under 20 ks or over 6 grand?

You can run yr wiring inside em too theyre predrilled just a bit of stuffing around to extend the wires a bit, I may do that later.
Ya need to die grind the locating post off yr switchblock too but ya dontneed em theyre just mass prod assembly markers.
A tuff bike needs tuff bars!

Victory Vegas 2010
Lloydz 109"cube big bore
" " 495 cams
" " TorqueTubes
" " timing wheel @4 deg.
" " Primary plate
" " IAV
RPW Slash pipes
PCV
Progressive 465 rear shock
Kingpin USD Forks
18" XC front wheel
1 3/4" 'Burleigh Bars'
Stebel air horn
12.106 @110.90mph
114/123

Victory Cross Country 2010 (106)
Lloyds air filter
" " VM1 Cams
Home gutted exhaust
Maximus
Both tuned by [email protected] Dyno
110/116

Gold Coast
Australia
Motorbikerx is offline  
post #7 of 9 (permalink) Old 02-19-2014, 06:47 PM
Lifetime Premium
 
Krisd's Avatar
 
Join Date: Dec 2013
Location: Sydney, Australia
Posts: 1,367
Default

Quote:
Originally Posted by Motorbikerx View Post
Yeah mate they do a great job of blocking the too bright overdrive light and the too bright hi beam indicator ive put a lower power globe in abd stuck a pocket watch over most of it as bright dash lights at night specially in rain annoy the fark outta me.
Bars are tough hey. Give great "feel".
Are available in powdercoated black. Mine are called rollerbars and designed to be in exact position as stock but easier on wrists, thats the way I wanted em. And the cables all just reach...had to reroute clutchcable behind top triple clamp and pull front brake hose back thru a tad but all fitted.
Tell Dave Kurtso ya heard about em from me, hes a big Victory fan put me onto en actually. Hes Victory mad..like the rest of us!
Check out their website on the net.
And yeah my camera lady dida great job, shes fearless and does lots of other stuff great too!
Yeah I like them a lot- also internal wiring a big plus- cool, thanks mate.

Quote:
Originally Posted by Motorbikerx View Post
pist

Also from my Vegas seating and how I sit thr useless part of Speedo and tach are blocked, had just a central Speedo when we measured up but who needs to see under 20 ks or over 6 grand?

You can run yr wiring inside em too theyre predrilled just a bit of stuffing around to extend the wires a bit, I may do that later.
Ya need to die grind the locating post off yr switchblock too but ya dontneed em theyre just mass prod assembly markers.
A tuff bike needs tuff bars!
Haha....nice mate- thanks.

2012 Hammer S
Freedom Performance pipes now wrapped, PCV, Loyds air filter, ATS, Loyds Cams and 1/4 Turn Throttle adj, Progressive rear shock
300mm rear and 23" front
Krisd is offline  
post #8 of 9 (permalink) Old 02-19-2014, 10:07 PM
Senior Member
 
Term's Avatar
 
Join Date: Sep 2012
Location: Georgia
Posts: 539
Default

Looks like some really nice roads and a nice day to ride. I only watched the first one, my internet is crap and it took too long to get the first one completely loaded.

You should really try to stay on your side though, your lucky no other cars came along.


2013 Vision Sunset Red - Stage 1 exhaust, VictoryHID Cyclops
2004 Kingpin - Traded
Term is offline  
post #9 of 9 (permalink) Old 03-01-2015, 07:49 AM Thread Starter
Lifetime Premium
 
Motorbikerx's Avatar
 
Join Date: Dec 2013
Location: Gold Coast, Australia.
Posts: 8,668
Garage
Default

here's the same bit of road, very well videotaped aboard a bike a little quicker and a tad more nimble than my humble Vegas
the Yamaha R1
Enjoy
http://youtu.be/Pw3_OlAd-lU

Victory Vegas 2010
Lloydz 109"cube big bore
" " 495 cams
" " TorqueTubes
" " timing wheel @4 deg.
" " Primary plate
" " IAV
RPW Slash pipes
PCV
Progressive 465 rear shock
Kingpin USD Forks
18" XC front wheel
1 3/4" 'Burleigh Bars'
Stebel air horn
12.106 @110.90mph
114/123

Victory Cross Country 2010 (106)
Lloyds air filter
" " VM1 Cams
Home gutted exhaust
Maximus
Both tuned by [email protected] Dyno
110/116

Gold Coast
Australia
Motorbikerx is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Victory Forums - Victory Motorcycle Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools Search this Thread
Show Printable Version Show Printable Version
Email this Page Email this Page
Search this Thread:

Advanced Search
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome