Lyndall or EBC brake pads? - Victory Forums - Victory Motorcycle Forum
Reply
 
LinkBack Thread Tools Search this Thread Display Modes
post #1 of 14 (permalink) Old 07-26-2014, 01:44 PM Thread Starter
Lifetime Premium
 
toejam's Avatar
 
Join Date: Aug 2010
Location: Evansville, IN
Posts: 984
Default Lyndall or EBC brake pads?

Looking to replace the brake pads and wondered what the masses think of the Lyndall & EBC brake pads.

As far as Lyndall, I'm gravitating towards the Gold Plus 7175 for the fronts, and the Gold Plus 7176 for the rear I like the dustless idea. Just haven't seen that much about EBC and not sure what model numbers to look at that would be a close comparison to the LRB Gold Plus's. I would appreciate feedback on what to look for in the EBC line, and if there are reasons to, or reasons not to go with one versus the other. Thanks!

2013 Anti-Freeze Green XC
Vance & Hines Slip On's
Lloyd's VM1-DR Cams & Timing Wheel
Lloydz Air Filter, Lloydz Rev-Extend
BadBoy Horn, PCV
Gustafsson +4 Windscreen
Picasso Nano PN2.350D Amp
Audison Voce' AV X6.5 Speakers
HMD520 Gorilla Bagger Bars

2010 XC 116 Big Bore - Gone
2006 Hammer - Gone
toejam is offline  
Sponsored Links
Advertisement
 
post #2 of 14 (permalink) Old 07-26-2014, 04:36 PM
Senior Member
 
visionjohnny's Avatar
 
Join Date: Sep 2010
Location: minnesota
Posts: 12,949
Default

here there is 191 post on the pads

https://www.victoryforums.com/showthr...EBC+brake+pads

2008 Vision
Mpls, MN.

Please add your state and model of bike you have. Click user CP @ top of page and then far left click edit signature. Thanks
visionjohnny is offline  
post #3 of 14 (permalink) Old 07-28-2014, 06:52 AM
Senior Member
 
Squatch's Avatar
 
Join Date: Apr 2012
Location: Port Tobacco MD
Posts: 848
Default

TJ,
Went from OEm to Lyndall to EBC. Lyndall's preformed better than stock and EBC better than Lyndals.

Cheers

Squatch

USN/USCG Vet
2013 Cross Country Tour
Zumo 665 w/weather
Power Commander V
Lloydz Air filter
PTS set to +6*
Hydraulic Clutch
D&D wrapped/RPW baffles
Touring Cams
124 hp/119#ft

A country that forgets it's defenders, will itself soon be forgotten
Squatch is offline  
Sponsored Links
Advertisement
 
post #4 of 14 (permalink) Old 07-28-2014, 07:02 AM
Lifetime Premium
 
saddlebag's Avatar
 
Join Date: Jun 2011
Location: Dayton, Ohio
Posts: 5,632
Default

Quote:
Originally Posted by toejam View Post
Looking to replace the brake pads and wondered what the masses think of the Lyndall & EBC brake pads.

As far as Lyndall, I'm gravitating towards the Gold Plus 7175 for the fronts, and the Gold Plus 7176 for the rear I like the dustless idea. Just haven't seen that much about EBC and not sure what model numbers to look at that would be a close comparison to the LRB Gold Plus's. I would appreciate feedback on what to look for in the EBC line, and if there are reasons to, or reasons not to go with one versus the other. Thanks!
http://buywitchdoctors.com/c/293/vic...l-motorcycles/




https://www.victoryforums.com/signaturepics/sigpic6903_1.gif
2011 Cross Roads
saddlebag is offline  
post #5 of 14 (permalink) Old 07-28-2014, 07:04 AM
Lifetime Premium
 
half_crazy's Avatar
 
Join Date: Sep 2011
Location: Southern Maryland
Posts: 4,857
Default

EBC HH on mine.

2006 Victory Kingpin
Lloydz 116" Stroker/Big Bore, .495 Cams, Torque Tubes Airbox,
RPW Thor Pipe, Lloydz ECU Flash, PC-III, PTS (-2), Rivera
Primo Clutch Spring, 31 Tooth Pulley w/Buell Belt.
half_crazy is offline  
post #6 of 14 (permalink) Old 07-29-2014, 02:58 PM Thread Starter
Lifetime Premium
 
toejam's Avatar
 
Join Date: Aug 2010
Location: Evansville, IN
Posts: 984
Default

Quote:
Originally Posted by visionjohnny View Post
While I welcomed replies, I figured I could count on some thing that actually pointed me to specific part numbers which is part of what I requested in the comparison of brands. That link led me to 15 pages of mostly kids pissing in each others wheaties with regards to Witchdoctors. At least you could have checked your source, but thanks for trying. I ended up going with the EBC HH sintered pads. Case Closed......

2013 Anti-Freeze Green XC
Vance & Hines Slip On's
Lloyd's VM1-DR Cams & Timing Wheel
Lloydz Air Filter, Lloydz Rev-Extend
BadBoy Horn, PCV
Gustafsson +4 Windscreen
Picasso Nano PN2.350D Amp
Audison Voce' AV X6.5 Speakers
HMD520 Gorilla Bagger Bars

2010 XC 116 Big Bore - Gone
2006 Hammer - Gone

Last edited by toejam; 07-29-2014 at 06:38 PM.
toejam is offline  
post #7 of 14 (permalink) Old 07-29-2014, 04:13 PM
Senior Member
 
Join Date: Jun 2012
Location: Alberta, Canada
Posts: 482
Garage
Default

Can anyone recommend any low dust pads?

2013 Victory Hammer 8-Ball
mobgma is offline  
post #8 of 14 (permalink) Old 07-30-2014, 04:13 AM
Lifetime Premium
 
captainbrent's Avatar
 
Join Date: Feb 2013
Location: Panama City, Panama
Posts: 145
Default

Quote:
Originally Posted by mobgma View Post
Can anyone recommend any low dust pads?
Lyndall Gold+ and no squeaking noises!

'13 Sunset Red Judge
captainbrent is offline  
post #9 of 14 (permalink) Old 07-30-2014, 04:52 AM
Senior Member
 
Pheonix's Avatar
 
Join Date: Oct 2011
Location: Forest, VA (suburbia Lynchburg)
Posts: 537
Garage
Default

To answer the poster's original question....
Lyndall if you can afford them. EBC if you can't afford the Lyndalls. Either way it's an improvement over OEM's.

2011 Kingpin - Scarlett
Stage I Pipes with Thunder Monsters & NO Catcons
Ness Laydown Plate Holder with Custom Dynamics LED Plate Frame
Custom Ness Engine Covers
V92C Floorboards with NON-LOW Mounts
Ness Ram-Air
PC-V
Lloydz Timing Wheel
Dyno Tuned by 804 Motor Sports
97.26 HP / 110.42 # for now...
Pheonix is offline  
post #10 of 14 (permalink) Old 08-07-2014, 04:17 AM
Lifetime Premium
 
Motorbikerx's Avatar
 
Join Date: Dec 2013
Location: Gold Coast, Australia.
Posts: 8,651
Garage
Default

Just fitted the LYNDAL's rear pads to my Vegas today, was easy thanks to VisionJohnnys posting of the Witchdoctors vid (thx)
went for a 60 mile ride to try em out....silly me pulled over and grabbed the rear rotor to see how hot it was after a couple of stops...it was fkn HOT!.... cooled down with five mins riding so no caliper problems.
Works well...installed at 39,850 kms
the pads that came out had NISSIN on the back of them...would they be the originals???

Victory Vegas 2010
Lloydz 109"cube big bore
" " 495 cams
" " TorqueTubes
" " timing wheel @4 deg.
" " Primary plate
" " IAV
RPW Slash pipes
PCV
Progressive 465 rear shock
Kingpin USD Forks
18" XC front wheel
1 3/4" 'Burleigh Bars'
Stebel air horn
12.106 @110.90mph
114/123

Victory Cross Country 2010 (106)
Lloyds air filter
" " VM1 Cams
Home gutted exhaust
Maximus
Both tuned by [email protected] Dyno
110/116

Gold Coast
Australia
Motorbikerx is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Victory Forums - Victory Motorcycle Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools Search this Thread
Show Printable Version Show Printable Version
Email this Page Email this Page
Search this Thread:

Advanced Search
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome