exhaust fitment question - Victory Forums - Victory Motorcycle Forum
 
LinkBack Thread Tools Search this Thread Display Modes
post #1 of 10 (permalink) Old 06-11-2015, 08:03 AM Thread Starter
Junior Member
 
david_bailey1981's Avatar
 
Join Date: Dec 2013
Location: Burlington MI
Posts: 24
Default exhaust fitment question

2001 V92C. Right now i have straight drag pipes. Put baffles and power cones in and still have popping problems. Found small cracks in the header pipe. Need to replace. I found a set of new stage 1 pipes for a 03-05 kingpin. From what i have read, its the same engine as the V92C. My question is, will they fit if i modify/fabricate the mounting bracket? Also, the reflash card doesn't come with it. Since i have a PC3, do i need that? And finally, what kind of sound will i get compared to stock and the drags?
david_bailey1981 is offline  
Sponsored Links
Advertisement
 
post #2 of 10 (permalink) Old 06-11-2015, 02:28 PM
Senior Member
 
visionjohnny's Avatar
 
Join Date: Sep 2010
Location: minnesota
Posts: 12,945
Default

with a PC3 you don't ever need a flash
as for sound who knows we never heared what you have now and don't know what the new pipes sound like.
Make sure you put in new exhaust gaskets

2008 Vision
Mpls, MN.

Please add your state and model of bike you have. Click user CP @ top of page and then far left click edit signature. Thanks
visionjohnny is offline  
post #3 of 10 (permalink) Old 06-11-2015, 02:47 PM Thread Starter
Junior Member
 
david_bailey1981's Avatar
 
Join Date: Dec 2013
Location: Burlington MI
Posts: 24
Default

Ok. So those should fit on the V92C with a mounting bracket adjustment? And i meant in general as far as sound. But i can see how it would be hard to determine. Thank you.
david_bailey1981 is offline  
Sponsored Links
Advertisement
 
post #4 of 10 (permalink) Old 07-15-2015, 03:52 PM
Junior Member
 
Join Date: Jan 2015
Location: Union, KY
Posts: 24
Send a message via Yahoo to RuhRoh
Default

Were you able to fit those Kingpin pipes to your 01 v92c? I have the same bike and I'm having a tough time finding any aftermarket pipes to give it some attitude.
RuhRoh is offline  
post #5 of 10 (permalink) Old 07-15-2015, 04:13 PM Thread Starter
Junior Member
 
david_bailey1981's Avatar
 
Join Date: Dec 2013
Location: Burlington MI
Posts: 24
Default

I didnt end up getting them because u never got a firm answer in weather they would fit or not. Im going to hold off till the winter and get these: http://www.victoryonly.com/product/e...es-99-01-v92c/
david_bailey1981 is offline  
post #6 of 10 (permalink) Old 08-14-2015, 12:01 PM
Junior Member
 
Join Date: Jan 2015
Location: Union, KY
Posts: 24
Send a message via Yahoo to RuhRoh
Default

I was looking at those too. You going with the shorties or going long?
RuhRoh is offline  
post #7 of 10 (permalink) Old 08-14-2015, 02:09 PM Thread Starter
Junior Member
 
david_bailey1981's Avatar
 
Join Date: Dec 2013
Location: Burlington MI
Posts: 24
Default

Well actually....i ended up running into a guy that had put the Kingpin pipes on his V92C. They actually fit perfectly. All i had to do is cut the square piece with the 4 bolt holes off of the kingpin mounting bracket and weld it to the existing V92C braket. Worked like a charm. Pipes sound great (low rumble. Quieter than straight pipes but a good sound) and my bike runs like a raped ape. I would have never imagined just changing pipes (and having a generic PC3 map for those pipes) would make such a difference. If you can find a set, do it. You wont regret it.
david_bailey1981 is offline  
post #8 of 10 (permalink) Old 08-14-2015, 03:15 PM
Junior Member
 
Join Date: Jan 2015
Location: Union, KY
Posts: 24
Send a message via Yahoo to RuhRoh
Default

So what year Kingpin did they come off of? Were they stock or Stage 1 pipes? Got a pic of them? Found a set on ebay - says it fits 03-05 Kingpin. They are slashcut full system. Is that what you got?

Union Ky
2001 V92C Deluxe
RuhRoh is offline  
post #9 of 10 (permalink) Old 08-14-2015, 04:17 PM Thread Starter
Junior Member
 
david_bailey1981's Avatar
 
Join Date: Dec 2013
Location: Burlington MI
Posts: 24
Default

Yep. Those are exactly it. I have stage 1s. Probably from the same guy. He seemed to have a few sets. I will say, if it is the same guy, when he says brand new, he means brand new. Still wrapped in packing material, and bag of parts sealed. Get a thing of goo gone. The packing stuff stuck to my heat shields due to it being wrapped in it for 10+ years. But a little elbow gease took it right off. I will try to get a good pic when i get a chance. But just 1 precaution. They are a BITCH to put on. Definitely not a 1 man job. Lol
david_bailey1981 is offline  
post #10 of 10 (permalink) Old 08-14-2015, 04:26 PM
Junior Member
 
Join Date: Jan 2015
Location: Union, KY
Posts: 24
Send a message via Yahoo to RuhRoh
Default

Thanks - would be interested in a pic for sure.

Union Ky
2001 V92C Deluxe
RuhRoh is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Victory Forums - Victory Motorcycle Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools Search this Thread
Show Printable Version Show Printable Version
Email this Page Email this Page
Search this Thread:

Advanced Search
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome