Do Harley pegs fit on a victory - Victory Forums - Victory Motorcycle Forum
 
LinkBack Thread Tools Search this Thread Display Modes
post #1 of 9 (permalink) Old 02-05-2012, 02:07 PM Thread Starter
Member
 
Join Date: Sep 2010
Posts: 74
Default Do Harley pegs fit on a victory

I have a 2008 Hammer and found a nice set up pegs I'd like to install, but they say the fitment is for Harley. Do Harley pegs fit on a victory?

These are the pegs..
http://www.cruisercustomizing.com/ar...part/AN-06-470
willorlando is offline  
Sponsored Links
Advertisement
 
post #2 of 9 (permalink) Old 02-05-2012, 02:10 PM
Lifetime Premium
 
saddlebag's Avatar
 
Join Date: Jun 2011
Location: Dayton, Ohio
Posts: 5,632
Default

Quote:
Originally Posted by willorlando View Post
I have a 2008 Hammer and found a nice set up pegs I'd like to install, but they say the fitment is for Harley. Do Harley pegs fit on a victory?

These are the pegs..
http://www.cruisercustomizing.com/ar...part/AN-06-470
I doubt it. I don't believe Harleys don't do metric. There are probably pegs made for another metric bike in the catalog that would work though.




https://www.victoryforums.com/signaturepics/sigpic6903_1.gif
2011 Cross Roads
saddlebag is offline  
post #3 of 9 (permalink) Old 02-05-2012, 02:44 PM
Lifetime Premium
 
BBob's Avatar
 
Join Date: Aug 2010
Location: NW AZ
Posts: 12,825
Garage
BBob is offline  
Sponsored Links
Advertisement
 
post #4 of 9 (permalink) Old 02-05-2012, 02:44 PM
Senior Member
 
ashmostro's Avatar
 
Join Date: Apr 2011
Posts: 442
Default

Quote:
Originally Posted by saddlebag View Post
I doubt it. I don't believe Harleys don't do metric. There are probably pegs made for another metric bike in the catalog that would work though.
The deep cuts are available in victory-specific trim, so make sure you are getting the right versions. The harley versions wont fit right.

On that note, I actually have a pair of used BLACK deep cuts with the rubber comfort inserts that I want to sell. They are in very good shape- I just wanted a different look. PM me if you're interested and we can talk.

2011 Victory Kingpin 8-Ball
Tach / Dual front discs with Vesrah JL pads / Penske shock / S&S Intake / PCV & autotune / RPW Thor exhaust with homemade custom baffle / Tsukayu leather "Strong" bags / Avon Cobra *Radials* / Ness Vegas Peg Conversion / Ness Vegas driver's seat / Custom T-Apes from BR Custom Cycles
ashmostro is offline  
post #5 of 9 (permalink) Old 02-05-2012, 10:11 PM
Member
 
Join Date: Aug 2011
Posts: 41
Default

My Kuryakyn metric catalog is 2010, the adapter for front and rear on Hammer, Vegas, 8-ball, Jackpot and rear on Kingpin and Cross Roads is 8805. Might get the adapters and see if other pegs will fit the adapters or go with Kuryakyn pegs.

PaulK
Freeport, IL
2011 Vegas 8-Ball
Tri-Pro Stage 1 Exhaust
Mini Standard Windshield
Rear Lugage Rack (modified to fit)
Kingpin rear seat and bar
long Progressive Suspension rear shock
TCB brake system on rear brake
Fiberglass saddlebags (lockable & don't leak)
LED headlight
Magnum front cast rim
Magnum front fender
FilterMag
Signal Sorcerer
Animal Alarm System
PaulK is offline  
post #6 of 9 (permalink) Old 02-06-2012, 01:48 PM
Senior Member
 
visionjohnny's Avatar
 
Join Date: Sep 2010
Location: minnesota
Posts: 12,947
Default

Quote:
Originally Posted by willorlando View Post
I have a 2008 Hammer and found a nice set up pegs I'd like to install, but they say the fitment is for Harley. Do Harley pegs fit on a victory?

These are the pegs..
http://www.cruisercustomizing.com/ar...part/AN-06-470
Seeing how there Ness pegs why not call them and ask

2008 Vision
Mpls, MN.

Please add your state and model of bike you have. Click user CP @ top of page and then far left click edit signature. Thanks
visionjohnny is offline  
post #7 of 9 (permalink) Old 02-06-2012, 02:00 PM
Senior Member
 
ndabunka's Avatar
 
Join Date: Mar 2011
Location: Charlotte, NC
Posts: 1,858
Default

The bottom line here is "How do these pegs attach to the bike"? As others have stated, Ness makes pegs for both Harley's and Victory's and they may well be different measurements. However, as others have pointed out, you can buy the correct components to connect these to a specific bike.

I have subscribed to this thread because I am in the middle of putting some highway pegs on a Cross Country and was interested in what others are doing. In my case, I have some Kuryakyn Short Magnum footpeg "adapters" (made for Harley) that will be here tomorrow. I also have some Ness footpegs (made for Victory) that will be here later in the week. At that time, I will be able to tell you if my solution will work so that may give you some guidance (if your considering using adapters).




It's not just any victory.... It's MY Victory!

2011 Victory Ness Cross Country #120
Ness Thunderheaders
Ness Knurled Highway Pegs/KwelMetal Brackets
Ness Radius laydown license
Chrome CAM Tension Covers
Red Engine Bolts
Madstad System
DIY Garage Door Opener
Victory Chrome Saddle Bag Lid Rails
Küryakyn Upper Fork Shrouds
Küryakyn Lower Fork Covers
Power Commander V Tuner
Power Commander AT-300
Hertz HCX 165s Speakers
JL Audio HX280/4 Bridged 140w
ndabunka is offline  
post #8 of 9 (permalink) Old 02-07-2012, 02:56 PM Thread Starter
Member
 
Join Date: Sep 2010
Posts: 74
Default

The Deep Cuts for the Vicotry look different than for the Harley. The pictures for the Harly look more rounded and nicer to me.
willorlando is offline  
post #9 of 9 (permalink) Old 02-08-2012, 09:59 PM
Junior Member
 
Join Date: Nov 2011
Posts: 6
Default

I can't answer for your particular choice of foot peg, however I can tell you that I fit Ness Twister Style pegs meant for a Harley on my Vic...with some modification. First of all the Harley pegs are narrower than the Vic foot peg support bracket, which makes for a sloppy fit. I solved this by making (4) .125" spacers. Once I did this they didn't fold up at all. Given the lack of cornering clearance, I took a die grinder to the pegs to resolve that issue. From 3 feet away, if I didn't tell you, you wouldn't know....I'm cheap, I got a deal, and had the tools...unless you are in the same boat; just get the pegs for a Victory.
ChewyR is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Victory Forums - Victory Motorcycle Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools Search this Thread
Show Printable Version Show Printable Version
Email this Page Email this Page
Search this Thread:

Advanced Search
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome