Fuel Injectors - Victory Forums - Victory Motorcycle Forum
Reply
 
LinkBack Thread Tools Search this Thread Display Modes
post #1 of 13 (permalink) Old 05-19-2014, 06:39 PM Thread Starter
Member
 
Join Date: Aug 2011
Location: Fuquay Varina, NC
Posts: 51
Garage
Default Fuel Injectors

Does anybody have any information on our fuel injectors? I am speaking specifically of a 2006 100 CI bike. I am working on a turbo system and would like to figure out what kind of flow rate the stock injectors offer and if they are high Z or low Z. I could just measure the impedance i suppose but still that wont tell me what their flow rate is. Would also like to know if there is anything out there for higher flow injectors that will fit since i cant find any info on them. Victory PN is 1253405 but that is about all the info i get.

Thanks!
moparx12 is offline  
Sponsored Links
Advertisement
 
post #2 of 13 (permalink) Old 05-19-2014, 09:42 PM
Senior Member
 
Speeddemon3579's Avatar
 
Join Date: Sep 2012
Location: middle, tn
Posts: 545
Default

Might want to call one of the builders. No luck on the web.

2000 V92SC
Middle Tenn
it ain't stock...

2000 V92SC
Rock Island,TN
If I can't buy it, I make it.
Just Getting Started
Speeddemon3579 is offline  
post #3 of 13 (permalink) Old 05-20-2014, 08:43 AM
Senior Member
 
visionjohnny's Avatar
 
Join Date: Sep 2010
Location: minnesota
Posts: 12,947
Default

Rylan at the Vic shop did a turbo he might know
http://thevicshop.com/Contact.html

2008 Vision
Mpls, MN.

Please add your state and model of bike you have. Click user CP @ top of page and then far left click edit signature. Thanks
visionjohnny is offline  
Sponsored Links
Advertisement
 
post #4 of 13 (permalink) Old 05-20-2014, 04:58 PM Thread Starter
Member
 
Join Date: Aug 2011
Location: Fuquay Varina, NC
Posts: 51
Garage
Default

Thanks guys. I sent an email off to Lloyd because i have spoken with him before. If he gets back to me that will be great if not i may try to contact one of the other guys.
moparx12 is offline  
post #5 of 13 (permalink) Old 05-20-2014, 10:29 PM
Senior Member
 
Speeddemon3579's Avatar
 
Join Date: Sep 2012
Location: middle, tn
Posts: 545
Default

It appears we run 1st gen GM Delphi injectors. Not sure which ones but.... One step closer

2000 V92SC
Middle Tenn
it ain't stock...

2000 V92SC
Rock Island,TN
If I can't buy it, I make it.
Just Getting Started
Speeddemon3579 is offline  
post #6 of 13 (permalink) Old 05-20-2014, 10:46 PM
Senior Member
 
Speeddemon3579's Avatar
 
Join Date: Sep 2012
Location: middle, tn
Posts: 545
Default

I know the fuel system is 40# but what are the injectors?

2000 V92SC
Middle Tenn
it ain't stock...

2000 V92SC
Rock Island,TN
If I can't buy it, I make it.
Just Getting Started
Speeddemon3579 is offline  
post #7 of 13 (permalink) Old 05-21-2014, 03:33 AM
Senior Member
 
Oldman47's Avatar
 
Join Date: Mar 2013
Location: Central Illinois
Posts: 1,414
Default

The fuel system runs 50 psi, not 40. I hope that means something to you. To me it is just a way of knowing if the fuel pump is working right.

Present ride - 2013 Victory Vision, black, ATW at +3, Lloydz air filter and adjustable intake, PC5, 30,xxx miles
Oldman47 is offline  
post #8 of 13 (permalink) Old 05-21-2014, 08:20 AM
Senior Member
 
Speeddemon3579's Avatar
 
Join Date: Sep 2012
Location: middle, tn
Posts: 545
Default

I keep doing that. Thanks for the reminder.

2000 V92SC
Middle Tenn
it ain't stock...

2000 V92SC
Rock Island,TN
If I can't buy it, I make it.
Just Getting Started
Speeddemon3579 is offline  
post #9 of 13 (permalink) Old 05-21-2014, 08:18 PM Thread Starter
Member
 
Join Date: Aug 2011
Location: Fuquay Varina, NC
Posts: 51
Garage
Default

Quote:
Originally Posted by Oldman47 View Post
The fuel system runs 50 psi, not 40. I hope that means something to you. To me it is just a way of knowing if the fuel pump is working right.
Thanks for that info, yes that will be important! So i went out and yanked one of the injectors off. I am currently trying to figure out specs on it and i am having a hard time even with the injector right in front of me.

The numbers on the side are:

0 280 156 140

And then near the clip, there is a printed number (the latter was molded in the plastic). That one is 127511
moparx12 is offline  
post #10 of 13 (permalink) Old 05-21-2014, 09:08 PM
Senior Member
 
Join Date: Mar 2011
Location: Buckeye, Az.
Posts: 1,417
Default Car parts?

Maybe you could contact Summit Racing. They sell hi-performance injectors for cars. Send them the numbers, maybe they match a Camero or something GM.

Buckeye, Arizona(USA) 2011 Victory Cross Roads, Black police bag guards, black engine guards, black handle bars, Triumph Tiger mirrors, Triumph hand grips, set speedo/tach back 5" , adjustable timing wheel, Lloyzz Fuel Programmer III & air filter. Modified exhaust, made stock into 2 into 1. MRA windshield, Rotated front fender forward,relocated ignition switch, Bad Ace Fuel Tank Risers, Fat front tire.
Speedblue is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Victory Forums - Victory Motorcycle Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools Search this Thread
Show Printable Version Show Printable Version
Email this Page Email this Page
Search this Thread:

Advanced Search
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome