wheel change help - Victory Forums - Victory Motorcycle Forum
 
LinkBack Thread Tools Search this Thread Display Modes
post #1 of 4 (permalink) Old 08-09-2014, 12:16 AM Thread Starter
Junior Member
 
Join Date: Nov 2012
Posts: 8
Default wheel change help

I am putting wheels from a 2011 crossroads on my 2012 highball it seems that the front hub is about 2 inches narrower than the highball wheel making a large gap on the right side of the bikes axle do I need a spacer or not since the caliper is holding the wheel in place. Also it looks off center more to the left side is this normal and just more noticeable because of the skinnier front tire not sure what to do please help.
hball is offline  
Sponsored Links
Advertisement
 
post #2 of 4 (permalink) Old 08-09-2014, 02:20 PM
Senior Member
 
Luciferiad's Avatar
 
Join Date: Apr 2012
Location: Twin Falls, ID
Posts: 1,292
Garage
Default

I know for certain the Cross bikes have different-length spacers on either side of the wheels, both front and rear. Also, the Cross bikes use cartridge forks, rather than damper-rod forks as your Highball is equipped with. That might be making a bit of difference as well.

You can call me Billy. Or Luci. But don't call me Shirley.

Mine:
2011 Cross Roads, crimson red
Lloyd'z ATS, IAV, VFC-III. Vic "High Performance" air filter. Ness Big Honkers. Funsies.

Hers
2015 Vegas 8-Ball

My musings:www.billyrulez.wordpress.com
Luciferiad is offline  
post #3 of 4 (permalink) Old 08-09-2014, 03:18 PM
Senior Member
 
visionjohnny's Avatar
 
Join Date: Sep 2010
Location: minnesota
Posts: 12,871
Default

what is the width of both hubs where the axle goes threw. Stick a tape measure threw the hole and find out.
Now your going to have to find what length axle spacers you need to get wheel in "center" of forks.
Once you have wheel in the center of forks then you will have to find out how much you have to space the rotor out.
The rotor is the last thing to do not the first

2008 Vision
Mpls, MN.

Please add your state and model of bike you have. Click user CP @ top of page and then far left click edit signature. Thanks

Last edited by visionjohnny; 08-09-2014 at 03:21 PM.
visionjohnny is offline  
Sponsored Links
Advertisement
 
post #4 of 4 (permalink) Old 08-09-2014, 03:38 PM
Senior Member
 
Big Tav's Avatar
 
Join Date: Jul 2012
Location: Edinburgh, Scotland!
Posts: 976
Default

The HB Trees are wider. I was looking at maybe putting Ness Jackpot Rims on my bike but I was told the wheel is skinnier and since my trees are wider than a Vegas I would need spacers.

2015 Highball Black - Mods being done now!

Suzuki M109R L0 - Sold
BMW K1200R - Sold
Suzuki TL1000R - Sold
2014 Victory Hammer S - Sold

2012 Victory Highball - Swept Pipes, RPW Baffles Stage 1, 02's Removed, Lloydz Timing Wheel 4+, 1/4 Turn Throttle Ring, Mini Bullitt LED Indictors, Kewl Metal Brackets, Arlen Ness Pegs & Grips, Arlen Ness Cam Cover, K&P Oil Filter, Magnetic Sump Plug, Rear Axle Covers, Black Engine Bolt Kit. - Now Sold :(
Big Tav is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Victory Forums - Victory Motorcycle Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools Search this Thread
Show Printable Version Show Printable Version
Email this Page Email this Page
Search this Thread:

Advanced Search
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome