Are you referring to sending a 1-1/8" hole saw up the pipe?
2010 Midnight Cherry XR. 7Jurock, Lloydz AF, ATS, AFR tuned VFCIII, IAV, and T-6 and locally repacked pipes = big smiles. SOLD to a dear friend, so it's still in the family."
2017 Spyder F3 Limited - keeps this old guy in the wind and riding with friends.
Cure that ugly stand up license plate with the cheapest and best laydown bracket. Click this: https://www.victoryforums.com/11-ven...t-x-bikes.html
This may help, Its for the glasspack mod but should give you an idea of how to do it. Just cut the end with the exhaust tip off and weld it back together after removing the baffle (carefull to align the brackets in the correct place). You can either leave the exhaust pipe stock or cut it and weld a wider diameter like Dustin did
14' Cross Country
~PCV, Timing Wheel +6, Thrush Mod Exhaust, Madstad 11" windshield
If your friend is ever in the Wichita area, I have a set of debaffled mufflers that were on the bike when I laid her down. The heat shields are fubar but the mufflers are still good. Not asking anything, just want them out of the garage.