Anyone want an Underdrive pulley for there Jackpot? - Victory Forums - Victory Motorcycle Forum
 
LinkBack Thread Tools Search this Thread Display Modes
post #1 of 6 (permalink) Old 05-06-2014, 08:47 PM Thread Starter
Lifetime Premium
 
p.hunt's Avatar
 
Join Date: Jul 2013
Location: Roseburg Oregon
Posts: 458
Default Anyone want an Underdrive pulley for there Jackpot?

In the hammer section we are trying to get the guy that builds them for the narrow tire bikes to make one for us fat tire guys.

What does it do? Here is a description from Conquest Customs website for the one for the skinny tire bikes if they make one for us it will be just the same results.

Conquest Underdrive Pulley for 05 & Up Narrow tire bikes (100 & 106ci) for the Vision, Cross Bikes, KingPin & Vegas.
1045 Carbo Steel.
Increased performance without engine mods!
It reduces the tooth count from 33 to 31
Quicker launch
Better roll on acceleration
Stay in the "sweet spot" RPM range during slower riding speeds
7 % RPM differential in 6th gear


I don't know about you but my hammer and my old jackpot just seemed to be lugging in 6th gear unless I am doing 80mph. People are also saying the bikes get better fuel mileage using these and running highway speeds at about 2900 rpm

So Speak up if you would seriously buy one so we can finally convince them to make it!

2012 Vision - in process of converting to Cross Country rear end and bags
Lloyd's -Filter-Timing wheel-Adjustable Intake-Throttle ring
PCV5
Home built 2 into 1 pipe with dummy pipe on left looks stock
p.hunt is offline  
Sponsored Links
Advertisement
 
post #2 of 6 (permalink) Old 05-06-2014, 08:52 PM Thread Starter
Lifetime Premium
 
p.hunt's Avatar
 
Join Date: Jul 2013
Location: Roseburg Oregon
Posts: 458
Default

Here is a link to Conquest customs to see what it is. Look around and buy some other stuff Scott is a great guy!

http://www.conquestcustoms.com/Underdrivepulley.aspx

2012 Vision - in process of converting to Cross Country rear end and bags
Lloyd's -Filter-Timing wheel-Adjustable Intake-Throttle ring
PCV5
Home built 2 into 1 pipe with dummy pipe on left looks stock
p.hunt is offline  
post #3 of 6 (permalink) Old 07-30-2014, 11:52 PM
Lifetime Premium
 
BP6666VR's Avatar
 
Join Date: Dec 2013
Location: World Citizen = A peaceful and peacemaking individual, both in daily life and contacts with others
Posts: 5,853
Default

There are quite a few treads about under drive pulley out there for fat tires; the latest and actual conformation of fabricating;

https://www.victoryforums.com/showthread.php?t=91858

JACKPOT 2013 orange MADNESS :-) *HOH-VM1-DR*TachoMeter*PowCom-5*AutoTune*ATS*TorTube & (IAC) & nitro*Swept exhaust*LYNDALL & EBC brakes Front & Rear*Stainless Beads*Fwd Contr 4" *2 x Bad Boy Air Horn*Seven Color Lizard*NGK plugs*Blue Spark Plug Wir*Victory Oil*KN Oil filter*Oil Analysis*Clutch Cover*Kickst Repl Rubb*Invisble-A-Key*L.E.D. Batt. Gauge*Pulsating Brake Light*VictoryHID*Lice Bracket OVAL*BoltKit-Chrome*

Cross Country Tour 2014 [B]
BP6666VR is offline  
Sponsored Links
Advertisement
 
post #4 of 6 (permalink) Old 07-31-2014, 10:07 AM
ptc
Senior Member
 
ptc's Avatar
 
Join Date: Feb 2014
Location: Northern CA
Posts: 504
Default

I guess I am curious as to why you think you need to use 6th gear all the time? (if youre not doing 80mph...) just use 5th, they are both overdrive gears on these bikes.

Gears 1 thru 4 are basic all around gears and should be used for all your riding with about 3000 rpm being the max "cruising" rpm, seems to be the motor speed the 106" motor just purrs. Over that shift the the next gear... 5th gear above 60 for me usually and then if Im legging it out I go into 6th. and yes that is usually above 80 mph around the country roads where I live.

Lets go cruisin'

2011 Custom "Hammered XR"
http://streetbikeusa.blogspot.com/

BBob- "We all share the same wind regardless of the t-shirts we wear"
ptc is offline  
post #5 of 6 (permalink) Old 07-31-2014, 03:44 PM
Senior Member
 
Join Date: May 2014
Location: Washington State
Posts: 2,218
Default

Quote:
Originally Posted by ptc View Post
I guess I am curious as to why you think you need to use 6th gear all the time? (if youre not doing 80mph...) just use 5th, they are both overdrive gears on these bikes.

Gears 1 thru 4 are basic all around gears and should be used for all your riding with about 3000 rpm being the max "cruising" rpm, seems to be the motor speed the 106" motor just purrs. Over that shift the the next gear... 5th gear above 60 for me usually and then if Im legging it out I go into 6th. and yes that is usually above 80 mph around the country roads where I live.

Lets go cruisin'
I think the cams are slightly different in his bike from the factory giving a little less low end torque with an increase in top end over a X bike. That is what I was told by a factory rep. Adding an after market exhaust and stage 1 lessens that torque low end torque even more.
An under drive pulley could make a lot of sense if this is the case.
Would make it a more fun bike when you aren't going 85. Which is most of the time.

presently owned bikes
2014 XC 8 ball that no longer stalls
1993 HD fxrp
1982 HD Sturgis
2009 Honda rebel
co owner
1991 gl1500 A w/ Champion Daytona 2+2 sidecar.
"God works both good and evil in a mans' life and you deal with it as best you can" Somebody..
Joe_ is offline  
post #6 of 6 (permalink) Old 08-01-2014, 12:42 AM
Lifetime Premium
 
BP6666VR's Avatar
 
Join Date: Dec 2013
Location: World Citizen = A peaceful and peacemaking individual, both in daily life and contacts with others
Posts: 5,853
Default

Thanks Joe, You are correct,

ptc
if most of the riding is done on "B" roads and not on high-ways then a under-drive-pulley would be a good option, there are only "high-ways" on the next islands....

Just search the treads on other bikes with narrow tires who installed the smaller pulley, they say it is GREAT so what would be the difference for wide tire bikes??

fifth gear on victory's are really GREAT so hopefully with the under-drive-pulley the 6th will be great also? now the 6th is 1:1 as per manual.....

JACKPOT 2013 orange MADNESS :-) *HOH-VM1-DR*TachoMeter*PowCom-5*AutoTune*ATS*TorTube & (IAC) & nitro*Swept exhaust*LYNDALL & EBC brakes Front & Rear*Stainless Beads*Fwd Contr 4" *2 x Bad Boy Air Horn*Seven Color Lizard*NGK plugs*Blue Spark Plug Wir*Victory Oil*KN Oil filter*Oil Analysis*Clutch Cover*Kickst Repl Rubb*Invisble-A-Key*L.E.D. Batt. Gauge*Pulsating Brake Light*VictoryHID*Lice Bracket OVAL*BoltKit-Chrome*

Cross Country Tour 2014 [B]
BP6666VR is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Victory Forums - Victory Motorcycle Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools Search this Thread
Show Printable Version Show Printable Version
Email this Page Email this Page
Search this Thread:

Advanced Search
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome