Crankcase Breather Replacement Filter - Victory Forums - Victory Motorcycle Forum
 
LinkBack Thread Tools Search this Thread Display Modes
post #1 of 9 (permalink) Old 01-14-2015, 02:52 PM Thread Starter
Lifetime Premium
 
BP6666VR's Avatar
 
Join Date: Dec 2013
Location: World Citizen = A peaceful and peacemaking individual, both in daily life and contacts with others
Posts: 5,853
Default Crankcase Breather Replacement Filter

Hi Guys,

Did anybody have a "Crankcase Breather Replacement Filter"

I was searching the JP site and ran into them,

http://www.jpcycles.com/2013-victory-jackpot/lower-end

so what and how does this breather fit on Victory? I am making my shopping list for 2015 and was wondering how to make this look better on the bike?

Now I got a ugly rubber tube with a nice filter on top due to Torque Tubes, but did anybody have a better solution? It needs minimum 15 Cm upwards or else the oil will be thrown out of the tube I read in the TT manual when I installed it?

JACKPOT 2013 orange MADNESS :-) *HOH-VM1-DR*TachoMeter*PowCom-5*AutoTune*ATS*TorTube & (IAC) & nitro*Swept exhaust*LYNDALL & EBC brakes Front & Rear*Stainless Beads*Fwd Contr 4" *2 x Bad Boy Air Horn*Seven Color Lizard*NGK plugs*Blue Spark Plug Wir*Victory Oil*KN Oil filter*Oil Analysis*Clutch Cover*Kickst Repl Rubb*Invisble-A-Key*L.E.D. Batt. Gauge*Pulsating Brake Light*VictoryHID*Lice Bracket OVAL*BoltKit-Chrome*

Cross Country Tour 2014 [B]
BP6666VR is online now  
Sponsored Links
Advertisement
 
post #2 of 9 (permalink) Old 01-14-2015, 04:41 PM
Lifetime Premium
 
Motorbikerx's Avatar
 
Join Date: Dec 2013
Location: Gold Coast, Australia.
Posts: 8,481
Garage
Default

Quote:
Originally Posted by BP6666VR View Post
Hi Guys,

Did anybody have a "Crankcase Breather Replacement Filter"

I was searching the JP site and ran into them,

http://www.jpcycles.com/2013-victory-jackpot/lower-end

so what and how does this breather fit on Victory? I am making my shopping list for 2015 and was wondering how to make this look better on the bike?

Now I got a ugly rubber tube with a nice filter on top due to Torque Tubes, but did anybody have a better solution? It needs minimum 15 Cm upwards or else the oil will be thrown out of the tube I read in the TT manual when I installed it?
Looks flashier than the one in the TTI KIT hey!
Mines hidden up under the tank anyway.
Up to you and your imagination as to where you place that shiny one.

Victory Vegas 2010
Lloydz 109"cube big bore
" " 495 cams
" " TorqueTubes
" " timing wheel @4 deg.
" " Primary plate
" " IAV
RPW Slash pipes
PCV
Progressive 465 rear shock
Kingpin USD Forks
18" XC front wheel
1 3/4" 'Burleigh Bars'
Stebel air horn
12.106 @110.90mph
114/123

Victory Cross Country 2010 (106)
Lloyds air filter
" " VM1 Cams
Home gutted exhaust
Maximus
Both tuned by [email protected] Dyno
110/116

Gold Coast
Australia
Motorbikerx is offline  
post #3 of 9 (permalink) Old 01-14-2015, 10:01 PM
Senior Member
 
visionjohnny's Avatar
 
Join Date: Sep 2010
Location: minnesota
Posts: 12,872
Default

you really don't need it but if you do just pull your hose off the frame rout it down back of motor and hose clamp the filter on.
Yes those filters will work you only need one

2008 Vision
Mpls, MN.

Please add your state and model of bike you have. Click user CP @ top of page and then far left click edit signature. Thanks
visionjohnny is offline  
Sponsored Links
Advertisement
 
post #4 of 9 (permalink) Old 01-15-2015, 07:10 AM Thread Starter
Lifetime Premium
 
BP6666VR's Avatar
 
Join Date: Dec 2013
Location: World Citizen = A peaceful and peacemaking individual, both in daily life and contacts with others
Posts: 5,853
Default

I was thinking of putting a flexible stainless steel hose like a breakline then connecting to the TT filter or a new filter. Surly this lools much better then the big black hose originally from vic ?

Of cource I do not need that. That goos the same for many other items on any bike ?

JACKPOT 2013 orange MADNESS :-) *HOH-VM1-DR*TachoMeter*PowCom-5*AutoTune*ATS*TorTube & (IAC) & nitro*Swept exhaust*LYNDALL & EBC brakes Front & Rear*Stainless Beads*Fwd Contr 4" *2 x Bad Boy Air Horn*Seven Color Lizard*NGK plugs*Blue Spark Plug Wir*Victory Oil*KN Oil filter*Oil Analysis*Clutch Cover*Kickst Repl Rubb*Invisble-A-Key*L.E.D. Batt. Gauge*Pulsating Brake Light*VictoryHID*Lice Bracket OVAL*BoltKit-Chrome*

Cross Country Tour 2014 [B]
BP6666VR is online now  
post #5 of 9 (permalink) Old 01-15-2015, 07:15 AM Thread Starter
Lifetime Premium
 
BP6666VR's Avatar
 
Join Date: Dec 2013
Location: World Citizen = A peaceful and peacemaking individual, both in daily life and contacts with others
Posts: 5,853
Default

[QUOTE=BP6666VR;1302730]I was thinking of putting a flexible stainless steel hose like a breakline then connecting to the TT filter or a new filter. Surly this lools much better then the big black hose originally from vic ?

Visionjohny thanks so it is crimpt? I am offshore so I cannot look at the bike. Just planning ahead for the next staps to dressup the bike. It is the little thimgs that count the most ?
..
Of cource I do not need that. That goos the same for many other items on any bike ?

JACKPOT 2013 orange MADNESS :-) *HOH-VM1-DR*TachoMeter*PowCom-5*AutoTune*ATS*TorTube & (IAC) & nitro*Swept exhaust*LYNDALL & EBC brakes Front & Rear*Stainless Beads*Fwd Contr 4" *2 x Bad Boy Air Horn*Seven Color Lizard*NGK plugs*Blue Spark Plug Wir*Victory Oil*KN Oil filter*Oil Analysis*Clutch Cover*Kickst Repl Rubb*Invisble-A-Key*L.E.D. Batt. Gauge*Pulsating Brake Light*VictoryHID*Lice Bracket OVAL*BoltKit-Chrome*

Cross Country Tour 2014 [B]
BP6666VR is online now  
post #6 of 9 (permalink) Old 01-15-2015, 07:16 AM Thread Starter
Lifetime Premium
 
BP6666VR's Avatar
 
Join Date: Dec 2013
Location: World Citizen = A peaceful and peacemaking individual, both in daily life and contacts with others
Posts: 5,853
Default

Shitty touchscreen phones. :banghead:

JACKPOT 2013 orange MADNESS :-) *HOH-VM1-DR*TachoMeter*PowCom-5*AutoTune*ATS*TorTube & (IAC) & nitro*Swept exhaust*LYNDALL & EBC brakes Front & Rear*Stainless Beads*Fwd Contr 4" *2 x Bad Boy Air Horn*Seven Color Lizard*NGK plugs*Blue Spark Plug Wir*Victory Oil*KN Oil filter*Oil Analysis*Clutch Cover*Kickst Repl Rubb*Invisble-A-Key*L.E.D. Batt. Gauge*Pulsating Brake Light*VictoryHID*Lice Bracket OVAL*BoltKit-Chrome*

Cross Country Tour 2014 [B]
BP6666VR is online now  
post #7 of 9 (permalink) Old 01-15-2015, 07:26 AM
Lifetime Premium
 
Motorbikerx's Avatar
 
Join Date: Dec 2013
Location: Gold Coast, Australia.
Posts: 8,481
Garage
Default

Yeah mate some stainless braided line would look shit-hot (great) on your Jackpot!!
Jackpots the full on bling machine so why not
Im presuming you got the shiny end caps on your torquetubes filters too?
Let your imagination run wild!

Victory Vegas 2010
Lloydz 109"cube big bore
" " 495 cams
" " TorqueTubes
" " timing wheel @4 deg.
" " Primary plate
" " IAV
RPW Slash pipes
PCV
Progressive 465 rear shock
Kingpin USD Forks
18" XC front wheel
1 3/4" 'Burleigh Bars'
Stebel air horn
12.106 @110.90mph
114/123

Victory Cross Country 2010 (106)
Lloyds air filter
" " VM1 Cams
Home gutted exhaust
Maximus
Both tuned by [email protected] Dyno
110/116

Gold Coast
Australia
Motorbikerx is offline  
post #8 of 9 (permalink) Old 01-15-2015, 07:52 AM Thread Starter
Lifetime Premium
 
BP6666VR's Avatar
 
Join Date: Dec 2013
Location: World Citizen = A peaceful and peacemaking individual, both in daily life and contacts with others
Posts: 5,853
Default

I did not get the shiny endcaps on the kn filters.... I think they were stamped with Lloydz ??? If i remember correctly ?? So i did not see the point of that jajana

Anyway. Yes i agree the small details make tje Jackpot an eye catcher

Got these chrome boltcovers and as cheap looking as they are you can clearly see the difference.... Also every bolt i open on my jackpot i change for stainless and that looks much better then the cadmium bolts from vic. And cheap

JACKPOT 2013 orange MADNESS :-) *HOH-VM1-DR*TachoMeter*PowCom-5*AutoTune*ATS*TorTube & (IAC) & nitro*Swept exhaust*LYNDALL & EBC brakes Front & Rear*Stainless Beads*Fwd Contr 4" *2 x Bad Boy Air Horn*Seven Color Lizard*NGK plugs*Blue Spark Plug Wir*Victory Oil*KN Oil filter*Oil Analysis*Clutch Cover*Kickst Repl Rubb*Invisble-A-Key*L.E.D. Batt. Gauge*Pulsating Brake Light*VictoryHID*Lice Bracket OVAL*BoltKit-Chrome*

Cross Country Tour 2014 [B]
BP6666VR is online now  
post #9 of 9 (permalink) Old 01-15-2015, 08:06 AM
Lifetime Premium
 
Motorbikerx's Avatar
 
Join Date: Dec 2013
Location: Gold Coast, Australia.
Posts: 8,481
Garage
Default

Yeah I plan on changing out the stock Allen bolts as they're soft as hard cheese.
I balked at the expense more than not wanting to advertise for Lloydz.
Maybe a lid off a paint tin or something is the right size, maube cut a circle of stainless or polished aluminium?
my black ones have the name embossed into them but its sort of crumbling off anyway.
I did contact K and N filters to ask how long between cleans for them and they suggested 50,000 miles!
Or when you cant see thr metal mesh any more.
So even at my rate of clocking up miles thats a couple of years!

Victory Vegas 2010
Lloydz 109"cube big bore
" " 495 cams
" " TorqueTubes
" " timing wheel @4 deg.
" " Primary plate
" " IAV
RPW Slash pipes
PCV
Progressive 465 rear shock
Kingpin USD Forks
18" XC front wheel
1 3/4" 'Burleigh Bars'
Stebel air horn
12.106 @110.90mph
114/123

Victory Cross Country 2010 (106)
Lloyds air filter
" " VM1 Cams
Home gutted exhaust
Maximus
Both tuned by [email protected] Dyno
110/116

Gold Coast
Australia
Motorbikerx is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Victory Forums - Victory Motorcycle Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools Search this Thread
Show Printable Version Show Printable Version
Email this Page Email this Page
Search this Thread:

Advanced Search
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome