Victory Motorcycle Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter #1
So I recently bought a 2012 highball. It came with basani pipes and a K&N filter. The previous owner didn't remap it or have a fuel programmer. Today I installed a cobra fi2000 programmer. When I started the bike it wouldn't run for more then a few seconds and fuel was coming out of one of the exhaust pipes. I rechecked all the connections and still the same issue. I took the programmer off and the bike runs fine. Any ideas???? I'm thinking its a bad programmer or they sent me the wrong one.
 

·
Super Moderator
Joined
·
6,371 Posts
If you check these forums, you'll see there isn't much love for that Cobra. I had one. However it never did that.
First thing to do is to take it out and see if the problem continues.

[EDIT] Tomorrow I go back to school for reading comprehension.
Definitely seems like a problem. There is a pot inside the Cobra you might be able to adjust. I believe mine was at about the 4 o'clock position.
 

·
Moderator
Joined
·
12,968 Posts
send it back to were you bought it from.
You'll have more problems than satisfaction
 
1 - 4 of 4 Posts
Top