Need Help asap please - Victory Forums - Victory Motorcycle Forum
 
LinkBack Thread Tools Search this Thread Display Modes
post #1 of 5 (permalink) Old 06-14-2015, 01:59 PM Thread Starter
Member
 
steveg56's Avatar
 
Join Date: Oct 2012
Posts: 91
Default Need Help asap please

So I installed my AT-300 last night everything liked up and checked out. Took the bike for the initial run this morning. Bike was running amazingly well and super strong in all areas of the RPM's. About 30 miles or so into the ride, It started to spudder a bit and continued to spudder and got worse as time went on. First thing I thought was I did not tighten down the new wide band O2 sensors and they backed off. Checked um and they seem fine. Anyone have any ideas? possible ground or 12v connector?

2015 Magnum X1, AF, PTS, Vance and Hines Hi Outputs, PCV, AT-300
steveg56 is offline  
Sponsored Links
Advertisement
 
post #2 of 5 (permalink) Old 06-14-2015, 02:13 PM Thread Starter
Member
 
steveg56's Avatar
 
Join Date: Oct 2012
Posts: 91
Default

All connections look good...ground solid...Hmmm

2015 Magnum X1, AF, PTS, Vance and Hines Hi Outputs, PCV, AT-300
steveg56 is offline  
post #3 of 5 (permalink) Old 06-14-2015, 06:18 PM
Senior Member
 
visionjohnny's Avatar
 
Join Date: Sep 2010
Location: minnesota
Posts: 12,947
Default

maybe the 300 is no go.
what are your other setting

2008 Vision
Mpls, MN.

Please add your state and model of bike you have. Click user CP @ top of page and then far left click edit signature. Thanks
visionjohnny is offline  
Sponsored Links
Advertisement
 
post #4 of 5 (permalink) Old 06-14-2015, 07:06 PM Thread Starter
Member
 
steveg56's Avatar
 
Join Date: Oct 2012
Posts: 91
Default

Got it working...tapped power or ground was a bit loose. Tightened both of those and working like a champ again. Best $350 you can spend on your bike. Guy's canned maps are ok at best. My bike runs so much stronger with so much more pull now that it's tuned. I imagine a Dyno tune vs. canned map would be the same result. So if you don't want the hassle of installing the auto tuner and are just running a canned map, at least get it dyno'd. You will be glad you did. No more popping, stalling, flaming out...this is the way a bike should run!

I bought the Auto tuner because I plan on getting cams and did not want to pay the price for two dyno's at $400 a piece. So glad I did.

2015 Magnum X1, AF, PTS, Vance and Hines Hi Outputs, PCV, AT-300
steveg56 is offline  
post #5 of 5 (permalink) Old 06-16-2015, 03:12 PM
Lifetime Premium
 
p.hunt's Avatar
 
Join Date: Jul 2013
Location: Roseburg Oregon
Posts: 458
Default

Nice how did you determine where to set your afr table?

2012 Vision - in process of converting to Cross Country rear end and bags
Lloyd's -Filter-Timing wheel-Adjustable Intake-Throttle ring
PCV5
Home built 2 into 1 pipe with dummy pipe on left looks stock
p.hunt is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Victory Forums - Victory Motorcycle Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools Search this Thread
Show Printable Version Show Printable Version
Email this Page Email this Page
Search this Thread:

Advanced Search
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome