Reverse on a 13 CCT? - Victory Forums - Victory Motorcycle Forum
 1Likes
  • 1 Post By visionjohnny
 
LinkBack Thread Tools Search this Thread Display Modes
post #1 of 6 (permalink) Old 05-29-2019, 03:21 PM Thread Starter
Junior Member
 
katz's Avatar
 
Join Date: Jun 2018
Location: Omaha
Posts: 6
Default Reverse on a 13 CCT?

I'm getting ready for a trip to the Pacific Northwest in late July and have a few questions.
I have an all stock 13 CCT and I'm wanting to know if reverse can be added and if so, what does it take (parts & labor) and a ball park on cost? I'm not real mechanical and have only changed the oil in the bike and a hitch (with assistance). I'm in the Omaha, NE area and I'm not sure which shops to check out if I go with reverse.

Its been suggested that I also have the bike DYNO tuned. I've seen people recommend shops in texas and florida but haven't seen anything locally. One place says they do the tune via remote, but I'm not sure how that's done. I did google motorcycle shops in the area, but then I haven't had much experience other than dealing with the dealership in Lincoln.

Your assistance is appreciated.
Tony

katz - BlueTiger
2013 CCT Blue
2005 Yamaha 1100(?) totaled by son (he was okay)
2000 Yamaha 650 (traded up for bigger bike)
katz is offline  
Sponsored Links
Advertisement
 
post #2 of 6 (permalink) Old 05-29-2019, 05:16 PM
Lifetime Premium
 
BBob's Avatar
 
Join Date: Aug 2010
Location: NW AZ
Posts: 12,761
Garage
Default

How close are you to Des Moines, IA? Rylan Vos at The Vic Shop could fix you up with the dyno tune I think.

https://www.thevicshop.com/contact/

As for the reverse set up, there is such an animal, but I don't think you can buy it from Victory any longer. Accessories were discontinued last year so finding one on ebay, one of the forum parts sale sections, or Facebook will be your best bet. Who knows; maybe Rylan knows someone wanting to sell theirs.
BBob is offline  
post #3 of 6 (permalink) Old 05-29-2019, 08:44 PM
Senior Member
 
Join Date: May 2018
Location: Indianapolis
Posts: 1,023
Default

Reverse kit is a unicorn part now. Rare and so crazy expensive you'll want to hit the gym instead.

Yes, remote tune is possible if you have a PVCX or Maximus. In person tuning is best though.
IndyVictory is offline  
Sponsored Links
Advertisement
 
post #4 of 6 (permalink) Old 05-29-2019, 09:38 PM
Lifetime Premium
 
Join Date: Dec 2009
Location: Chattanooga, TN
Posts: 1,838
Default

If you can find a complete reverse kit expect to pay at least $1800 for it. Plus at least 4 hours to a dealer for the installation. Most dealers have no idea how to install the reverse kit because so few of them ever did it. I sold my used reverse kit last year on the Facebook page in under 12 hours at my full asking price of $1750. In hindsight, I wouldn't mind having it but I also didn't see myself installing it for at least another 35K miles. Removing the exhaust to remove the front pulley cover is by far the most difficult part of the entire job. The rest is a simple installation and plug and play for your CCT. I think I have a pdf of the installation instructions if you find a kit and want to install it yourself. They are nice and they work as designed. They're also prone to needing regular use and lubrication to keep them functioning properly.

All the best,

Mark


www.bikersforchrist.org

The Bible: Read, Apply, Repeat

"That's a beautiful Victory!"
"Thank you."
"Who makes it?"
"No one."

Who turns Victory into defeat? Polaris Industries, that's who.

2012 Pearl White CCT. Lloyds DR cams, Timing Wheel (+4), Air Filter, 1/4 Turn Throttle Ring, PCV, Tri Oval mufflers, Dyno Tune from Rylan Vos - The Vic Shop: 112/113. Bad Ace Billet tank lifts and Raging Cajun Medium Low & Throaty mufflers added well after the Dyno run.

Last edited by Chattanooga Mark; 05-29-2019 at 09:40 PM.
Chattanooga Mark is offline  
post #5 of 6 (permalink) Old 05-30-2019, 12:05 PM
Super Moderator
 
broggyr's Avatar
 
Join Date: Apr 2013
Location: Naugatuck, CT
Posts: 6,306
Garage
Default

I found out that you don't need to remove the exhaust to remove the front pulley cover. You might have to loosen it, but you certainly don't have to take it completely off. I did it myself a few months ago.



2013 XCT, Boardwalk Blue w/ Vicwrapz
S&S Cams, Lloydz filter & ATS +5, PCV, UD pulley, Alto Red Eagle clutch plates
Madstad Windshield, 5000K HID, TriOvals, Memphis Shields wings, Ultimate seat
JVC KD-X35MDT, PBR300X4, Polk DB6502, DaytonAudio ND140-4 rear
HyperLites, LED driving lights, Lloydz dyno 105+H and 117+T
Arlen Ness blinkers, KlockWerks KlipHanger bars, Avon grips

Spectro Golden 4 20w40 for Victory L.SG424, Kury Sabertooth LEDs
THE FEW, THE PROUD, THE OBSCURE. TTWFO2
broggyr is online now  
post #6 of 6 (permalink) Old 05-30-2019, 01:16 PM
Senior Member
 
visionjohnny's Avatar
 
Join Date: Sep 2010
Location: minnesota
Posts: 12,946
Default

If your bike is "stock" you really don't need a dyno tune cause there is nothing to tune if the shop can't get into the ECM
broggyr likes this.

2008 Vision
Mpls, MN.

Please add your state and model of bike you have. Click user CP @ top of page and then far left click edit signature. Thanks
visionjohnny is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Victory Forums - Victory Motorcycle Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools Search this Thread
Show Printable Version Show Printable Version
Email this Page Email this Page
Search this Thread:

Advanced Search
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome