Avon Grips - Victory Forums - Victory Motorcycle Forum
 
LinkBack Thread Tools Search this Thread Display Modes
post #1 of 8 (permalink) Old 07-27-2012, 09:17 PM Thread Starter
Senior Member
 
Join Date: May 2012
Location: san antonio, texas
Posts: 124
Default Avon Grips

getting ready to install New Avons. does anyone have experience installing them? does the B cam work for Victory? Any tricks to disemblimg the throttle body? Any tidbits may help.

2011 XRoads Black
marconewt is offline  
Sponsored Links
Advertisement
 
post #2 of 8 (permalink) Old 07-27-2012, 11:27 PM
Lifetime Premium
 
BBob's Avatar
 
Join Date: Aug 2010
Location: NW AZ
Posts: 12,914
Garage
BBob is offline  
post #3 of 8 (permalink) Old 07-28-2012, 12:13 AM
Lifetime Premium
 
NOEMTZ's Avatar
 
Join Date: Jul 2009
Location: TEXAS
Posts: 1,567
Garage
Default

Quote:
Originally Posted by marconewt View Post
getting ready to install New Avons. does anyone have experience installing them? does the B cam work for Victory? Any tricks to disemblimg the throttle body? Any tidbits may help.
The cam with the two round holes is used. Before attaching it permanently...Make sure that the edge of the cam is completely flush with grip tube. If not, flip it over. If you attach backwards, it will bind up in switch housing.

www.noemtz.com
Parts & Accessories, Grips, Pegs,Tail Lights, Clear Signal Lenses, Clutch Cable Repair Kits, Custom Tank Badges, Brake Pads, Led Conversions and installation, 12 Volt Adaptors, Chrome, Dyna Beads Wheel Balancing, Heel Blades, Kickstand extensions and much more!

"I Would Rather Die On My Feet, Than Live On My Knees...Emiliano Zapata - 1910"
I DONT PICK SIDES, GO WITH THE FLOW, OR PUT UP WITH BULLSHIT.
I RELY SOLELY ON MYSELF, BEAUSE I HAVE MY OWN BACK. NOEMTZ - 2010
NOEMTZ is offline  
Sponsored Links
Advertisement
 
post #4 of 8 (permalink) Old 07-28-2012, 11:23 AM
Senior Member
 
visionjohnny's Avatar
 
Join Date: Sep 2010
Location: minnesota
Posts: 12,949
Default

Quote:
Originally Posted by marconewt View Post
getting ready to install New Avons. does anyone have experience installing them? does the B cam work for Victory? Any tricks to disemblimg the throttle body? Any tidbits may help.
What are you asking????
Are you putting on normal handlebar grips??
What is B cam ??
What does the throttle body have to do with it????

If your doing handle bar grips loosen locking nuts up at the grip un doing housing and pull cables of and put on new grips. Take play out of cable but not to much.

Take knife and cut clutch grip and peal off.

But the way you want grips that will fit a harley 1999 to 2008
I strongly suggest you do a search here for service manual and down load it to your computer.

2008 Vision
Mpls, MN.

Please add your state and model of bike you have. Click user CP @ top of page and then far left click edit signature. Thanks
visionjohnny is offline  
post #5 of 8 (permalink) Old 07-28-2012, 11:42 AM
Lifetime Premium
 
NOEMTZ's Avatar
 
Join Date: Jul 2009
Location: TEXAS
Posts: 1,567
Garage
Default

Quote:
Originally Posted by visionjohnny View Post
What are you asking????
Are you putting on normal handlebar grips??
What is B cam ??
What does the throttle body have to do with it????

If your doing handle bar grips loosen locking nuts up at the grip un doing housing and pull cables of and put on new grips. Take play out of cable but not to much.

Take knife and cut clutch grip and peal off.

But the way you want grips that will fit a harley 1999 to 2008
I strongly suggest you do a search here for service manual and down load it to your computer.
Avons come with various cams for different bikes. Once cam is selected, it is attached to throttle tube using supplied Avon version of what I call super glue or epoxy. Once glued...there is no turning back...will no longer come apart...trust me i have tried.

Throttle body has nothing to do with it.

Throttle cables are inside right hand switch housing.

Left grip has to be peeled off due to being glued on to bar.

Left Avon grip gets glued on using supplied adhesive and secured with set screws on some grip models.

www.noemtz.com
Parts & Accessories, Grips, Pegs,Tail Lights, Clear Signal Lenses, Clutch Cable Repair Kits, Custom Tank Badges, Brake Pads, Led Conversions and installation, 12 Volt Adaptors, Chrome, Dyna Beads Wheel Balancing, Heel Blades, Kickstand extensions and much more!

"I Would Rather Die On My Feet, Than Live On My Knees...Emiliano Zapata - 1910"
I DONT PICK SIDES, GO WITH THE FLOW, OR PUT UP WITH BULLSHIT.
I RELY SOLELY ON MYSELF, BEAUSE I HAVE MY OWN BACK. NOEMTZ - 2010
NOEMTZ is offline  
post #6 of 8 (permalink) Old 07-28-2012, 09:26 PM Thread Starter
Senior Member
 
Join Date: May 2012
Location: san antonio, texas
Posts: 124
Default grips

Quote:
Originally Posted by NOEMTZ View Post
The cam with the two round holes is used. Before attaching it permanently...Make sure that the edge of the cam is completely flush with grip tube. If not, flip it over. If you attach backwards, it will bind up in switch housing.

U Da Man Noe!! Just put them on and u are correct using the B cam. Wasnt to bad an install!! Mark

2011 XRoads Black
marconewt is offline  
post #7 of 8 (permalink) Old 07-29-2012, 10:34 AM
Lifetime Premium
 
NOEMTZ's Avatar
 
Join Date: Jul 2009
Location: TEXAS
Posts: 1,567
Garage
Default

Glad I could help! Post up pics of them on your ride!

www.noemtz.com
Parts & Accessories, Grips, Pegs,Tail Lights, Clear Signal Lenses, Clutch Cable Repair Kits, Custom Tank Badges, Brake Pads, Led Conversions and installation, 12 Volt Adaptors, Chrome, Dyna Beads Wheel Balancing, Heel Blades, Kickstand extensions and much more!

"I Would Rather Die On My Feet, Than Live On My Knees...Emiliano Zapata - 1910"
I DONT PICK SIDES, GO WITH THE FLOW, OR PUT UP WITH BULLSHIT.
I RELY SOLELY ON MYSELF, BEAUSE I HAVE MY OWN BACK. NOEMTZ - 2010
NOEMTZ is offline  
post #8 of 8 (permalink) Old 07-29-2012, 02:27 PM Thread Starter
Senior Member
 
Join Date: May 2012
Location: san antonio, texas
Posts: 124
Default

Quote:
Originally Posted by NOEMTZ View Post
The cam with the two round holes is used. Before attaching it permanently...Make sure that the edge of the cam is completely flush with grip tube. If not, flip it over. If you attach backwards, it will bind up in switch housing.
Quote:
Originally Posted by NOEMTZ View Post
Glad I could help! Post up pics of them on your ride!
...excellent idea, let me see if i can figure out how to upload a pic to these messages. mjo

2011 XRoads Black
marconewt is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Victory Forums - Victory Motorcycle Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools Search this Thread
Show Printable Version Show Printable Version
Email this Page Email this Page
Search this Thread:

Advanced Search
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome