PC3 Hammer download Maps - Victory Forums - Victory Motorcycle Forum
 
LinkBack Thread Tools Search this Thread Display Modes
post #1 of 10 (permalink) Old 07-29-2015, 11:00 PM Thread Starter
Member
 
Join Date: Jul 2015
Location: Ft Collins, CO
Posts: 43
Default PC3 Hammer download Maps

Does anyone know if the PC3 "2005 Victory Hammer Stage 1 kit" and "Victory Stage 1 drag pipes, S&S air box" maps are supposed to be comparable to the dealer Stage 1 re-flash maps?

I'm trying to find a shop around Northern Colorado to do a custom tune for me but they are all primarily Harley shops. When I ask them if they can tune my Victory they either just say "no", or act as if its some huge burden to them and say something like "Yeah, maybe we can get you in around September or something...". Either way, I would like to take it to a shop that I trust will take it seriously.

In the mean time, I'm trying to find a map that will suit my mods reasonably until I can find a place. Any help would be greatly appreciated.

Thanks!

2005 Hammer
Hacker Zoomies
K&N Filter
Geis325i is offline  
Sponsored Links
Advertisement
 
post #2 of 10 (permalink) Old 07-30-2015, 01:22 AM
Lifetime Premium
 
BP6666VR's Avatar
 
Join Date: Dec 2013
Location: World Citizen = A peaceful and peacemaking individual, both in daily life and contacts with others
Posts: 5,950
Default

Hope some forum member has an excellent solution for you ....

BUMB UP

JACKPOT 2013 orange MADNESS :-) *HOH-VM1-DR*TachoMeter*PowCom-5*AutoTune*ATS*TorTube & (IAC) & nitro*Swept exhaust*LYNDALL & EBC brakes Front & Rear*Stainless Beads*Fwd Contr 4" *2 x Bad Boy Air Horn*Seven Color Lizard*NGK plugs*Blue Spark Plug Wir*Victory Oil*KN Oil filter*Oil Analysis*Clutch Cover*Kickst Repl Rubb*Invisble-A-Key*L.E.D. Batt. Gauge*Pulsating Brake Light*VictoryHID*Lice Bracket OVAL*BoltKit-Chrome*

Cross Country Tour 2014 [B]
BP6666VR is offline  
post #3 of 10 (permalink) Old 07-30-2015, 02:10 AM
Lifetime Premium
 
half_crazy's Avatar
 
Join Date: Sep 2011
Location: Southern Maryland
Posts: 4,837
Default

"2005 Victory Hammer Stage 1 kit" is closest to what you have.

2006 Victory Kingpin
Lloydz 116" Stroker/Big Bore, .495 Cams, Torque Tubes Airbox,
RPW Thor Pipe, Lloydz ECU Flash, PC-III, PTS (-2), Rivera
Primo Clutch Spring, 31 Tooth Pulley w/Buell Belt.
half_crazy is offline  
Sponsored Links
Advertisement
 
post #4 of 10 (permalink) Old 07-30-2015, 06:07 AM
Member
 
Join Date: Jun 2015
Posts: 57
Default

I would guess the tune for the S&S airbox and drag pipes has more fuel put into it than the 2005 stage 1 flash. The S&S airbox really opens these bikes up and allows them to breath and pull hard to almost 6,000rpms. I have the PC3 but have yet to install it because i have the 2007 stage 1 flash on my Hammer. Our TPS sensors all vary slightly and everyone says you have to dyno tune your bike to get it right. One question i have with the PC3 is can you download your current tune off your ecm to your PC3? I would like to download my current stage 1 flash and add some fuel to it

2007 Hammer
S&S Intake
Lloydz Timing Wheel
Victory Stage 1 Drag Pipes
Cincinnati, OH
OhioPatriot308 is offline  
post #5 of 10 (permalink) Old 07-30-2015, 08:53 AM Thread Starter
Member
 
Join Date: Jul 2015
Location: Ft Collins, CO
Posts: 43
Default

I don't think you can pull the map off of your ECM. I assume that the PC3 has no idea what ECM map is and only adds or reduces the amount of fuel at a given throttle position and RPM. That's why the downloaded maps won't work with stage 1 flashes. I may be wrong.
Geis325i is offline  
post #6 of 10 (permalink) Old 07-30-2015, 09:32 AM
Lifetime Premium
 
half_crazy's Avatar
 
Join Date: Sep 2011
Location: Southern Maryland
Posts: 4,837
Default

The PC-III is a piggy-back unit. It does not interface with the ECU.

2006 Victory Kingpin
Lloydz 116" Stroker/Big Bore, .495 Cams, Torque Tubes Airbox,
RPW Thor Pipe, Lloydz ECU Flash, PC-III, PTS (-2), Rivera
Primo Clutch Spring, 31 Tooth Pulley w/Buell Belt.
half_crazy is offline  
post #7 of 10 (permalink) Old 07-30-2015, 09:58 AM
Member
 
Join Date: Jun 2015
Posts: 57
Default

Wait so if i have the stage 1 flash currently installed what does the PC3 base the +/- fuel curve off of? Are you adding/removing fuel based off the stage 1 flash or the factory tune?

2007 Hammer
S&S Intake
Lloydz Timing Wheel
Victory Stage 1 Drag Pipes
Cincinnati, OH
OhioPatriot308 is offline  
post #8 of 10 (permalink) Old 07-30-2015, 10:42 AM
Senior Member
 
visionjohnny's Avatar
 
Join Date: Sep 2010
Location: minnesota
Posts: 12,947
Default

you have to have your bike flashed back to stock FIRST per Lloydz

Please note that it is ONLY necessary to revert back to a stock download when installing a VFC on 2002-2007 models. It IS NOT necessary on the 2008-later models. The downloads on the 2008-later models are lean enough that it does not drastically affect the tuning of the VFC.

2008 Vision
Mpls, MN.

Please add your state and model of bike you have. Click user CP @ top of page and then far left click edit signature. Thanks
visionjohnny is offline  
post #9 of 10 (permalink) Old 07-30-2015, 10:52 AM Thread Starter
Member
 
Join Date: Jul 2015
Location: Ft Collins, CO
Posts: 43
Default

Quote:
Originally Posted by OhioPatriot308 View Post
Wait so if i have the stage 1 flash currently installed what does the PC3 base the +/- fuel curve off of? Are you adding/removing fuel based off the stage 1 flash or the factory tune?
The PC3 +/- fueling is based purely off of throttle position and RPM from what I can gather(possibly timing on advanced maps). If you wanted to experiment with your stage 1 flash, I think you could start with a zero map on the PC3 and make small adjustments from there. Someone correct me if I'm wrong.
Geis325i is offline  
post #10 of 10 (permalink) Old 07-30-2015, 11:19 AM
Member
 
Join Date: Jun 2015
Posts: 57
Default

Quote:
Originally Posted by visionjohnny View Post
you have to have your bike flashed back to stock FIRST per Lloydz

Please note that it is ONLY necessary to revert back to a stock download when installing a VFC on 2002-2007 models. It IS NOT necessary on the 2008-later models. The downloads on the 2008-later models are lean enough that it does not drastically affect the tuning of the VFC.
Ok you're speaking of a VFC. Someone needs to confirm if its the same on a PC3

2007 Hammer
S&S Intake
Lloydz Timing Wheel
Victory Stage 1 Drag Pipes
Cincinnati, OH
OhioPatriot308 is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Victory Forums - Victory Motorcycle Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools Search this Thread
Show Printable Version Show Printable Version
Email this Page Email this Page
Search this Thread:

Advanced Search
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome