A friend of mine made this spacer of 7 mm. This is on the right side of the rim. (see photo above). This is not from Arlen Ness Chrome G3 10,5 x18
You also need to make a spacer of at least 3-4 mm in front. If not, the belt does not track properly. You can see this when everything is assembled.
Seeing that someone writes that 10 "rims are better suited to 300 tires. I do not agree with this.
Take the challenge of adapting 10.5 "rims. There will be some extra work. Then everything becomes optimal.
I have now run over 12,000 km of my bike in the summer and it has been a pleasure. The handling works very well. Be careful when you do this procedure.
Best of luck. You will all be happy;-)
Yeah so spacers need to be made up, but Im told the Hammer swingarms are slightly different, so the spacers may be different to the above. I'm going to contact a Victory specalist mechanic and see if he can make the spacers for me, and maybe (hopefully) get him to fit it also, and I'll let you know the details and post photos.
2012 Hammer S
Freedom Performance pipes now wrapped, PCV, Loyds air filter, ATS, Loyds Cams and 1/4 Turn Throttle adj, Progressive rear shock
300mm rear and 23" front