Victory Motorcycle Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
23 Posts
Discussion Starter #1
I have a 2009 vegas. I had LLoydz torque tubes put in along with a fuel controller. I also have RPW pipes with out the baffles. I had LLoydz dyno my bike 3 months ago. My problem is that it keeps back firing, what is causing this and how can I get this fixed?
 

·
Premium Member
Joined
·
978 Posts
Form what I understand, Lloyd sells an idle air control valve that will reduce the backfiring on the closed loop bikes.But it doesn't completely
get rid of backfiring. Since he did your work, why not give him a call. He is very helpful.
 

·
Registered
Joined
·
286 Posts
Idle air valve does help but like before mentioned...not completely. Shoot Lloyd an email and he should be able to give you some settings for fuel controller to help you out.
 

·
Registered
Joined
·
23 Posts
Discussion Starter #4
Thanks guy's, I do have an air idle controller that Loydz set up. I guess I will give him a call to see what he recommends.
 

·
Registered
Joined
·
442 Posts
would be interested to know if and how you fix this symptom. my bike is similarly configured and no matter how i adjust both the AIV and/or the fuel trims the popping on decel is intense... i know some is expected but the amount I have is unreasonable. I have even taken measures to use sealant on exhaust joints where i might have a leak.
 

·
Registered
Joined
·
46 Posts
I'm guessing the exhaust may be the culprit or be playing a part in it. We have seen problems with the downswept exhausts (especially on '08s) cause some issues with popping and backfiring on decel. The air valve does help, but isn't a cure all. Reach out to others with your type of exhaust and see if they have the same issues.
 

·
Premium Member
Joined
·
86 Posts
Check THOROUGHLY for exhaust leaks!
 
1 - 8 of 8 Posts
Top