2007 Hammer Questions - Victory Forums - Victory Motorcycle Forum
 
LinkBack Thread Tools Search this Thread Display Modes
post #1 of 10 (permalink) Old 06-18-2015, 05:43 AM Thread Starter
Member
 
Join Date: Jun 2015
Posts: 57
Default 2007 Hammer Questions

Hey guys

I recently bought an 07 Hammer. It has 18,000 miles and still had the original front tire so i put a Dunlop Elite 3 on it. After installation, i noticed a large gap on the right or exhaust side of the bike. Check the pictures out. I checked the service manual and the spacers are oriented correctly. I just cant wrap my head around how the tire doesnt shift on the axle. Also, i recently purchased the S&S airbox and a PC3. I noticed the ignition tables don't come up on the PC3 software. Are we not able to adjust timing on our bikes? Is Lloydz timing wheel the only way to do that? The power commander seems extremely basic and not what i was expecting. Are there any more functions besides fuel tables, such as rev limiter adjustments etc? Also are there any other mods that you guys do with the 100ci motors like they do on the 106's like unplugging o2 sensor etc? Thanks for any help guys



OhioPatriot308 is offline  
Sponsored Links
Advertisement
 
post #2 of 10 (permalink) Old 06-18-2015, 06:43 AM
Lifetime Premium
 
Motorbikerx's Avatar
 
Join Date: Dec 2013
Location: Gold Coast, Australia.
Posts: 8,481
Garage
Default

Dont worry about your front axle as thats how they are, theres a machined step on the axle that you cant see until you remove the axle.
Youre not the first to worry about it and wont be the last.
I have a 100 cube Vegas 2010 model and it responded very well to some basic breathing mods and ATS

Victory Vegas 2010
Lloydz 109"cube big bore
" " 495 cams
" " TorqueTubes
" " timing wheel @4 deg.
" " Primary plate
" " IAV
RPW Slash pipes
PCV
Progressive 465 rear shock
Kingpin USD Forks
18" XC front wheel
1 3/4" 'Burleigh Bars'
Stebel air horn
12.106 @110.90mph
114/123

Victory Cross Country 2010 (106)
Lloyds air filter
" " VM1 Cams
Home gutted exhaust
Maximus
Both tuned by [email protected] Dyno
110/116

Gold Coast
Australia
Motorbikerx is offline  
post #3 of 10 (permalink) Old 06-18-2015, 07:52 AM Thread Starter
Member
 
Join Date: Jun 2015
Posts: 57
Default

Thanks I should have inspected that a little more. What's ATS stand for
OhioPatriot308 is offline  
Sponsored Links
Advertisement
 
post #4 of 10 (permalink) Old 06-18-2015, 09:13 AM
Lifetime Premium
 
zxmikez's Avatar
 
Join Date: Sep 2010
Location: Albany ny
Posts: 29
Default 07 amigo

I also have an 07, mine is the "Premium" model. That means it goes slower under the extra weight of the chrome add ons.

Very good experience with the bike so far- I added Lloyds torque tubes, a Lloyds fuel controller, a Vic touring seat that I switch out occasionally, and it came from the PO with Vic shotgun pipes. Move to the one size larger metzler rear tire when you are ready- it makes difference.

I also switched out the Ness bars that were on it to the factory V bars- much more sporty and comfortable at speed.

enjoy

2007 Hammer Premium
zxmikez is offline  
post #5 of 10 (permalink) Old 06-18-2015, 09:18 AM
Lifetime Premium
 
Motorbikerx's Avatar
 
Join Date: Dec 2013
Location: Gold Coast, Australia.
Posts: 8,481
Garage
Default

Quote:
Originally Posted by OhioPatriot308 View Post
Thanks I should have inspected that a little more. What's ATS stand for
ATS is the timing wheel, nice looking Hammer you got there!

Victory Vegas 2010
Lloydz 109"cube big bore
" " 495 cams
" " TorqueTubes
" " timing wheel @4 deg.
" " Primary plate
" " IAV
RPW Slash pipes
PCV
Progressive 465 rear shock
Kingpin USD Forks
18" XC front wheel
1 3/4" 'Burleigh Bars'
Stebel air horn
12.106 @110.90mph
114/123

Victory Cross Country 2010 (106)
Lloyds air filter
" " VM1 Cams
Home gutted exhaust
Maximus
Both tuned by [email protected] Dyno
110/116

Gold Coast
Australia
Motorbikerx is offline  
post #6 of 10 (permalink) Old 06-20-2015, 12:42 PM
Senior Member
 
Marius's Avatar
 
Join Date: Oct 2011
Location: Metairie, near New Orleans
Posts: 566
Default

Ignition timing is not adjustable through pc3 on our bikes, but I think it's the same with the 106 engine. That is the purpose of the timing wheel. Also, our 100ci engines are not setup with o2 censors, so that's one less thing to worry about.

In terms of performance upgrades, a 2-1 exhaust pipe and loyds torque tube intake seems to be the best bang for the buck. You can get cams too if you wish, but that seems to boost more higher rpm power at the expense of low end tq. Unless you are drag racing and need every bit, I'd skip that. I prefer power to come in earlier for street use, but that's just my preference...

Congrats on the new bike man! And welcome to the club

2007 Victory Hammer (Nuclear Sunset)
2012 Vstrom Adventure 650
2006 Suzuki M50 (Black) - Traded
1995 Mustang GT... Work in Progress...

Last edited by Marius; 06-20-2015 at 12:49 PM.
Marius is offline  
post #7 of 10 (permalink) Old 07-08-2015, 08:01 AM Thread Starter
Member
 
Join Date: Jun 2015
Posts: 57
Default

One question i have with the pc3 that i have yet to find on the internet is.. Is it possible to download the current ecm tune onto your PC3? My bike has the stage 1 map installed and i want to take that tune and add a little fuel to it once i install the timing wheel. If I cant i'm just going to let the PC3 sit uninstalled until i do cams and get it dyno tuned. Because from what i gather the Stage 1 tune its pretty good and with the TPS sensor being different on every bike a generic tune might not work.
OhioPatriot308 is offline  
post #8 of 10 (permalink) Old 07-08-2015, 11:01 AM
Senior Member
 
visionjohnny's Avatar
 
Join Date: Sep 2010
Location: minnesota
Posts: 12,871
Default

Quote:
Originally Posted by OhioPatriot308 View Post
One question i have with the pc3 that i have yet to find on the internet is.. Is it possible to download the current ecm tune onto your PC3? My bike has the stage 1 map installed and i want to take that tune and add a little fuel to it once i install the timing wheel. If I cant i'm just going to let the PC3 sit uninstalled until i do cams and get it dyno tuned. Because from what i gather the Stage 1 tune its pretty good and with the TPS sensor being different on every bike a generic tune might not work.
you should say what year and model you have so we can answer you

2008 Vision
Mpls, MN.

Please add your state and model of bike you have. Click user CP @ top of page and then far left click edit signature. Thanks
visionjohnny is online now  
post #9 of 10 (permalink) Old 07-08-2015, 07:49 PM
Lifetime Premium
 
Motorbikerx's Avatar
 
Join Date: Dec 2013
Location: Gold Coast, Australia.
Posts: 8,481
Garage
Default

Quote:
Originally Posted by visionjohnny View Post
you should say what year and model you have so we can answer you
Go to the top of the page VJ and all will be revealed
Ohio Patriot 308 , it is a good idea to fill out your profile signature for future reference on what you ride etc

Victory Vegas 2010
Lloydz 109"cube big bore
" " 495 cams
" " TorqueTubes
" " timing wheel @4 deg.
" " Primary plate
" " IAV
RPW Slash pipes
PCV
Progressive 465 rear shock
Kingpin USD Forks
18" XC front wheel
1 3/4" 'Burleigh Bars'
Stebel air horn
12.106 @110.90mph
114/123

Victory Cross Country 2010 (106)
Lloyds air filter
" " VM1 Cams
Home gutted exhaust
Maximus
Both tuned by [email protected] Dyno
110/116

Gold Coast
Australia
Motorbikerx is offline  
post #10 of 10 (permalink) Old 07-09-2015, 05:28 AM Thread Starter
Member
 
Join Date: Jun 2015
Posts: 57
Default

Quote:
Originally Posted by visionjohnny View Post
you should say what year and model you have so we can answer you

For someone with 7,000+ posts you should realize you have to read the first post Its a 2007
OhioPatriot308 is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Victory Forums - Victory Motorcycle Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools Search this Thread
Show Printable Version Show Printable Version
Email this Page Email this Page
Search this Thread:

Advanced Search
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome