Touring Seat - Will It Fit Or Not? - Victory Forums - Victory Motorcycle Forum
Reply
 
LinkBack Thread Tools Search this Thread Display Modes
post #1 of 12 (permalink) Old 07-15-2014, 08:43 AM Thread Starter
Member
 
Hellburn10's Avatar
 
Join Date: Feb 2014
Location: Sydney, Australia
Posts: 35
Default Touring Seat - Will It Fit Or Not?

Wondering if anyone could tell me if the seat below will fit my 2012 Hammer LE? Is there any difference between the 2012-2014 8balls and the 2012 and 2014 Hammer LE's? It's a very good price from what I can find. Any help would be great.

http://www.motosport.com/AU/cruiser/..._source=topnav
Hellburn10 is offline  
Sponsored Links
Advertisement
 
post #2 of 12 (permalink) Old 07-15-2014, 09:04 AM Thread Starter
Member
 
Hellburn10's Avatar
 
Join Date: Feb 2014
Location: Sydney, Australia
Posts: 35
Default

I guess to that end...............what fits what? Will all hammer parts and accessories fit all 2012 to 2014 hammers (8ball, Hammer s, Hammer s LE)?

The only exceptions would be the brakes on the 2012 models are different that the 2014's?
Hellburn10 is offline  
post #3 of 12 (permalink) Old 07-15-2014, 09:37 AM
Lifetime Premium
 
LILMAGS500's Avatar
 
Join Date: Apr 2013
Location: Peoples Republic of Massachusetts
Posts: 9,684
Garage
Default

Yes , this will definitely fit you Hammer .

2014 Cross Country
2014 XC , Lloyds A/F , Timing Wheel +4 , PCV , Miller Mufflers , 1/4 Turn Throttle Ring , Dyno Tuned by KMC Powersports 98HP 113 TQ
LILMAGS500 is offline  
Sponsored Links
Advertisement
 
post #4 of 12 (permalink) Old 07-15-2014, 09:38 AM
Lifetime Premium
 
LILMAGS500's Avatar
 
Join Date: Apr 2013
Location: Peoples Republic of Massachusetts
Posts: 9,684
Garage
Default

Its very comfy too I might add , my wife loves it !

2014 Cross Country
2014 XC , Lloyds A/F , Timing Wheel +4 , PCV , Miller Mufflers , 1/4 Turn Throttle Ring , Dyno Tuned by KMC Powersports 98HP 113 TQ
LILMAGS500 is offline  
post #5 of 12 (permalink) Old 07-15-2014, 09:41 AM Thread Starter
Member
 
Hellburn10's Avatar
 
Join Date: Feb 2014
Location: Sydney, Australia
Posts: 35
Default

Thanks Mags. Will pull the trigger on it.

Need to mount it so I can install for when the old lady wants to go for a ride. I remember reading a thread on here to do that.
Hellburn10 is offline  
post #6 of 12 (permalink) Old 07-15-2014, 09:45 AM Thread Starter
Member
 
Hellburn10's Avatar
 
Join Date: Feb 2014
Location: Sydney, Australia
Posts: 35
Default

Mags what's your take on fitting other 2012 or 2013 or 2014 hammer parts across the hammer range? Any issues you can think of?

2012 Hammer S Limited Edition
Hellburn10 is offline  
post #7 of 12 (permalink) Old 07-15-2014, 10:52 AM
Lifetime Premium
 
LILMAGS500's Avatar
 
Join Date: Apr 2013
Location: Peoples Republic of Massachusetts
Posts: 9,684
Garage
Default

Sorry for the delay , I'm at work .... If you are going to be swapping from the touring seat to your stock seat on a regular basis , I highly recommend installing studs in your new seat and using nuts . It will go on and off in minutes , but trying to line up the bolts and getting them into the seat sucks if you are going to be doing it regularly . As far as parts interchanging , some are obviously different but many are interchangeable , especially accessories . Hope this helps !

2014 Cross Country
2014 XC , Lloyds A/F , Timing Wheel +4 , PCV , Miller Mufflers , 1/4 Turn Throttle Ring , Dyno Tuned by KMC Powersports 98HP 113 TQ
LILMAGS500 is offline  
post #8 of 12 (permalink) Old 07-15-2014, 01:36 PM
Senior Member
 
Join Date: Jun 2013
Location: coal township, pennsylvania
Posts: 1,394
Default OE victory parts

victory likes to use similar fitments for most bikes + models. i recently fitted a second disc to my 13 hammer from the "international" hammer, we do not have an S model in the USA anymore. checking the OE parts diagrams + comparing delivered pricing is the best solution.
rodhotter is offline  
post #9 of 12 (permalink) Old 08-02-2014, 09:26 AM Thread Starter
Member
 
Hellburn10's Avatar
 
Join Date: Feb 2014
Location: Sydney, Australia
Posts: 35
Default Missus gave the thumbs up!

Got my touring seat the other day and mounted it this afternoon. Bit of a pain lining up the front having to stretch the holes a little. Best part is the missus is pleased as she really finds it comfortable.

2012 Hammer S Limited Edition
Hellburn10 is offline  
post #10 of 12 (permalink) Old 08-02-2014, 09:39 AM
Lifetime Premium
 
LILMAGS500's Avatar
 
Join Date: Apr 2013
Location: Peoples Republic of Massachusetts
Posts: 9,684
Garage
Default

Hell , instead of bolts I screwed studs into mine , then just put the nuts and washers on from underneath . On and off in less then 3 minutes . And it lines right up , you don't have to break your balls doing it !

2014 Cross Country
2014 XC , Lloyds A/F , Timing Wheel +4 , PCV , Miller Mufflers , 1/4 Turn Throttle Ring , Dyno Tuned by KMC Powersports 98HP 113 TQ
LILMAGS500 is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Victory Forums - Victory Motorcycle Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools Search this Thread
Show Printable Version Show Printable Version
Email this Page Email this Page
Search this Thread:

Advanced Search
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome