LED turn signals installed...only one works?
Ok, so i drove down to JP cycles today and picked up a kit made by Whitewall Choppers. It came with all 4 LED turn signals, mount bracket for the rear and a load equalizer. No instructions what so ever. Checked their site, no instructions.
I hooked up all the lights, black wire of each signal to the black wire on the bike. And the yellow wire of the lights to the colored wire on the bike. Now the only signal that works is the right rear. I have not hooked up the load equalizer yet, because i have no idea where it gets spliced in at. I'm pretty sure it is done somewhere under the seat, but not sure. Figured i would see what the professionals on here would say.
The whole reason i went with new signals is the cheap alternative i did for LED turn signals last summer went bad. Before i left on deployment, i had the front left quit working. I came back after the bike sat for 6 months, and the only one that worked was the front right. I'm clueless on what is going on. I double checked my connections. The bike is an 2005.
Thanks for the help.