Victory Motorcycle Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
103 Posts
Discussion Starter #1
Looking to purchase the Bassani turn outs, Im going from the Stage 1, 2 into 1 victory performance pipe.. My concern is do i need to get the pcm reflashed or are my current settings ok? Is it as simple as just swapping the pipes out? Any info please feel free to inform me..
cheers
 

·
Premium Member
Joined
·
13,706 Posts
You should be fine with the stage 1 flash. If you don't have the older style exhaust gaskets; you might want to pick them up before doing the swap. Lloydz sells them if you can't find them locally. If you end up with a lot of popping that annoys you; Lloydz has an IAV device to tone that down too.

http://www.lloydz.com/store/item_view.asp?estore_itemid=1000024


 

·
Registered
Joined
·
103 Posts
Discussion Starter #3
Thanks for input Bbob, another question might be a silly one.. But here it goes, is there a "break in" period for performance exhaust.. I have a tendency to be aggressive but don't want to ruin the new exhaust..


Sent from Motorcycle.com Free App
 

·
Premium Member
Joined
·
13,706 Posts
Thanks for input Bbob, another question might be a silly one.. But here it goes, is there a "break in" period for performance exhaust.. I have a tendency to be aggressive but don't want to ruin the new exhaust..
No break in period. The only thing to watch for is an overly lean condition. Red hot pipes near the heads, feels too hot between your legs, that kind of thing.

Chrome pipes almost always blue near the exhaust ports.
 

·
Registered
Joined
·
103 Posts
Discussion Starter #5
1 - 6 of 6 Posts
Top