Join Date: Apr 2012
Location: Fredericksburg, Va
1/4 Turn ring / stiff throttle?
I recently installed the ring on my bike; '08KPT w/ Vic heated grips.
On closing the switch housing, the throttle went stiff, particularly on return.
I was prepared to do a little cable rigging already, and had watched the video; so there was knowledge of vague grinding that may need to be done in the housing..........what I found was the throttle cable sheath ends were too long and were hitting the ring. Dremeled off about 5mm and good to go.
I don't know how other years and models are set up, but on mine- with the 3 screws and bottom housing plate removed, the guides and ring are easily visible....sorry, no pics taken.
I haven't come across this anywhere else, hope this helps somebody.
Dan / rider64
Victory heated grips
Victory highway bar / lowers
RAM GPS mount
Formotion clock/ thermometer / PowerPod
Misc chrome bits, Anodized bolts, widgets...
Lloydz IAV and 1/4 Turn Throttle Ring
2005 Bonneville Black
It ain't stock......