LED rear signals as well fromt - Victory Forums - Victory Motorcycle Forum
Reply
 
LinkBack Thread Tools Search this Thread Display Modes
post #1 of 15 (permalink) Old 05-06-2015, 10:54 PM Thread Starter
Junior Member
 
Join Date: Mar 2015
Posts: 12
Default LED rear signals as well fromt

were should I buy them from . MBD , e bay , which doctors any input would be great .....
Sheman is offline  
Sponsored Links
Advertisement
 
post #2 of 15 (permalink) Old 05-07-2015, 04:46 AM
Senior Member
 
BlueVegas's Avatar
 
Join Date: May 2014
Posts: 132
Default

The eBay stuff is garbage check out these:

http://www.hightechspeed.com

Have them on my Vegas and just put a set on my buddies Hammer. Mike at High Tech is a great guy
BlueVegas is offline  
post #3 of 15 (permalink) Old 05-07-2015, 05:07 AM
Lifetime Premium
 
BP6666VR's Avatar
 
Join Date: Dec 2013
Location: World Citizen = A peaceful and peacemaking individual, both in daily life and contacts with others
Posts: 5,951
Default

That is nice looking stuff mate

JACKPOT 2013 orange MADNESS :-) *HOH-VM1-DR*TachoMeter*PowCom-5*AutoTune*ATS*TorTube & (IAC) & nitro*Swept exhaust*LYNDALL & EBC brakes Front & Rear*Stainless Beads*Fwd Contr 4" *2 x Bad Boy Air Horn*Seven Color Lizard*NGK plugs*Blue Spark Plug Wir*Victory Oil*KN Oil filter*Oil Analysis*Clutch Cover*Kickst Repl Rubb*Invisble-A-Key*L.E.D. Batt. Gauge*Pulsating Brake Light*VictoryHID*Lice Bracket OVAL*BoltKit-Chrome*

Cross Country Tour 2014 [B]
BP6666VR is offline  
Sponsored Links
Advertisement
 
post #4 of 15 (permalink) Old 05-07-2015, 07:14 AM
Senior Member
 
blueracer17's Avatar
 
Join Date: Mar 2014
Location: Central Wisconsin
Posts: 190
Default

Quote:
Originally Posted by BP6666VR View Post
That is nice looking stuff mate
Their prices don't look too bad either. I saw Made in USA and figured they would be very expensive, but they aren't. Too bad I already have Kuryakyn turn signals up front.

2004 Kingpin
Mustang Seat, Progressive 465 shock, RPW Thor Exhaust, VFC III, S&S Intake, Ness Fly bars, Kuryakyn ISO Grips and throttle boss, Kuryakyn Silver Bullets, Ness laydown plate bracket, Barnett braided clutch cable....
blueracer17 is offline  
post #5 of 15 (permalink) Old 05-07-2015, 12:11 PM
Junior Member
 
Alberta Vegas's Avatar
 
Join Date: Apr 2014
Location: Fort Mcmurray, Alberta
Posts: 25
Default

Check out custom dynamics at http://www.customdynamics.com. They make some nice LED products.

2014 Vegas 8 Ball
Memphis shades batwing fairing
Hacker Rippers
AMS
K and N Air Filter
Alberta Vegas is offline  
post #6 of 15 (permalink) Old 05-13-2015, 06:34 AM
Lifetime Premium
 
SMTCapeCod's Avatar
 
Join Date: Sep 2013
Posts: 142
Default and for a *little* tech.....

Did your install require resistors?

2006 Vingpin, Inverted forks, Progressive rear shock, Stage 1 slip-on kit, S+S intake, grips and pegs, tach and rack, corbin saddle, night dragons. KMC reflashed/retuned to 100HP/104 TQ, good'nuff.

2014 BMW 650i Xdrive
2005 Grand Cherokee Ltd 5.7L Hemi, Konis, SRT swaybars, BB
1986 Porsche 928S, slightly enhanced.
SMTCapeCod is offline  
post #7 of 15 (permalink) Old 05-13-2015, 07:33 AM
Member
 
Join Date: Apr 2015
Posts: 41
Default

Quote:
Originally Posted by SMTCapeCod View Post
Did your install require resistors?

FYI, If you are running front Bulbs and read LED's you need 20ohm 10 watt resistors. If you are running LED's front and rear you need 10 ohm 20 watt resistors.
Zero Cool is offline  
post #8 of 15 (permalink) Old 05-13-2015, 09:20 AM
Senior Member
 
blueracer17's Avatar
 
Join Date: Mar 2014
Location: Central Wisconsin
Posts: 190
Default

I have LEDs up front and stock in the rear of my KP and installed this adjustable flasher. It works great. Plug and play.
https://tstindustries.com/LED-Flasher-Relay-Gen2.html

2004 Kingpin
Mustang Seat, Progressive 465 shock, RPW Thor Exhaust, VFC III, S&S Intake, Ness Fly bars, Kuryakyn ISO Grips and throttle boss, Kuryakyn Silver Bullets, Ness laydown plate bracket, Barnett braided clutch cable....
blueracer17 is offline  
post #9 of 15 (permalink) Old 05-13-2015, 08:57 PM
Senior Member
 
ChiTownVegas's Avatar
 
Join Date: Mar 2012
Posts: 329
Default

Quote:
Originally Posted by Zero Cool View Post
FYI, If you are running front Bulbs and read LED's you need 20ohm 10 watt resistors. If you are running LED's front and rear you need 10 ohm 20 watt resistors.
Check with the MFG before going in and soldering resistors in. Most non-fleabay signals have them built in already. Mine went in without any mods

2012 Vegas 8 Ball
LLoydz VM1 drop in cams
LLoydz Adjustable Timing Wheel
LLoydz 1/4 turn throttle ring
RPW Slash Exhaust
S&S Intake
PCV w/AutoTune
Barnett clutch
Pirelli Night Dragon rubber
ChiTownVegas is offline  
post #10 of 15 (permalink) Old 05-14-2015, 04:50 AM
Senior Member
 
DirtyDan's Avatar
 
Join Date: Aug 2013
Location: San Tan Valley, AZ
Posts: 1,501
Default

Quote:
Originally Posted by BlueVegas View Post
The eBay stuff is garbage check out these:

http://www.hightechspeed.com

Have them on my Vegas and just put a set on my buddies Hammer. Mike at High Tech is a great guy
Not ALL ebay stuff is garbage. Just pay attention to what and who you're buying from.

2012 Cross Country Champion Trike in process with all the usual mods
2010 cross country, engine change out in process
All sold
2012 XCT,
03/07/12 RG Chopped Bagger
1996 Road King Chopped
2003 FLHTCUI
2003 Big Bear Choppers DA
2000 Chopper Guys rigid EVO
1995 FLHTCU w/Hennigan sidecar
1947 Knuckle
1990 FXRS Convt
1986 Honda CX650C
DirtyDan is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Victory Forums - Victory Motorcycle Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools Search this Thread
Show Printable Version Show Printable Version
Email this Page Email this Page
Search this Thread:

Advanced Search
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome