v92 engine swap, kevin x - Victory Forums - Victory Motorcycle Forum
 
LinkBack Thread Tools Search this Thread Display Modes
post #1 of 7 (permalink) Old 09-29-2010, 10:22 PM Thread Starter
Member
 
Join Date: Sep 2010
Posts: 60
Default v92 engine swap, kevin x

ive got a 1999 victory v92c with transmission problems. jumps out of 4th gear. i tear it down and it has bent forks and rails and dog gears are worn. parts are too expensive and the trans has design flaws. my question is: will a 2001 engine bolt on? up to what year will bolt on? what would i need for a swap? computer, sensors? the bike means alot to me and i want to put a reliable motor on it. any info on the subject of and engine swap would be greatly appreciated.
1madvic is offline  
Sponsored Links
Advertisement
 
post #2 of 7 (permalink) Old 09-30-2010, 06:12 AM
Lifetime Premium
 
kevinx's Avatar
 
Join Date: Dec 2009
Location: At Southern Motorworx. High Springs Fl
Posts: 2,646
Default

The 01 is a direct bolt in, and with very little work any 92" up through 06 will bolt in
kevinx is offline  
post #3 of 7 (permalink) Old 09-30-2010, 10:32 PM Thread Starter
Member
 
Join Date: Sep 2010
Posts: 60
Default v92 engine swap

is there any where i can double check the id numbers on the engine unit so i know i dont get another 99-00 piece of junk. if anyone has an engine unit to sell, email [email protected]

drew
1madvic is offline  
Sponsored Links
Advertisement
 
post #4 of 7 (permalink) Old 10-01-2010, 06:02 AM
Lifetime Premium
 
kevinx's Avatar
 
Join Date: Dec 2009
Location: At Southern Motorworx. High Springs Fl
Posts: 2,646
Default

If the motor looks the same, and has a speed sensor mounted in the top of the case behind the rear cyl. It is a 99-00. Though the tranny may have been updated if the motor also has a speed sensor "looking" at the drive sprocket.
The 99 is the only year that had gloss black for the motor. Starting in 00 the engines were satin, textured finish

To put in a later Freedom 92" motor 02-06. All you need to do is to swap the crank trigger wheel, and voltage regulator. The rest will work as is
kevinx is offline  
post #5 of 7 (permalink) Old 10-05-2010, 12:14 PM Thread Starter
Member
 
Join Date: Sep 2010
Posts: 60
Default kevinx v92 engine swap

i found a 2002, v92 for my 99 swap. can i use the crank trigger wheel and voltage regulator off my 99 to complete the swap?
1madvic is offline  
post #6 of 7 (permalink) Old 10-05-2010, 12:54 PM Thread Starter
Member
 
Join Date: Sep 2010
Posts: 60
Default kevinx v92 engine swap

where is the crank trigger wheel located. do you have to seperate the cases. i cant find it on the microfiche.
1madvic is offline  
post #7 of 7 (permalink) Old 10-05-2010, 01:22 PM Thread Starter
Member
 
Join Date: Sep 2010
Posts: 60
Default kevinx v92 engine swap

is the crank trigger wheel the flywheel exciter ring?
1madvic is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Victory Forums - Victory Motorcycle Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools Search this Thread
Show Printable Version Show Printable Version
Email this Page Email this Page
Search this Thread:

Advanced Search
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome