Are side covers interchangeable ?? - Victory Forums - Victory Motorcycle Forum
 1Likes
Reply
 
LinkBack Thread Tools Search this Thread Display Modes
post #1 of 20 (permalink) Old 09-21-2017, 02:43 PM Thread Starter
Member
 
Dahammer's Avatar
 
Join Date: Sep 2017
Posts: 96
Default Are side covers interchangeable ??

Guys, as title suggests, I would like to know if you can take the side covers off of another model Victory, let's say like a Kingpin or vegas, and snap them onto a hammer ???

In other words, are the mounts located at exactly the same place to allow the covers to snap into place from one bike to another. ???

My Hammer has the hugger rear fender with a different seat. So the rear original fender mounts are not an issue, since they were cut-off

Thanks.
Attached Images
File Type: jpg Hammer sig.jpg (47.1 KB, 15 views)

2009 Hammer S
Ottawa, Canada
Dahammer is offline  
Sponsored Links
Advertisement
 
post #2 of 20 (permalink) Old 09-21-2017, 06:40 PM
Lifetime Premium
 
half_crazy's Avatar
 
Join Date: Sep 2011
Location: Southern Maryland
Posts: 4,826
Default

Your side covers don't look right... there's a gap...

The best way to know is look up the part numbers... if they are the same, then you're good.

2006 Victory Kingpin
Lloydz 116" Stroker/Big Bore, .495 Cams, Torque Tubes Airbox,
RPW Thor Pipe, Lloydz ECU Flash, PC-III, PTS (-2), Rivera
Primo Clutch Spring, 31 Tooth Pulley w/Buell Belt.
half_crazy is online now  
post #3 of 20 (permalink) Old 09-21-2017, 06:40 PM
Lifetime Premium
 
Motorbikerx's Avatar
 
Join Date: Dec 2013
Location: Gold Coast, Australia.
Posts: 8,626
Garage
Default

good question...I dont know...maybe check part numbers or find a Vegas owner and try swapping

Victory Vegas 2010
Lloydz 109"cube big bore
" " 495 cams
" " TorqueTubes
" " timing wheel @4 deg.
" " Primary plate
" " IAV
RPW Slash pipes
PCV
Progressive 465 rear shock
Kingpin USD Forks
18" XC front wheel
1 3/4" 'Burleigh Bars'
Stebel air horn
12.106 @110.90mph
114/123

Victory Cross Country 2010 (106)
Lloyds air filter
" " VM1 Cams
Home gutted exhaust
Maximus
Both tuned by [email protected] Dyno
110/116

Gold Coast
Australia
Motorbikerx is offline  
Sponsored Links
Advertisement
 
post #4 of 20 (permalink) Old 09-21-2017, 06:42 PM
Lifetime Premium
 
Motorbikerx's Avatar
 
Join Date: Dec 2013
Location: Gold Coast, Australia.
Posts: 8,626
Garage
Default

Quote:
Originally Posted by half_crazy View Post
Your side covers don't look right... there's a gap...

The best way to know is look up the part numbers... if they are the same, then you're good.
Agree, ...certainly dont look right...try raising the back of it...get the front away from the hot zorst

Victory Vegas 2010
Lloydz 109"cube big bore
" " 495 cams
" " TorqueTubes
" " timing wheel @4 deg.
" " Primary plate
" " IAV
RPW Slash pipes
PCV
Progressive 465 rear shock
Kingpin USD Forks
18" XC front wheel
1 3/4" 'Burleigh Bars'
Stebel air horn
12.106 @110.90mph
114/123

Victory Cross Country 2010 (106)
Lloyds air filter
" " VM1 Cams
Home gutted exhaust
Maximus
Both tuned by [email protected] Dyno
110/116

Gold Coast
Australia
Motorbikerx is offline  
post #5 of 20 (permalink) Old 09-21-2017, 06:48 PM Thread Starter
Member
 
Dahammer's Avatar
 
Join Date: Sep 2017
Posts: 96
Default

Quote:
Originally Posted by half_crazy View Post
Your side covers don't look right... there's a gap...

The best way to know is look up the part numbers... if they are the same, then you're good.
I know there' s a gap, hence why I am asking... I guess you mean the part numbers of the mounting bracket. Good idea... Now, I begin to search for the parts diagram. Thanks.

Sent from my E6653 using Tapatalk

2009 Hammer S
Ottawa, Canada
Dahammer is offline  
post #6 of 20 (permalink) Old 09-21-2017, 06:51 PM
Lifetime Premium
 
Motorbikerx's Avatar
 
Join Date: Dec 2013
Location: Gold Coast, Australia.
Posts: 8,626
Garage
Default

Quote:
Originally Posted by Dahammer View Post
I know there' s a gap, hence why I am asking... I guess you mean the part numbers of the mounting bracket. Good idea... Now, I begin to search for the parts diagram. Thanks.

Sent from my E6653 using Tapatalk
the partr numbers of the Sidecovers.
just looked at your other pix and yeah it looks so wrong, raise the back of the sidecover
EDIT...goes downstairs to pop a sidecover and see what you mean

I see ..only the top mount is a fixed part of the frame the others are bolt on...yep search polaris part numbers

Victory Vegas 2010
Lloydz 109"cube big bore
" " 495 cams
" " TorqueTubes
" " timing wheel @4 deg.
" " Primary plate
" " IAV
RPW Slash pipes
PCV
Progressive 465 rear shock
Kingpin USD Forks
18" XC front wheel
1 3/4" 'Burleigh Bars'
Stebel air horn
12.106 @110.90mph
114/123

Victory Cross Country 2010 (106)
Lloyds air filter
" " VM1 Cams
Home gutted exhaust
Maximus
Both tuned by [email protected] Dyno
110/116

Gold Coast
Australia

Last edited by Motorbikerx; 09-21-2017 at 07:10 PM.
Motorbikerx is offline  
post #7 of 20 (permalink) Old 09-21-2017, 06:57 PM Thread Starter
Member
 
Dahammer's Avatar
 
Join Date: Sep 2017
Posts: 96
Default

Quote:
Originally Posted by Motorbikerx View Post
the partr numbers of the Sidecovers.
just looked at your other pix and yeah it looks so wrong, raise the back of the sidecover
EDIT...goes downstairs to pop a sidecover and see what you mean
Thanks.

Sent from my E6653 using Tapatalk

2009 Hammer S
Ottawa, Canada
Dahammer is offline  
post #8 of 20 (permalink) Old 09-21-2017, 07:11 PM Thread Starter
Member
 
Dahammer's Avatar
 
Join Date: Sep 2017
Posts: 96
Default

In the early conquest customs days on their Super bee, they had the same problem. They had that gap too. Then they took I believe, another models sidecover and fixed that problem... See pics...

Sent from my E6653 using Tapatalk

2009 Hammer S
Ottawa, Canada
Dahammer is offline  
post #9 of 20 (permalink) Old 09-21-2017, 07:14 PM
Lifetime Premium
 
Motorbikerx's Avatar
 
Join Date: Dec 2013
Location: Gold Coast, Australia.
Posts: 8,626
Garage
Default

Quote:
Originally Posted by Dahammer View Post
In the early conquest customs days on their Super bee, they had the same problem. They had that gap too. Then they took I believe, another models sidecover and fixed that problem... See pics...

Sent from my E6653 using Tapatalk
sidecover on yellow bike certainly different pic to pic....give em a ring

Victory Vegas 2010
Lloydz 109"cube big bore
" " 495 cams
" " TorqueTubes
" " timing wheel @4 deg.
" " Primary plate
" " IAV
RPW Slash pipes
PCV
Progressive 465 rear shock
Kingpin USD Forks
18" XC front wheel
1 3/4" 'Burleigh Bars'
Stebel air horn
12.106 @110.90mph
114/123

Victory Cross Country 2010 (106)
Lloyds air filter
" " VM1 Cams
Home gutted exhaust
Maximus
Both tuned by [email protected] Dyno
110/116

Gold Coast
Australia
Motorbikerx is offline  
post #10 of 20 (permalink) Old 09-21-2017, 07:26 PM Thread Starter
Member
 
Dahammer's Avatar
 
Join Date: Sep 2017
Posts: 96
Default

Quote:
Originally Posted by Motorbikerx View Post
sidecover on yellow bike certainly different pic to pic....give em a ring
I asked cause I was certain that it was a conquest custom modded hammer... All I was able to get is..." yeah, that's not our kit"...

Sent from my E6653 using Tapatalk

2009 Hammer S
Ottawa, Canada
Dahammer is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Victory Forums - Victory Motorcycle Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools Search this Thread
Show Printable Version Show Printable Version
Email this Page Email this Page
Search this Thread:

Advanced Search
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome