Victory Motorcycle Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter #1
Well this morning on my ride into work, my fuel light came on. This struck me as odd, as I had just refueled 35 miles prior. I topped off the gas tank, and it only took a gallon. When pulling into the gas station, my turn signals failed to operate.

Mods are as follows: rear turn signal flush mount led, Lloyd's fuel controller, ATS, intake, and some conquest customs octane pipes.

Any help would be greatly appreciated!

Pauly C.


Sent from Motorcycle.com Free App
 

·
Registered
Joined
·
11 Posts
Discussion Starter #3
Are you running LED's just in the rear? Do you have a load equalizer in line and are any of the mods you listed new as in recently installed?
Yes, LEDs only in the rear, stock up front. No, I do not have a load equalizer. I installed the mods in January, about 4000 miles ago
 

·
Moderator
Joined
·
12,984 Posts
if you have a fast flashing turn signal then yes you need a load equalizer.

Pull seat and with 10mm wrench check to see if battery bolts are tight
 

·
Registered
Joined
·
11 Posts
Discussion Starter #5
if you have a fast flashing turn signal then yes you need a load equalizer.

Pull seat and with 10mm wrench check to see if battery bolts are tight
I have one fast blinking, and one regular blinking. I'll look into getting a load equalizer. Are they all the same, or is one model better than another. Anyone have a suggestion which one to get?

I'll check the battery connection today.

I was thinking there might be a ground somewhere.
 
1 - 5 of 5 Posts
Top