Victory Motorcycle Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
147 Posts
Discussion Starter #1
I have a 2008 Jackpot.. Need to know how to remove the triple tree enough to slid the MBW Wrap Around LED on the fork..

Any videos or advise.. Please..
 

·
Registered
Joined
·
526 Posts
You don't need to remove the triple tree. Just loosen the 4 pinch bolts on each side and follow the directions that came with the signals. It was pretty easy, I just did mine tonight. Be sure to check your bikes signal wiring to see if it's reversed.
 

·
Registered
Joined
·
156 Posts
Just follow the instructions that came with them. I used an engine hoist with straps around the risers to lift the front end up. Do both sides at the same time, I found the shocks slid down about a 1/4 inch at a time really easily, otherwise you are fighting the compression of the springs.
Super easy.
 

·
Registered
Joined
·
526 Posts
I got one at Pep Boya a few years ago for like $30 with a $30 rebate. Or if you have a Harbor Freight near you they have them pretty cheap. Also Sears has them for around $100.
 
1 - 5 of 5 Posts
Top