Victory Motorcycle Forum banner

1 - 20 of 86 Posts

·
Registered
Joined
·
111 Posts
Discussion Starter #1
Just spoke to Sonia at 7Jurock Plastics. They are now producing a "flip" design replacement windshield for the XC, just add $25.00 to the prices of the windshield shown on their website.

Product Information:
7Jurock replacement windshield for VICTORY CROSS COUNTRY 2010-UP Models follows the same lines and contours as the Victory (OEM) original windscreen. 7Jurock offers: 7" – 20" Height. This windshield provides excellent body protection. Beautifully handcrafted from 0.187 (3/16") thick cast military aircraft grade acrylic, specified for optical clarity. Available in Clear and Light Gray. All shields are D.O.T. approved and are manufactured to order. Edges are hand ground and polished. CNC cut and drilled ready to install. Height is measured along the center line of the windshield.

http://www.7jurock.com/store/index.php?act=viewProd&productId=328

Here is a pic she sent me of the Flip Windshield
 

Attachments

·
Registered
Joined
·
1,071 Posts
Just spoke to Sonia at 7Jurock Plastics. They are now producing a "flip" design replacement windshield for the XC, just add $25.00 to the prices of the windshield shown on their website.

Product Information:
7Jurock replacement windshield for VICTORY CROSS COUNTRY 2010-UP Models follows the same lines and contours as the Victory (OEM) original windscreen. 7Jurock offers: 7" – 20" Height. This windshield provides excellent body protection. Beautifully handcrafted from 0.187 (3/16") thick cast military aircraft grade acrylic, specified for optical clarity. Available in Clear and Light Gray. All shields are D.O.T. approved and are manufactured to order. Edges are hand ground and polished. CNC cut and drilled ready to install. Height is measured along the center line of the windshield.

http://www.7jurock.com/store/index.php?act=viewProd&productId=328

Here is a pic she sent me of the Flip Windshield
they are a great company to work with. i had a custom
sized shield made for my cross roads. taller ,wider,and
lower. they did a great job. now doing a set of lowers
to spec.--irv
 

·
Registered
Joined
·
2,699 Posts
LRS never responded to the emails I sent to see if they could do a flip windshield for XR (they do for Road Kings) so I emailed 7Jurock. So far nothing but if they answer back and say they can make a XR flip I'll post on here and see if there's any interest.
 

·
Registered
Joined
·
1,071 Posts
why is it nobody wants to talk on the phone ? i did most
of my communicating w/ 7jjurock by talking to a real
person .call me old or old school[which i am] but 1 on 1
seems to get things done quicker and more complete w/o
problems. but here i am typing with 2 fingers into cyberspace.
i know we dont want to be bothered and remain anonymous,
but ive met a few great people on this forum, some personally.
i still like a live voice to talk to. sonia at 7jurock was very
helpful. its almost like instant messaging, which i dont know how
to do either.--take all this in a light hearted manner from an old
geezer--irv
 

·
Premium Member
Joined
·
13,276 Posts
Might have to see if they will send me a flip shield without the holes drilled. Doesn't look like LRS is moving in that direction anytime soon even though I like the shield I'm using from them right now.
 

·
Registered
Joined
·
2,699 Posts
Irv,
I prefer to use the phone but phone calls aren't always the best option. If you call a buisness during non-buisness hours you have no choice but to call back later. If you email a buisness hours don't really matter because they'll get the email when they get to work.

Another advantage is that if you are questioning a product and they have pictures they can send them back to your email address. If you're calling and have no email the only way you'll get the pictures is to get them to mail them to you (unless they can get them to fit in the tiny holes in the phone reciever).

If "geezer" is an indication that you consider yourself old always remember you're only as old as you feel!
 

·
Registered
Joined
·
1,071 Posts
yes,we emailed back and forth too with drawings when i
had my w/shield made. now i also know what the holes are
for in the telephone receiver![lol]--irv
soon to be 64 is old
 

·
Registered
Joined
·
111 Posts
Discussion Starter #8
LRS never responded to the emails I sent to see if they could do a flip windshield for XR (they do for Road Kings) so I emailed 7Jurock. So far nothing but if they answer back and say they can make a XR flip I'll post on here and see if there's any interest.
What I suggest is to call Sonia at 7Jurock, If it goes to voice mail, don't worry, she will call you back, then tell her to expect an e-mail. She will respond. That's what I did when I placed my order for the 14" Flip. Hopefully customer service after delivery is going to be as good as it was prior to purchase (if its needed).
 

·
Registered
Joined
·
154 Posts
I have purchased three shields from this company, good product at a reasonable cost. I have talked with them on the phone as well.

I do have one of their shields for sale for a XC, it is a 11 inch with light tint-excellent shape-just to short for the wife. Paid 135 plus shipping, will sell for 50.00 plus shipping. It is packaged in the original box with instructions.

Contact e-mail, [email protected]

Thanks
 

·
Registered
Joined
·
2,699 Posts
7Jurock Flip Windshield for Cross Roads

After seeing Tonz's 7Jurock post and hearing HD Road King owners that were happy with flip windshields I emailed them to see what they can do for Cross Roads. I got an email from them today and was glad to see that not only are their windshields highly rated and inexpensive they do offer a flip option. Their windshieds also come in a variety of heights and widths so if you're interested call the number below and/or visit www.7jurock.com and see what they can do for you.


Dear Brian,

We do offer a FLIP option for the Victory Cross Roads. The FLIP option is an additional $25. That option is not available on our website yet, but you can call us to place to your order over the phone. If you have any other questions or concerns, please let us know. You can also contact us at (909) 634-8548. Thank you for your interest in our products. We hope to do business with you soon.
 

·
Registered
Joined
·
2,699 Posts
The top edge of the windshield curves outward to direct the air travelling up the windshield. The theory is that the curve will push air over your head so a shorter winshield will function as good as or better than a winshield several inches taller.
 

·
Registered
Joined
·
810 Posts
These guys are 5 miles from me- I'll go check them out next week... I was thinking of going with a tinted cee-bailey sheild, may go this route instead.
 

·
Registered
Joined
·
1,071 Posts
pick up my lowers for me .they are making a custom set for the
vic brackets. they just custom made a w/shield to my specs.
solved all my wind problems.very nice job! would recommend
them to anyone.a fellow on an unnamed forum said it was
the "biggest freakin" one he had ever seen. my own personal
plexifairing.

.
 

·
Registered
Joined
·
2,699 Posts
Irv,
I saw the pictures, normally that sized pane is reserved for office buildings. Be careful pulling wheelies because if you're going fast enough you'll turn your bike into a hang-glider!
 

·
Registered
Joined
·
1,071 Posts
my harley friend called it ugly.i call it the best thing that ever happened
to wind deflection. works great in cross winds. glad i could provide
a humorous diversion,but this thing flat out works
 

·
Registered
Joined
·
289 Posts
from what i have seen of the late commers - the gustaffon flip i have (per recommendations about 2 years back) is still the best...great seeing the critters flip over over head...
 

·
Registered
Joined
·
1,071 Posts
so you want a laugh at my expense. only one 4x8 sheet
of acrylic was humanely used up.feel free to properly
beat up on me. it looks much better from the side or
far, far away.--irv

this was taken before the 12 cc seat was put on. it seems
to be a little more comfy than the 11 cr seat. a little
different contour for my bucket and softer at the back.
joce says she likes it better too
 
1 - 20 of 86 Posts
Top