Victory Motorcycle Forum banner

1 - 10 of 10 Posts

·
Premium Member
Joined
·
62 Posts
Discussion Starter #1
Was able to get her on the dyno today for some fine tuning with [email protected] 123.9 @ 145ft lbs. The 106hp pull was 2016...
 

Attachments

·
Premium Member
Joined
·
6,074 Posts
Did he like your bike ? Home build is the same as shop build ?

Andre using TaPaTaLk
 

·
Premium Member
Joined
·
62 Posts
Discussion Starter #3
I suppose its the same as a shop build with the execption that i did or mysel f and didn't have to pay labor...lol.

He seems to be super pumped with the results, but more importantly; i am!! 😋😋
 

·
Premium Member
Joined
·
4,875 Posts
I have to wonder why the HP levels-off so early, especially with headwork. My heads are stock and mine is still building power for another thousand rpm after yours levels off.

It seems like something is holding it back, like it's not going to wide open throttle or something is choking off airflow at high rpm. I think there's more in it.
 

·
Premium Member
Joined
·
62 Posts
Discussion Starter #5
Good observation HC. Ryan and I discussed it and are thinking it would produce more with better exhaust....
 

·
Premium Member
Joined
·
62 Posts
Discussion Starter #7
Well.....ya that isnt very legible is it?? And its upside down. I'll repost it this evening from my scanned copy....
 

·
Premium Member
Joined
·
62 Posts
Discussion Starter #8 (Edited)
Dyno Sheet take II

Green line is 2016. Red is this years build...Still hard to read, but not sure how to get it on here, legible, with a 20k file restriction...
 

Attachments

1 - 10 of 10 Posts
Top